PUMPS & PLUMBING

The Rule 800 submersible bilge pump is ideal for small to medium craft , this new design has a vented body which helps protect against air locks and the thread port with check valve can stop back flow while also making it easy to install or remove for...

The 32mm (1 1/4") grey re-inforced Suction Hose comes with a plastic spiral strip (see picture below) which suppports the hose internally and prevents it from collapsing or bending past 9 degrees. This makes it the best option when considering bilge pumps

Non-kink, non-collapsable, ribbed suction hose for use with general water pumps.The 38mm Alfaflex Amazone SE Flexible Non-Kink Hose comes with a plastic spiral strip (see picture below) which suppports the hose internally and prevents it from collapsing...

Halyard Stainless Steel Hose Clamp Size Guide   Hose Diameter (mm)  Hose Clamp Size...

Jabsco Diverter 'Y' Valve for 38 mm. The Jabsco Y-Valve is designed to provide flexibility of onboard waste management by diverting waste either into an onboard holding tank or directly overboard. The Y- Valve may also be used in a bilge pumping system...

Allows valve to be mounted behind a bulkhead with the handle on the outside. Jabsco Handle Extension Spacer for 45490-1000 'Y' Valve Features Waste and corrosion-resistant construction throughout Rotating ports allow for variable routing of hoses...

Robust Y-Valve for use in toilet applications. Allows waste to be pumped overboard or into a holding tank. Features Waste and corrosion-resistant construction throughout Rotating ports allow for variable routing of hoses onto the valve Can be...

Robust Y-Valve for use in toilet applications. Allows waste to be pumped overboard or into a holding tank. Features Waste and corrosion-resistant construction throughout Rotating ports allow for variable routing of hoses onto the valve Can be...

Robust Y-Valve for use in toilet applications. Allows waste to be pumped overboard or into a holding tank. Specifications Weight: 0.2 kg

Jabsco Electro Magnetic 1 1/2" Clutch Pumps 12 V Pulley Double 'A' - Flanged Ports 2-size, foot-mounted with flanged ports 12 V DC electric clutch with 2A pulley. Features Heavy duty bilge and deck wash pump BSP threaded port adapters...

Jabsco 1" bronze pump, 80-size, foot mounted with BSP threaded ports 12 V DC electric clutch with 2A pulley. (See related products for replacement impeller). The Jabsco Jabsco 1" Magnetic Clutch Pumps can output 82 LPM and is suitable as a heavy duty...

Jabsco 1" bronze pump, 80-size, foot mounted with BSP threaded ports 24 V DC electric clutch with 2A pulley. (See related products for replacement impeller). The Jabsco Jabsco 1" Magnetic Clutch Pumps can output 82 LPM and is suitable as a heavy duty...

Jabsco 1" bronze pump, 80-size, foot mounted with BSP threaded ports 12 V DC electric clutch with 1B pulley. (See related products for replacement impeller). The Jabsco Jabsco 1" Magnetic Clutch Pumps can output 82 LPM and is suitable as a heavy duty...

Jabsco 1" bronze pump, 80-size, foot mounted with BSP threaded ports 12 V DC electric clutch with 1B pulley. (See related products for replacement impeller). The Jabsco Jabsco 1" Magnetic Clutch Pumps can output 82 LPM and is suitable as a heavy duty...

Neoprene Standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties. Specifications Impeller material: Neoprene Insert material: Bronze Number of blades: 8 Diameter: 2 9/16"...

Neoprene Standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties Specifications Impeller material: Neoprene Insert material: Brass Drive type: Flat Drive size: 2 Number of...

Features Regular household size seat Uses less than 1 A/hours per day Can use salt or fresh water to flush White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after...

Features Regular household size seat Uses less than 1 A/hours per day Can use salt or fresh water to flush White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after...

Features Regular household size seat Uses less than 1 A/hours per day White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after use Quiet-flush cycle - like a...

Features Regular household size seat Uses less than 1 A/hours per day White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after use Quiet-flush cycle - like a...

Nitrile Use for diesel transfer Specifications Impeller material: Nitrile Insert material: Plastic Drive type: Double flat Number of blades: 12 Diameter: 2 1/4" (57 mm) Width: 1 1/4" (31.5 mm) Shaft diameter: 5/8" (16 mm) Weight: 0...

