null
Ireland EU online store

Cam Cleats & Accessories

Cam Cleats & Accessories

Harken, Spinlock & Barton Cam Cleats or Jam Cleats, as they are sometimes known, for all manner of rope control. Choose between basic economy Jam Cleats to high performance Cleats with lead eyes and high load release. Cam cleats on this page include models swivel base  and cams for main sheet control.

  • Harken Cam-Matic Cleat -Micro ( Small) 468

    Harken Cam-Matic Cleat -Micro ( Small) 468

    Harken

    TDD367.53
    Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 3/32" (2...
    HK468
    TDD367.53
  • Harken Aluminum Wide Standard Double Cam-Matic Cleat 412 Harken Aluminum Wide Standard Double Cam-Matic Cleat 412 - Top View

    Harken Aluminum Wide Standard Double Cam-Matic Cleat 412

    Harken

    TDD1,206.33
    Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 5/16" (8...
    HK412
    TDD1,206.33
  • Harken Double Cam Base with Swivel/412 Cam-Matic 403

    Harken Double Cam Base with Swivel/412 Cam-Matic 403

    Harken

    TDD2,214.36
    Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. Delrin is a registered trademark of E. I. du Pont de...
    HK403
    TDD2,214.36
  • Harken Micro Cam-Matic II Kit with Wire Fairlead 469

    Harken Micro Cam-Matic II Kit with Wire Fairlead 469

    Harken

    TDD499.97
    Wire fairleads maintain a low profile while holding the line close to the cleat. Kit Includes 468 Cam-Matic 475 wire fairlead Specifications Maximum working load: 200 lb (91 kg) Weight: 1.2 oz. (33 g)
    HK469
    TDD499.97
  • Harken Micro Carbo Cam-Cleat 471

    Harken Micro Carbo Cam-Cleat 471

    Harken

    TDD323.38
    Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced carbo-cams for racing where weight is critical, or where adjustments are less frequent. Specifications Minimum line...
    HK471
    TDD323.38
  • Harken Micro Carbo Cam II Kit with X-Treme Angle Fairlead 474

    Harken Micro Carbo Cam II Kit with X-Treme Angle Fairlead 474

    Harken

    TDD522.04
    The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. Kit Includes Fiber-reinforced 471 Carbo Cam 476 Extreme Angle fairlead Specifications Maximum working load: 150 lb (68 kg) Weight: 1.7 oz. (47 g)
    HK474
    TDD522.04
  • Harken Small Swivel Base with Trigger Cleat 361

    Harken Small Swivel Base with Trigger Cleat 361

    Harken

    TDD2,796.37
    Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. Delrin is a registered trademark of E. I. du Pont de...
    HK361
    TDD2,796.37
  • Harken Trigger Cam Cleat Adaptor Plate 355

    Harken Trigger Cam Cleat Adaptor Plate 355

    Harken

    TDD934.09
    The cam mounting bracket attaches the trigger cleat to 76 mm (3") low-profile triples. It fits the 152 and 411. Specifications Fastener spacing: 2 5/8" (66 mm) Fasteners: #10 TH inch (5 TH mm) Fits cam: 418 Height: 1/4" (6 mm) Length: 3 9/64" (79 mm)...
    HK355
    TDD934.09
  • Harken Cam-Matic Cleat -Offshore ( Large) 280 Harken Cam-Matic Cleat -Offshore ( Large) 280 - Top View

    Harken Cam-Matic Cleat -Offshore ( Large) 280

    Harken

    TDD728.06
    Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 1/4" (6...
    HK280
    TDD728.06
  • Harken Standard Wire Fairlead 298

    Harken Standard Wire Fairlead 298

    Harken

    TDD117.36
    Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/4" (32 mm) Length: 2 9/16" (65 mm) Width: 1 1/4" (32 mm) Weight: 0.5 oz. (14 g)
    HK298
    TDD117.36
  • Harken Micro Wedge Kit 297 Harken Micro Wedge Kit 297 - Top View

    Harken Micro Wedge Kit 297

    Harken

    TDD58.50
    Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 27 mm Fits cam: 468, 471 Length: 48 mm Width: 24 mm Weight: 5 g
    HK297
    TDD58.50
  • Harken Standard 15 Degree Angled Riser 296 Harken Standard 15 Degree Angled Riser 296 - Top View

    Harken Standard 15 Degree Angled Riser 296

    Harken

    TDD146.79
    Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/16" (27 mm) Length: 2...
    HK296
    TDD146.79
  • Harken Standard Flat Riser 295

    Harken Standard Flat Riser 295

    Harken

    TDD110.00
    Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1" (24 mm) Length: 2 9/16"...
    HK295
    TDD110.00
  • Harken Micro 15 Degree Angled Cam Riser 294 Harken Micro 15 Degree Angled Cam Riser 294 - Top View

    Harken Micro 15 Degree Angled Cam Riser 294

    Harken

    TDD95.28
    Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 3/4" (19 mm) Length: 1 7/8"...
    HK294
    TDD95.28
  • Harken Micro Flat Cam Riser 293 Harken Micro Flat Cam Riser 293 - Top View

    Harken Micro Flat Cam Riser 293

    Harken

    TDD58.50
    Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 5/8" (16 mm) Length: 1 7/8"...
    HK293
    TDD58.50
  • Harken Offshore Wedge Kit 283

    Harken Offshore Wedge Kit 283

    Harken

    TDD80.57
    Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 2 1/16" (52 mm) Fits cam: 280 Length: 3 3/8" (85 mm) Width: 1 1/2" (38...
    HK283
    TDD80.57
  • Harken Eye Strap for Micro Cam Pair 281

    Harken Eye Strap for Micro Cam Pair 281

    Harken

    TDD51.14
    Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height above cam: 1/2" (12 mm) Length: 1 7/16" (36 mm) Width: 7/16" (11 mm) Weight: 0.16 oz. (4.5 g)
    HK281
    TDD51.14