Laser Performance Boats & Parts

Laser Performance Boats & Parts

CH Marine is the official Laser dealer for Ireland and Northern Ireland.

Add to Cart

Quick view

Harken Laser Topper Topaz Mainsheet Carbo Ratchet Block with Swivel - 57mm

Harken

RRP

€87.46

Was

Harken Carbo Ratchet Blocks allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Harken 57 mm Blocks feature Cam-Lock or U-Lock locking systems to lock the shackle in front or side positions, or swivel to...

HK2135

RRP

€87.46

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico/Bug Tiller Extension - 710mm

RRP

€30.95

Was

The modern Laser Bug or Pico Tiller Extension 71mm with flexible attachment joint included.For a full Laser Tiller and rudder see code: LS-8513.

LS-85187

RRP

€30.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Bottom (Drop Nose) Pin for a Laser Harken Kicker Swivel Cleat

Rooster

RRP

€17.95

Was

Drop nose pins have been around for a while, but never ones that are designed specifically for the diameters and sizes of the Laser® Harken Kicker unit. This bottom Pin is the perfect length to not interfere with...

ROOSTER-104338

RRP

€17.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Rooster Top (Drop Nose) Pin for a Laser Harken Kicker Swivel Cleat

Rooster

RRP

€17.95

Was

Drop nose pins have been around for a while, but never ones that are designed specifically for the diameters and sizes of the Laser® Harken Kicker unit. The overhaul length of the pin is 23mm and the shaft length (bearing surface part) is...

ROOSTER-104337

RRP

€17.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Rooster Spring Plate for a Laser Self Bailer

Rooster

RRP

€11.95

Was

These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute. NOTE: This...

ROOSTER-104347

RRP

€11.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Rooster Holt HT7020 Replacement Centreboard Stop Set for a Laser/Pico

Rooster

RRP

€6.95

Was

Replacement part, this item is of highest quality. Replacement parts are high quality replacements that perform the same function as the original part. They should not be confused with official parts bearing the Laser® registered trademark...

ROOSTER-104314

RRP

€6.95

Was

Add to Cart Quick view
Choose Options

Quick view

Laser IRL Sail Letter Set 12"

RRP

€2.95

Was

12" IRL Sail Letters are designed for racing dinghies more than 3.5m long. This item only includes the individual letters: order 1 x I, 1 x R and 1 x L for a full sail markings set{Rules}Boats racing under the Racing Rules of Sailing must display a Sail...

RRP

€2.95

Was

Choose Options Quick view
Add to Cart

Quick view

Laser 4.7 Dinghy incl. Race Rig

Laser

RRP

€6,625.00

Was

The Laser 4.7 Race features the Harken Race upgrade cunningham outhaul kit, Harken Race upgrade vang, gorilla tiller and extension, sail, Harken ratchet block and a padded toe strap. The Laser 4.7 features the same hull as the Laser and Laser Radial; a...

LS-BT00001

RRP

€6,625.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser 4.7 Dinghy incl. XD Rig & Composite Upper

Laser

RRP

€7,219.00

Was

The Laser XD 4.7 rig is available for race oriented sailors. The Laser 4.7 features the same hull as the Laser and Laser Radial; a smaller sail plan make it more manageable for lighter and younger sailors. The Laser 4.7 Dinghy is the next step into...

LS-BT00002

RRP

€7,219.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Boom Clamcleat CL211

Laser

RRP

€10.95

Was

The Laser Clamcleat CL211 will fit on the Boom of your Laser, Laser Pico, Laser Bahia and Funboat. The Clamceat will also fit on your Laser Hull.

LS-91327

RRP

€10.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Boom Fairlead

Laser

RRP

€2.95

Was

The Laser Boom Fairlead in blue plastic to tie the clew hook to the boom. Also used for traveller or boom outhaul.Fitting requires rivets: 3/16" x 3/4" (sold seperately). Also used for Clew Outhaul Fairlead on Laser Pico.

LS-91308

RRP

€2.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Boom Fairlead w/ SS Insert

RRP

€6.95

Was

This large, blue plastic Laser Boom Fairlead has a stainless steel insert to reduce chafing and allow larger lines with heavier loads.Also suits the Topaz deck fairleads.Requires 2 x screws (6mm x 25mm, see related products). Colour: BlueHole Dia. : 16mm

LS-91319

RRP

€6.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Boom with Harken Blocks

RRP

€275.00

Was

The Laser Boom is fitted as standard with Harken ball bearing blocks. The Laser Boom is also fitted with end plugs and ready for sailing.

LS-89407

RRP

€275.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Composite Upper Mast

RRP

€645.00

Was

Laser Composite Upper Masts help a void the bending that can occur in aluminium Laser Masts! The long-awaited new Laser Composite Top Mast though built to the exact same design in mind as the previous, boasts durability and ease of use. Delivery...

LS-SP00002

RRP

€645.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Daggerboard - Infused

RRP

€545.00

Was

Laser Daggerboard Infused

LS-85030

RRP

€545.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Daggerboard Stop Set 85236

Laser

RRP

€6.95

Was

Laser Daggerboard Stop Set 85236- Snap together pieces.- Original equipment on Laser and Sunfish sailboats.

