Tanks & Fittings

Stainless steel key to open Plastimo Deck Fillers with two hole, key points Dimensions Studs at 30mm Centres 

Maestrini marine grade bronze deck filler /plate 2021L ,accept 2 1/2" BSP Hose tail for hose and also suitable as an access to emergency through deck, tiller access. Specification Material- Bronze Thread Size 2 1/2" BSP Overall Dia.130mm Internal Dia :...

The most reliable and maintenance free tank sender on the market, now with plug and play NMEA2000 connectivity. The NMEA2000 N3 is also very easy to install. Wema's design provides accurate information even in difficult conditions Suitable for fuel,...

High quality, stainless steel Wema fuel and water tank senders with 1 1/4" BSP thread (S3) and European 0-190 ohm resistance.  Length 60cm. Over the years Wema S3 Tank Senders have been improved with advances in reed switch technology, allowing them...

This combination pack includes the Roca Deck Filler Waste Adaptor Neck and the Roca S/S Deck Filler Cap for Waste Water. For use with the Roca Stainless Steel Deck Filler Body 38mm.  See here      

Roca premium quality waste water filler cap for use in conjunction with Roca deck filler fittings. Featuring an intergrated opening key and elegantly-cast in electropolished, stainless steel, this deck filler cap has an elegant look and will suit...

Wema HFL 163306 stainless flange kit complete with gasket, inner ring and set of stainless screws with 1 1/4" female thread to take Wema standard stainless senders Accepts Wema S3/S3H Sensors

Handy strap down kits with 2 straps and snap buckles ideal for securing water and fuel tanks etc. Solid screw down bases hold strap to deck

Nuova Rade waste water tanks are used for storing toilet waste water until being able to safely discard it. BLIZZARD line of horizontal waste water tanks is made of odor-free high-density polyethylene material in brown color. Polyethylene material is...

The Can SB Fixed Fuel Tank 40ltr is high density polyethylene tank suitable for fuels or acids and comes with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 67ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 54ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 41ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 65ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 50ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

Fuel tank mod. Big-Joe  Tank made of eltex, ISO 13591 certified and compliant with ministerial decree.Complete with reserve.90% filling and cap with screw safety vent.This model is equipped with a self-fishing system with filter.ABYC U.S.A...

Fresh water tanks in high-density polyethylene.Supplied with a polyamide multi-purpose plate.Plate featuring : A 1½" water inlet (delivered as standard with a vent cap). A pickup fitting for hose Ø 17/19 mm (3/8" threaded). An additional...

Developed by the Plastimo R & D, a range of hatches which combines easy installation for the boatbuilder and optimised space for the crew's comfort.Optional locksTake-apart hatch top, ideal when height does not allow full vertical opening : with the...

High density polyethylene tank. Comes with multifunctional polyamide platinum. Dimensions: 800 x 350 x 230 mm (L x W x H). Platinum including: A 1" <>/<> fuel inlet (cap comes standard). One tip for engine supply hose Ø 7-9 mm...

High density polyethylene tank. Comes with multifunctional polyamide platinum. Dimensions: 650 x 350 x 230 mm (L x W x H). Platinum including: A 1" <>/<> fuel inlet (cap comes standard). One tip for engine supply hose Ø 7-9 mm...