€463.08

If you're looking for a reliable marine binocular for use around the water, look no further. The Navigator 7x50 works just perfect for wet conditions found during activities like boating.

Comes equipped with High-Contrast-Optics for brightest possible images in low light and maximum contrast in bright sunlight conditions or rough weather and the added comfort of the STEINER Sports-Auto-Focus. No need to constantly refocus: enjoy the fact that you can adjust for your vision once and enjoy sharp viewing for ever, in any situation even at varying or rapidly changing distances.

The shock-absorbing and abrasion-protected Makrolon fibre reinforced polycarbonate body with slip-proof tough rubber armour makes the Navigator 7x50 the perfect navigation binocular. The STEINER Waterprotect-System makes this binocular water pressure proof to 2m. Featuring a fog-free performance by using the unique 2-valve system of dry nitrogen filling.

The Navigator 7x50, the perfect model for practicality, dependability and economy in the same package.

- Weight: 1055g.
- Sealing: Waterproof (Nitrogen pressure sealed to 2m).
- Field of view @ 1000m: 118m. High contrast optics.
- Guarantee Period: 10 years


find out more

€699.00

Built in the same tradition as SeaStar Inboard Steering, these BayStar Systems are designed for relatively low
torque inboard applications, including inland waterway boats and other low speed displacement vessels
The systems are easy to install with 'cut-to-length' tubing.

Kits comprises:

Helm - HH4314
Cylinder - HC4645H
Tube Kit - HT420H ( 2 x 30ft Lengths)
Oil - HA4430
find out more

€45.00

find out more

€23.00

find out more

€9.99

find out more

€28.00

For use WEST SYSTEM 105 Resin for coating applications where an extremely clear finish is desired, especially when working in humid conditions. This hardener also provides excellent adhesion for bonding applications although 207 is not as cost-effective as 205 or 206 Hardeners. 207 contains an ultraviolet inhibiting additive which improves the resistance of a WEST SYSTEM 105/207 mix to sunlight. However, the cured epoxy surface still requires long-term UV protection with a quality marine paint or a UV filtered varnish.

207 Hardener must be mixed in the correct ratio of 3 parts by volume of 105 Resin to 1 part 207 Hardener.
find out more

€104.23

find out more

€21.01

A blended filler used to make fairing putties which are easy to sand but still reasonably strong on a strength to weight basis. Add 20 to 40% by weight to WEST SYSTEM epoxy mix. Cures to a dark reddish brown colour.

find out more

€33.00

As above for B Pack Resin Kit


find out more

€12.00

Thickening additive suitable for bonding, gap filling and filleting. It can be used to prevent resin flow on vertical and overhead surfaces and to control the viscosity of the epoxy. It is often used in combination with other fillers to control the working characteristics of an epoxy mix, e.g. improve the consistency of fairing compounds, to improve abrasion resistance etc. Add 2% to 10% by weight to the WEST SYSTEM epoxy mix. Cures to an off-white colour.
find out more

€15.00

Used in filleting applications when a natural finish interior is required. Alcohol or water based stains may be added to adjust the colour. Add 15% to 25 % by weight to the WEST SYSTEM epoxy mix. Cures to a tan colour.


find out more

€13.00

A filler developed to maximise bond strength in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling. Add 35% to 60% by weight to WEST SYSTEM epoxy mix. Cures to an off-white colour.

find out more