Sailboat Hardware

The 433 Dinghy Clew Hook is  designed for lasers and other loose-footed dinghies. Installs permanently on the boom and allows you to instantly attach and adjust your sail in high wind and waves. Weight: 0.65 oz. (18.4 g) Technical...

The 494 and 495 Fast Release Fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t recleat without centering the line. Specifications Fastener...

Features Efficient and light FRX Wichard thimbles are efficient, light and reliable. Very strong, they can be used for heavy loads and semi-static lines. FRX thimbles are designed to make your lines run smoothly with minimum wear. They are hard anodized...

The Barton Mini Camcleat suits ropes from 8mm - 10mm. Made from high strength materials. Manufactured from a composite Kevlar/Zytal material to accept lines up to 10mm. This advanced material offers performance advantages over carbon fibre and...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Micro block sheaves run exclusively on ball bearing systems for fast trim and release under...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Barton low friction eyes are manufactured in marine grade aluminium and finished in a unique hard ‘Spectro’ grey anodising. These lightweight high load rings are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast...

Cleat designed to hold dinghy rpes of 10-14mm.Of the same design as the Barton 'K' Cam range, this budget range features camcleats moulded from light grey glass-reinforced nylon.

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t recleat without centering the line. Specifications Maximum...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load...

The 494 and 495 Fast Release Fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker...

Features Efficient and light FRX Wichard thimbles are efficient, light and reliable. Very strong, they can be used for heavy loads and semi-static lines. FRX thimbles are designed to make your lines run smoothly with minimum wear. They are hard anodized...

The Barton Midi Camcleat suits ropes from 6mm - 12mm. Made from high strength materials for use on sailing dinghies such as the Topaz. Manufactured from a composite Kevlar/Zytal material to accept lines up to 12mm. This advanced material offers...

Low-friction micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications Sheave diameter: 7/8" (22 mm) Maximum line diameter: 1/4" (6 mm) Fasteners: 4...

The 16 mm is Harken's smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. Matches...

Lewmar 40mm Control Single Cheek Block is Ideal for use with hand-held loads, Lewmar’s Control Blocks feature lightweight, performance load-bearing capacity. MRT (Metal Replacement Technology) and a stainless steel central race and balls provide a...

Low-friction Bullet Blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Wire Bullet blocks use roller...