Nitrile Use for diesel transfer Specifications Impeller material: Nitrile Drive type: Double flat Number of blades: 8 Diameter: 2 9/16" (65 mm) Width: 2" (51 mm) Shaft diameter: 5/8" (16 mm) Weight: 0.10 kg

Sanitary EPDM Used for elevated temperature hygienic applications to 185 degree F (85 degree C). EPDM is compatible with some ketone solvents. Specifications Impeller material: Sanitary EPDM Insert material: Plastic epoxy Number of blades:...

Neoprene Standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties. Specifications Impeller material: Neoprene Insert material: Brass Drive type: Single Flat Drive size: 4 Number...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Insert material: Brass Temperature range:...

Features Regular household size seat Uses less than 1 A/hours per day Can use salt or fresh water to flush White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after...

Features Regular household size seat Uses less than 1 A/hours per day Can use salt or fresh water to flush White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after...

Features Regular household size seat Uses less than 1 A/hours per day White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after use Quiet-flush cycle - like a...

Features Regular household size seat Uses less than 1 A/hours per day White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after use Quiet-flush cycle - like a...

Features Regular household size seat Uses less than 1 A/hours per day Can use salt or fresh water to flush White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after...

Features Regular household size seat Uses less than 1 A/hours per day Can use salt or fresh water to flush White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after...

Features Regular household size seat Uses less than 1 A/hours per day White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after use Quiet-flush cycle - like a...

Features Regular household size seat Uses less than 1 A/hours per day White vitreous china bowl Elegant bowl styling conceals all plumbing and wiring Owner selectable choice of leaving bowl wet or dry after use Quiet-flush cycle - like a...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Bronze Drive type: Ding drive keyway Number of blades: 6 Diameter: 2" (51 mm) Width: 7/8" (22.2 mm) Shaft diameter: 1/4" (12.7 mm) Note: BR...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Insert material: Brass Drive type:...

Neoprene Standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties. Specifications Impeller material: Neoprene Insert material: Brass Drive type: Key Drive size: 3 Number of...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Spline Drive size: 7 Number of blades: 10 Diameter: 2 1/4" (57 mm) Width: 2" (51 mm) Shaft diameter: 5/8" (16 mm) Weight: 0...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Key Drive size: 3 Number of blades: 12 Diameter: 2 9/16" (65 mm) Width: 1 5/8" (41 mm) Shaft diameter: 5/8" (16...

Jabsco Electro Magnetic 2" Clutch Pumps available in 12 V with a double pulley. 2" bronze pump, 270-size, foot mounted with BSP threaded ports. The Jabsco Jabsco 2" Magnetic Clutch Pumps can output 300 litres per minute and is suitable as a heavy duty...

Electro Magnetic 2" Clutch Pumps 24 V - Single Pulley with Flanged Ports 27-size, foot mounted with 2" flanged ports 24 V DC electric clutch with 1B pulley. Features Bilge and deck wash pump Bronze body, stainless steel shaft Can handle moderate...

Jabsco Electro Magnetic 2'' Clutch Pumps available in 12 V with a single pulley. 2" bronze pump, 270-size, foot mounted with BSP threaded ports. The Jabsco Jabsco 2" Magnetic Clutch Pumps can output 300 litres per minute and is suitable as a heavy duty...

Neoprene Neoprene use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Flat Drive size: 4 Number of blades: 6 Diameter: 1 1/4" (32 mm) Width: 15/32" (12 mm) Shaft diameter: 5/16" (8...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. 3. VITON impellers are recommended when pumping hydrocarbons...

Where 37010 Series Electric Toilets are installed below the waterline, we recommend installing a loop on the inlet plumbing rising at least 8" (20 cm) above the highest (static or heeled) waterline level, and installing a vented loop fitting at the top...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 4.0 GPM (15 LPM) with pressures up to 70 psi (4.8 bar) and are...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 4.0 GPM (15 LPM) with pressures up to 70 psi (4.8 bar) and are...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 4.0 GPM (15 LPM) with pressures up to 70 psi (4.8 bar) and are...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 4.0 GPM (15 LPM) with pressures up to 70 psi (4.8 bar) and are...

