1. shop checkoutCheckout
  2. shopping cart
    View Cart
  • GENERAL SALES HOTLINES
  • IRL 021 4315700   +353 21 4315700
  • UK 02382 123270   +44 2382 123270
  • TOP BRANDS
  • BEST PRICES
  • TECHNICAL ADVICE
  • FREE DELIVERY TO IRL & NI FOR ORDERS OVER 50

Deks Olje D1 - Saturator

Deks Olje D1 - Saturator

Ref: 85950

Deks Olje D1


Deks Olje pronounced "Deks Olya" is a varnish-like system with a proven track record in the marine environment for over 50 years. Consisting of 2 elements, D1 & D2, Deks Olje will give long life protection to both Soft and hardwoods while enhancing the woods natural beauty. The beauty of wood is largely due to the fact that it was once a living, natural material. Once felled, the natural oils in the timber dry out, a process not prevented by coating with a surface only treatment. The Deks Olje system is different in that it penetrates to the heart of the wood.

Deks Olje D1 is the special oil that saturates the wood, literally feeding it with oil to replace those lost. Driving out moisture and air, filling the woods pores with oil, it enriches and stabilises to provide lasting protection to interior and exterior timber.

Deks Olje D2 is the finish coat that is applied to wood treated with D1 for a high gloss finish. D2 provides a tough, flexible and durable surface that is easy to maintain. Easy to apply, the more coats of D2 that are applied the higher the gloss finish and there is no need to sand between coats. Unlike traditional varnishes, D2 will not craze or blister, and because of D1's penetrating qualities, will not peel or flake as water is unable to get into the wood where it can also cause unsightly stains.

Deks Olje is suitable for all wood types, interior or exterior, new or old. Deks Olje D1 is the special oil that saturates the wood, literally feeding it with oil to replace those lost. Driving out moisture and air, filling the woods pores with oil, it enriches and stabilises to provide lasting protection to interior and exterior timber.

- Can be applied to both horizontal or vertical surfaces.
- Saturates and protects all woods - Soft and Hard ; Oily and Dense.
- Excellent penetration - non-film forming.
- Replaces the natural oils lost from the wood - will not blacken the timber .
- Transparent - Enhances the woods natural grain.
- Deep penetrating, stabilises the timber - Protects against moisture ingress.
- Easy maintenance - no sanding or stripping.
- Used alone, gives a silken matt finish or overcoat with Deks Olje D2 for a high gloss finish


Hardwoods and Tropical Timber : Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai ...
Softwoods : Pine, Spruce, Larch ...
Exterior : garden furniture, patios, walkways, boat decks, topsides on boats, portals ...
Interior : flooring, paneling, stairs, doors, windows, door frames ...
Marine : Can be applied above or below the waterline. Excellent primer for conventional single pack marine coatings.
Horizontal - Vertical.

Application
Apply a coat of D.1 - Allow to penetrate for 15-30 minutes.
Apply a second application. Allow to penetrate for 15-30 minutes.
Repeat this procedure until the wood is saturated i.e. will accept no more oil.
Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
Do not allow D1 to become touch dry or dry between coats (apply "wet on wet").
Refer to the packaging for maintenance procedure.

Informations :
- Multicoat coverage : 1 à 4 m²/l
- Coverage rate for maintenance : 8 à 12 m²/l
- Application tools : Brush - Roller
- Application temperature : 5°C to +35°C
- Drying : 24 h.
- Setting up time before use : 3 days.
- Clean-up : White-Spirit


Total Price:36.33 / STG 31.97

(Including VAT)

Select Size