1. shop checkoutCheckout
  2. shopping cart
    View Cart
  • GENERAL SALES HOTLINES
  • IRL 021 4315700   +353 21 4315700
  • UK 02382 123270   +44 2382 123270
  • TOP BRANDS
  • BEST PRICES
  • TECHNICAL ADVICE
  • FREE DELIVERY TO IRL & NI FOR ORDERS OVER 50

International Cruiser 250 Antifoul 3L

International Cruiser 250 Antifoul 3L

Ref: 8541--

International Cruiser 250 Antifoul in 2.5l cans for seawater boats with max speed of 30 knots.

Please note: Delivery of International paint products within Ireland only


International Cruiser 250 Antifoul is a self-polishing antifouling providing quality year-long protection. Quick-drying and convenient, it can also help you get back on the water sooner.

Finish: Matt
Suitable for Boats slower than 25 knots
Coverage: 7.5m SQ per 750ml can
Antifoul Primer: International Primocon

If the boat hasnt been painted before, paint is incompatible or in bad condition then use Primocon first, See Related Products Below

International Cruiser 250 Antifoul is also suitable for Steel/Iron, Lead or Wood if first painted with International Primocon.


- Best value International antifoul for inshore saltwater boats
- One season’s protection in all but harshest fouling conditions
- One coat to save time
- For power (up to 25 knots) and sail boats
- Can be re-immersed within 24 hours
- Protects against all kinds of fouling
- Reduced preparation and application time
- Suitable for both powerboats and sailboats
- Replaces old International Cruiser Uno EU Antifoul 2.5 Litre



Theoretical coverage (m²/Lt): 10
Number of coats: 1 - 2
Substrates : GRP/FRP, Lead, Steel, Wood, Cast Iron
Suitable for high speed craft No
Application method : Brush, Roller
Suitable for high fouling areas: Excellent


In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with typically 80­120 grade paper. Do not dry sand. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.

In Poor Condition: Use Interstrip to remove all traces of antifouling.

Priming: All preparation for bare substrates is covered on the appropriate primer datasheet.

Bare GRP: Prime with Gelshield 200 for osmosis protection, or Primocon or Interprotect.

Steel/Iron/Lead/Wood: Prime with Interprotect or Primocon.

Thinning is not recommended. Antifouling performance can be compromised if correct dry film thickness is not applied.


Price:118.95 / STG 105.87

(Including VAT)


Related products:

International Primocon Antifoul Primer 750ml