Replacement Joker Valve for Jabsco Toilet Series 37010 Specifications Weight: 0.01 kg

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Drive type: Key Temperature range: 50...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 5.0 GPM (18.9 LPM) with pressures up to 70 psi (4.8 bar) and...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 5.0 GPM (18.9 LPM) with pressures up to 70 psi (4.8 bar) and...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 5.0 GPM (18.9 LPM) with pressures up to 70 psi (4.8 bar) and...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 5.0 GPM (18.9 LPM) with pressures up to 70 psi (4.8 bar) and...

Jabsco 1.5" 38 mm bronze pump, 200 size, foot-mounted with BSP threaded ports available in 12 V DC and double pulley. The Jabsco 1.5" Magnetic Clutch Pumps can output 195 litres per minute and is suitable as a heavy duty bilge and deck wash pump which...

Jabsco 1.5" 38 mm bronze pump, 200 size, foot-mounted with BSP threaded ports available in 24 V DC and double pulley. The Jabsco 1.5" Magnetic Clutch Pumps can output 195 litres per minute and is suitable as a heavy duty bilge and deck wash pump which...

Jabsco 1.5" 38 mm bronze pump, 200 size, foot-mounted with BSP threaded ports available in 12 V DC and single pulley. The Jabsco Jabsco 1.5" Magnetic Clutch Pumps can output 195 litres per minute and is suitable as a heavy duty bilge and deck wash pump...

Jabsco 1.5" 38 mm bronze pump, 200 size, foot-mounted with BSP threaded ports available in 24 V DC and single pulley. The Jabsco Jabsco 1.5" Magnetic Clutch Pumps can output 195 litres per minute and is suitable as a heavy duty bilge and deck wash pump...

Heavy-duty 220 V AC general utility pump for dockside pump-out duties. Features Built-in dry running protection for 30 minutes after initial prime Handles hard and soft solids without clogging Will handle hard or soft solids Corrosion resistant...

Heavy-duty 110 V AC general utility pump for dockside pump-out duties. Features Built-in dry running protection for 30 minutes after initial prime Handles hard and soft solids without clogging Will handle hard or soft solids Corrosion resistant...

Heavy-duty 220 V AC general utility pump for dockside pump-out duties. Features Built-in dry running protection for 30 minutes after initial prime Handles hard and soft solids without clogging Nitrile oil-resistant impeller fitted as standard Will...

Heavy-duty 220 V AC general utility pump for dockside pump-out duties. Features Built-in dry running protection for 30 minutes after initial prime Handles hard and soft solids without clogging Neoprene impeller version available Will handle hard...

Heavy-duty 220 V AC general utility pump for dockside pump-out duties. Features Built-in dry running protection for 30 minutes after initial prime Handles hard and soft solids without clogging Nitrile oil-resistant impeller fitted as standard Will...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Insert material: Brass Drive type: Ding...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 6.0 GPM (22.7 LPM) with pressures up to 70 psi (4.8 bar) and...

Robust five chamber, patented co-injected molded diaphragm and larger heavy-duty motor brushes significantly extend pump life by up to 50%. The HotShot Series Washdown Pumps are available in 6.0 GPM (22.7 LPM) with pressures up to 70 psi (4.8 bar) and...

The 6050 Series Pumps are the highest capacity self-priming portable utility pumps offered by Jabsco. Features Bronze pump head Convenient carrying handle Continuous duty motor with thermal overload protection Motor wired to operate with 115 V...

Viton Recommended when pumping hydrocarbons, solvents and severely corrosive chemicals. Specifications Impeller material: Viton Insert material: Plastic epoxy Drive type: Double flat Temperature range: 60 degree F (15.6 degree C) to 180...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Drive type: Flat Number of blades: 10 Diameter: 2 1/4" (57 mm) Width: 1 1/4" (32 mm) Shaft diameter: 5/8" (16 mm)

Sanitary EPDM Used for elevated temperature hygienic applications to 185 degree F (85 degree C). EPDM is compatible with some ketone solvents. Specifications Impeller material: Sanitary EPDM Insert material: Plastic epoxy Drive type: Double...

Nitrile Use for diesel transfer Specifications Impeller material: Nitrile Insert material: Brass Drive type: Spline Drive size: 7 Number of blades: 8 Diameter: 2 9/16" (65 mm) Width: 2" (51 mm) Shaft diameter: 5/8" (16...

Jabsco Amazon Thru-deck comes with a detachable handle and through deck kit -For mounting through deck or through bulkhead. Amazon pumps are designed specifically for use as bilge pumps and toilet waste disposal pumps. