Sailboat Hardware

Replacement handle for XAS Clutch

Lewmar Size 1 Ocean Control Line Sheaves & Bearings, pack of 6.

Clamcleat® CL253AN preferred choice for adjusting dinghy trapeze lines. Also used for vangs & kicking straps; outhauls and small dinghy forestays. Each Clamcleat® CL253 is supplied with a black "link" (PTLINK). This...

Made of durable, flexible PVC, stand-up boots holdblocks up without snagging lines.The 369 fits 40 mm and 57 mm Carbo and Black Magic blocks. Specifications Height (A): 2" (51 mm) Width (B): 1 9/16" (40 mm) Weight: 0.45 oz. (12.7 g)

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/16" (27 mm) Length: 2...

Clamcleat® CL253/R preferred choice for adjusting dinghy trapeze lines. Also used for vangs & kicking straps; outhauls and small dinghy forestays. Each Clamcleat® CL253 is supplied with a black "link" (PTLINK). This makes...

Made of durable, flexible PVC, stand-up boots hold blocks up without snagging lines. The 370 fits 75 mm Carbo blocks. Specifications Height: 2 5/8" (67 mm) Width: 2 3/16" (55 mm) Weight: 1.1 oz. (30.8 g)

Specifications Material: Torlon Diameter: 3/16" (5 mm) Quantity: 20

Typically used to replace the ball bearings in 32mm car tracks. These Harken Ball Bearings for 25mm Car Tracks will suit any brand such as Barton, Harken or more.Made from Torlon for extra high loads. Specifications Material: Torlon Diameter: 1/4" (5...

Replacement Side Fairings for older Spinlock XA clutches.

The 438 adapter plate is perfect for use on masts and booms. It raises the cleat off the mast to improve the cleating angle and control. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 9/16" (14 mm) Length: 3" (76 mm) Width: 1...

Aluminium deck cleat is designed to hold 12mm to 16mm rope under high pressure. Specification Material: Aluminium Rope diameter: 1/2 - 5/8" (12 mm - 16 mm) Hole diameter: 3 3/4" (95 mm) Length: 4 5/8" (118 mm) Width: 1 1/2" (37 mm) Height: 1 3/4"...

Cleat designed to hold dinghy rpes of 5-10mm.Of the same design as the Barton 'K' Cam range, this budget range features camcleats moulded from light grey glass-reinforced nylon.

Low-friction Carbo Air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. The...

The 463 U-Adaptor adapts 75 mm Carbo singles to swivel bases. Specifications Shackle pin diameter: 3/16" (5 mm), 1/4" (6 mm) Weight: 0.58 oz. (16.3 g) A: 9/16" (14 mm) B: 13/32" (10 mm) Maximum working load: 1250 lb (567 kg) Breaking...

Standard replacement cam - for XAS.Will fit original XA clutches.

Replacement base for XTS, XCS XT, XC & XR clutches.

The Harken Cam-Matic Cleat Rebuild Kit includes: cam caps, washers, Delrin balls, torsion springs, baseplate, cam base. Cam cleats built before 1993 have different baseplates. Replace only balls, torsion springs and washers. Delrin is a...