Sailboat Hardware

Aluminum Clamcleat CL211 MK2 cleat for Optimist downhaul and halyard on silver mast. Specifications Material: Aluminium Colour: Silver

Optiparts Very strong alloy cleat in silver coated finish. Used as Laser outhaul and traveler cleat.

The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat with a fairlead to guide the rope into the teeth. The specially shaped base means the CL211 Mk1  means it can be fitted to either curved or flat surfaces The CL211 Mk1 has...

Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 2 1/16" (52 mm) Fits cam: 280 Length: 3 3/8" (85 mm) Width: 1 1/2" (38...

Lightweight, fiber-reinforced flairleads feature stainless wearguards for long life and are available in various colors for color-coding your cams. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height above cam: 5/8" (16 mm) Length:...

Optimist clamcleat with becket for Optimist halyard on Blackgold mast.

Hard anodized aluminium clamcleat for downhaul on the Optimist Blackgold mast. Specifications Material: Hard anodized aluminium Colour: Blackgold

Very strong alloy cleat in hard anodised finish for Laser outhaul and traveler.

The Clamcleat® CL211 Mk1 Racing Junior is a very strong allow cleat with a fairlead to guide the rope into the teeth. The specially shaped base means the CL211 Mk1  means it can be fitted to either curved or flat surfaces The CL211 Mk1AN...

Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 15/16" (23 mm) Length: 1 7/8" (48 mm) Width: 15/16" (24 mm) Weight: 0.29 oz. (8 g) Technical...

Clamcleat Side Entry CleatThe Clamcleat Cleat with Fairlead allows ropes to be hooked in for cleating, yet easily removed - hard anodised for wear resistance.- Rope size: 3-6mm- Mounting hole centres: 66mm- Length: 82mm- Width: 18mm- Weight

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 3/4" (19 mm) Length: 1 7/8"...

Specifications Material: Delrin Diameter: 5/16" (8 mm) Quantity: 25 Weight: 2 oz. (56.7 g)

When end controls are not used, add endstops to absorb shock loads. Specifications Fasteners: 5 mm (#10 FH inch) Use with track/rail: 2720 Technical File Installation Sheet

Clamcleat's CL230 Trapeze and Roller holds ropes firmly yet is devoid of any moving parts to break or seize. They are unaffected by the heat generated by a rope surging back through a cleat as well as being suitable for sub-zero temperatures. The...

Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included. Specifications Maximum working load: 250 lb (113 kg) Breaking load: 750 lb (339 kg) Use with track/rail: 2707 Height above track:...

The 093 U-adaptor allows blocks with 3/8" (10 mm) posts to be attached to swivel bases or to other blocks with 3/8" (10 mm) posts. Specifications Shackle pin diameter: 3/16" (5 mm) Weight: 0.48 oz. (13.6 g) A: 1/2" (12 mm) B: 7/16" (11 mm) Maximum...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1" (24 mm) Length: 2 9/16"...

Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/4" (32 mm) Length: 2 9/16" (65 mm) Width: 1 1/4" (32 mm) Weight: 0.5 oz. (14 g)

The lightweight alternative to a block, with no moving parts these are an extremely low maintainance item. Unlike some other manufacturers our rings are hard anodized with PTFE coating to provide the smoothest wear resistant surface possible. ...