LS-85236

RRP

€6.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Friction Pad - MK1

RRP

€2.95

Was

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

LS-85239

RRP

€2.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Gooseneck

RRP

€26.95

Was

Stainless steel gooseneck for Standard, Radial and 4.7 lower mast attached with rivets

LS-91504

RRP

€26.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Gorilla Tiller & Extension

Laser

RRP

€139.00

Was

The very popular Gorilla Tiller from Laser is made to last! It is the official replacement to your existing tiller and extension as well as being suitable for racing and competition events.The Gorilla tiller and extension suits all Laser, Radial and 4.7...

LS-85201

RRP

€139.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Hatch 4" - Pico

RRP

€13.95

Was

The Laser 4" Hatch come with a the lid and surrounding housing. Constructed in white plastic suitable as a Laser Pico Hatch replacement.

LS-91325

RRP

€13.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Hiking Strap Plate - Pico & Laser1

Laser

RRP

€1.95

Was

The Laser/Pico Toe Strap plate is plastic and used to spread the load when attaching toe strap or MK1 Laser friction pad.Suits Laser1 and Laser Pico Toe Straps.

LS-91130

RRP

€1.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Infused Rudder Blade

RRP

€329.00

Was

Laser Infused Rudder is a GRP foil that is race legal, this is just the blade and wil require a stock.

LS-85118

RRP

€329.00

Was

Add to Cart Quick view
Choose Options

Quick view

Laser IRL Sail Letters 9"

RRP

€2.99

Was

9" IRL Sail Letters are designed for racing dinghies more than 3.5m long. This item only includes the I. R and L ordered seperately.{Rules}Boats racing under the Racing Rules of Sailing must display a Sail Number. A boat racing under any rating rules...

RRP

€2.99

Was

Choose Options Quick view
Add to Cart

Quick view

Laser Lower Mast Section - 4.7

RRP

€205.00

Was

The Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings. The Laser 4.7 Lower Mast is pre-bent with 5 degree angle.

LS-89037

RRP

€205.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Lower Mast Section - Radial

RRP

€229.00

Was

The Laser Radial bottom mast section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings.

LS-89036

RRP

€229.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Lower Mast Section - Standard

RRP

€239.00

Was

The Laser Standard/Full bottom section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings.

LS-89035

RRP

€239.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Mainsheet Ratchet Block - Classic

Harken

RRP

€70.00

Was

Harken Classic Ratchet Blocks 57mm allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. This block is perfect as mainsheet block for Laser Standard, Radial, 4.7 or a Sunfish.Add 1 x LS-91217 stand up...

LS-91333

RRP

€70.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Boom

Laser

RRP

€169.00

Was

Replacement Pico Boom with cleat, outhaul and boom block.Official Laser parts constructed from aluminium.

LS-89406

RRP

€169.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Centre Hiking Strap

RRP

€28.95

Was

The official Laser Pico Hiking Strap has padding on both sides and fits between the two toe straps just behind the daggerboard.Mounting screws sold seperately : M5 X 2MM pan head.

LS-83112

RRP

€28.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Clam Cleat Starboard

Laser

RRP

€1.95

Was

The Laser Clamcleat fits onto the Pico Boom using 3/16" x 5/8" rivets (sold seperately) and is used to secure the outhaul sheet. The side entry fairlead allows ropes to be jammed in for cleating but easily removed when needed. - Cleat made from aluminium...

LS-91065

RRP

€1.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Clew Hook

Laser

RRP

€31.95

Was

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

LS-85242

RRP

€31.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Daggerboard Plate

RRP

€49.95

Was

The official Laser Daggerboard Plate replacement firts Laser Pico's only.Made from black plastic, positioned above the shim and holds the daggerboard in place.Mounted using 6 x screws (M5 X 2MM) sold seperately.

LS-85244

RRP

€49.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Dolly

RRP

€359.00

Was

The Seitech Laser Pico Dolly is scaled perfectly for the Pico and the user. The balance point between the sling and the hull make it easy for even the youth sailor to tow. The sling design also makes it easy to solo launch and retrieve the Pico. Extra P9

LS-70001

RRP

€359.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Drop Nose Pin

RRP

€25.95

Was

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahia.Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

LS-90658

RRP

€25.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Gooseneck

Laser

RRP

€13.95

Was

The Laser Pico Gooseneck is the plastic u shaped fitting that attaches the mast to the boom while allowing it swing freely. Comes with U shaped clamp and boom insert.

LS-85243

RRP

€13.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Lower Mast

Laser

RRP

€165.00

Was

The Official Laser Lower Mast to replace the mast on a Laser Pico. Aluminium tube with all fittings included.

LS-89016

RRP

€165.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Mainsheet Block

RRP

€46.95

Was

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

LS-91549

RRP

€46.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Mast Gate Claw

RRP

€25.95

Was

The replacement Mast Gate Claw for the Laser Pico made in black plastic from Official Laser Sailing products.

LS-91479

RRP

€25.95

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Mast Gate Kit

Laser

RRP

€139.00

Was

Direct Laser Pico mast gate assembly which includes claw and mast gate pin but screws sold seperately.Screws Required:2 x M6 x 20mm Cheesehead Screws4 x M6 x 16mm Cheesehead/Pan Screws

LS-90662

RRP

€139.00

Was

Add to Cart Quick view
Add to Cart

Quick view

Laser Pico Mast Sleeve

Laser

RRP

€4.95

Was

The Mast Sleeve to suit the Laser Pico is fitted using 1 x 3/16" x 5/8" rivets (not included)Made in black plastic.

LS-90669

RRP

€4.95

Was

Add to Cart Quick view

Items 1 to 40 of 134 total

1
2
3
4
Next