Laser

Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not nlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets

Holt Laser Pico Lower Mast all fittings included - This is a high quality replica product Specifications Tube material: Aluminium Length - 2.25m Diameter 7cm Weight - 4kgs.

High quality Ovington GRP infused ILCA /Laser Daggerboard to suit all model ILCA Dinghies - Fully approved for use in ILCA events from Olympics to Provincials. Also suits 4.7, Radial and Standard Rig...

Nautos Autobailer to suit all model Laser and ILCA sailing dinghies, comes as a complete swop-out assembly with fixing scrww

Laser Bahia / Vago mast jib sheave box with nylon pulley  90623 - (Selden 505-071-01 )

Laser Pico Stacking Lauching Trolley - This is one on the most popular launching trollies for Laser Pico, built in galvanised steel, it quickly connects to the Laser Pico Road Trailer and is also...

Sowester nylon launching trolley wheel washers suitable for Laser/ ILCA stacking trollies and others dollies or trailers with 25mm axle diameter - Pack of 2  Features  Heavy Duty 27mm...

Laser Boom Block Stainless Eye Strap  40mm Hole Centres For attaching both blocks to Laser booms Fasteners Use 2 x 4.8mm  x 12mm  Stainless Steel Rivets We recommend using Duralac...

The Laser Kicker Vang Upper Block come with a curved kicker key that slides into a slot on the boom. This is the club version which is perfect for training and practice. The block is also suitable...

The Laser Outhaul Primary Dyneema Line 4mm x 1.5m is used to fasten the sail to the boom while controlling the shape and curve of the sail. It runs from the clew hook to the fairlead at the end of...

Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.

Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.

Aluminium Funboat tiller with red handle - fitted with universal joint

Self-tapping grommets for Laser traveller fair leads. This items is placed under the deck to receive the screws from the traveler fairlead - It serves to hide the exposed screw but also add strength...

Laser Bailer Bands that are supplied in a pack of four. Having trouble with the Bailer flap lifting back up? Take the bailer off the boat, give it a good clean and check the two bands are still...

Laser Performance Covers: are made with Marchem Vista fabric, which is strong, durable, and resists water, mildew, UV and tears- arguably the highest quality marine fabric available. are sewn...

The Laser Pico Combo Bag.

Assembled ready to sail, rudder head, tiller, rudder blade and extension

Laser Bahia rudder head assembly.

Aluminum Pico tiller extension of length 880 mm complete with UJ and rubber non slip covering.

Laser Pico tiller with fork and polyflex strop.

A rudder ring is a must if you would like to keep your Rudder. It provides a secondary attachment of the rudder to the hull preventing detachment. Make sure you have a rudder ring fitted to save you...

Replacement straps for an aluminium or wood Sunfish tiller.

Long rudder pin to attach rudder head to gudgeons.

Laser Pico rudder strop complete with polyflex spring piece.

Laser Cockpit Drain 92184 - This Laser Drain Bush Set sits at the rear of the cockpit and creates the opening for the self-bailer control rod to operate through. When replacing this item, be sure to...

This Laser MKii Class Compliant Sail can be used for training while keeping your official (Legal) sails in top condition for official class racing events, and is made of the same cloth and...

This Laser Radial Class Compliant Sail can be used for training while keeping your official (Legal) sails in top condition for official class racing events, and is made of the same cloth...

This Laser 4.7 Class Compliant Sail can be used for training while keeping your official (Legal) sails in top condition for official class racing events, and is made of the same cloth and to the same...

12" IRL Sail Letters are designed for racing dinghies more than 3.5m long. This item only includes the individual letters: order 1 x I, 1 x R and 1 x L for a full sail markings set.Boats racing under...

Please contact our stores for availibility and delivery. The Laser Dart 16 Sailing Dinghy handles extremely well thanks to its pronounced chine, skegs and well-designed lifting rudders. In addition,...

Replacement Laser 42 Rudder Blade without stock or tiller and made from GRP.

Replacement centreboard / daggerboard foil for Laser 42 sailing dinghy. Made from GRP- Designed especially for the Laser 42.

The Bug Yellow Zest Race Mainsail is a popular upgrade from the standard Bug Mainsail and when bought alongside the unique Bug Powercurve Race Mast converts the Bug into the ideal learn to race boat...

The Laser Vago Mast 89007 is fully rigged mast complete with all fittings, halyards, standing rigging wires and spreaders.

Replacement Mast for the Laser Vago sailing dinghy without rigging included.

The Laser Vago Standard 7.56 m² rolled main sail with white panels and reefing points made from Dacron including long sail bag. Specifications Material: Dacron Panel colour: White...

The replacement Laser Vago Boom fully rigged 

The Laser Vago Jib 2.78 m² rolled with white panels made from Dacron including long sail bag. Specifications Material: Dacron Colour: White Size: 2.78 m²

The Laser Vago Race Gennaker 12.07 m² rip stop nylon gennaker standard color is orange including sail bag. Specifications Material: Nylon Colour: Orange Size: 12.07 m²