Direct replacement for the Laser Bug and Pico Daggerboard, constructed from aluminium. Official Foil from Laser Sailboats. Comes with end plugs and a bottom. In recent years, the Laser Pico and Laser Bug daggerboards have been made tougher so they will...

High quality HOLT padded centre toestrap to suit RS Pico and Laser Pico. Replaces Laser Performance part no 83112 This is the longer of the Laser Pico padded hiking straps which is fitted to the middle of the boat for the helm. The holes at each end of...

Genuine RS Laser Pico Toe Straps with padding both sides. Fitted in three positions on an RS Laser Pico: Two either side of the main hiking strap and the third in the crew forward position. Sold singularly Mounting screws sold separately M5 X 2 mm pan...

The official Laser Daggerboard Plate replacement fits Laser Pico's only. Made from black plastic, positioned above the shim, and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold separately. Specifications Material:...

The RS Pico Slot Strip for the underside of the daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into the cockpit. It keeps the daggerboard casing closed so...

Laser Performance Pico Race Sail Batten Set.

RS Pico / Laser Pico  5.14 m² new design main sail blue and white panels made from Dacron Specifications Colour: Blue/White With a Sail Bag Weight: 2.1 kg Dimension: 80 × 27 × 10 cm

RS Pico 1.09 m² rolled job in blue and white made from Dacron, including sail bag. Specifications Colour: Blue Weight: 1.5 kg Dimensions: 60 × 20 × 20 cm

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

The Mast Sleeve to suit the Laser Pico is fitted using 3/16" x 5/8" rivets (not included). The Pico Lower Mast Collar attaches to the mast and holds the boom in place. A rivet is used to hold the Pico Lower Mast Collar in Place...

Mast step plate, black plastic, with a large hole to take the mast foot, and 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

The Laser Pico Gooseneck is the plastic  U-shaped fitting that attaches the mast to the boom while allowing it to swing freely. Comes with a U-shaped clamp and boom insert.  The Pico Gooseneck attaches the boom to the mast via a simple clipping...

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

RS Pico webbing loop to fit Pico Boom with stainless rivet.  

Replacement Pico Boom with cleat, outhaul, and boom block. Official Pico parts are constructed from aluminium. Specification Material: Aluminium

OEM supplied for the following Dinghies and Users Laser Pico Clamcleat for boom outhaul   The Clamcleat side entry CL218 fairlead allows ropes to be hooked in for cleating, yet easily removed. Ideal as a reaching hook. This cleat is ideal for...

The Laser Pico Vang Plate for the boom has two attachment holes (3/16" x 1/2" rivets sold separately) and a flat base.  For a full Laser Pico Vang kit, see code: LS-90507. Pico kicker vang boom plate. Specification Material: Stainless steel

Eye Plate to attach the vang system to the mast on the Laser Pico. The Vang Mast Plate features three attachment holes (3/16" x 1/2" rivets sold separately) and a curved base designed to fit the Pico Mast. Specification Material: Stainless steel

Laser Road Base Trailer for galvanized stacking style, launching trollies - Suits ILCA, Laser & Laser Pico sailboats. Includes the lightboard, cable, and plug fitting and  complies with European Specification 793 Features Suits ILCA, Laser, and...

Fully detachable hiking bench for the Laser/ILCA, with adjustable hiking strap. 2 padded supports. Perfect for that extra training session. Convenient, portable, and quick to assemble due to the quick-link detachable joint design. This product is...

Sowester ILCA Laser Stacking Launching Trolley. Manufactured in high-grade stainless steel, making them lightweight and easy to handle, and entirely clean and corrosion-resistant. The trolley is designed to fit and lock into the standard ILCA Laser road...

This is one of the most popular launching trollies for Laser or ILCA Class Sailing Dinghies - Manufactured in galvanized steel, this trolley is robust and able to take a battering from multiple launches. It is designed to quickly and securely connect to...

The 10" Road wheel for the Dart 16 road base. A must if you are doing a lot of towing. Specification Diameter: 10"

The 8" road wheel fits the Laser, Pico, Vago, Bahia and Funboat road bases. A must if you are doing a lot of towing. Specification Diameter: 8"

ILCA 7 Mk11 Batten Set, approved by ILCA for all class events. ILCA 7 Batten set complete with all 3 battens and end caps. This set is suitable for the MK2 sails.

Laser batten tips that will replace the old style tips. This pack will able you to replace the ends of all 3 battens.

ILCA approved batten set to suit ILCA 4 & ILCA 6 Sails - Set of 3 - Also suits Laser 4.7 and Laser Radial. Complete batten set for ILCA 4 and ILCA 6 sails. Includes three battens with end caps. Compatible with existing Laser 4.7, Laser Radial, and...

Irish national flag for use with ILCA Laser Sails requiring sail identification. Specification Size: 567 mm x 337 mm Rules If required by the Notice of Race and the Sailing Instructions, a national flag with a nominal size of 567 x 337 mm shall be...

The Laser Red Rhombus is for the identification of ladies when racing in mixed fleets. Sails used in the women’s events shall carry a red rhombus above the top batten pocket on both sides. Features World or regional (continental)...

ILCA Laser Black Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. Approved for ILCA 6 & ILCA 7 & Laser Radial and Full Rig. Features Class legal sail numbers for ILCA 6 & ILCA 7 and...

The Laser Red Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. The 12" versions are popular for Laser 4.7,  Laser Pico and Funboat. We can attached these numbers to the sail for you...

The Laser Black Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7, Laser Pico and Funboat. We can attached these numbers to the sail for you however there...

The Laser Red Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7,  Laser Pico and Funboat. We can attached these numbers to the sail for you however...

ILCA 7 approved Laser Main Sail - Class compliant for all ILCA events. This sail also suits the Laser Performance L1 standard rig. Specification Mk2 (Standard Rig) cut sail Optional Extras Sail Numbers - Uses 4 x 12" Red Sail Numbers - 8 x 12"...

ILCA 6 approved Laser sail by Pryde - Class compliant for all ILCA events. This sail will also suit the Laser Radial rig. ILCA 6 Sail Numbering Guide Download the ILCA 6 Sail Numbering Guide here .input-wrapper a { text-decoration: none; /...

ILCA 6 approved Laser sail by Hyde - Class compliant for all ILCA events. This sail will also suit the Laser Radial rig. Class legal racing sail for the ILCA 6. Made from a heavy weight 3.8 oz Dacron for long sailing life and comes folded. Includes sail...

ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This gooseneck also suits Laser Performance models in Standard, Radial, and 4.7 rigs Specifications Material: Stainless steel Fasteners 6 x M4.8 x 12mm Stainless Steel Rivets -...

Stainless steel kicking strap plate for Standard, Radial, and 4.7 lower mast attached with rivets. Not inlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

ILCA Laser Boom Plug - Inboard end to fit boom to lower mast via gooseneck fitting. Use a 12mm x  Specification Material: Plastic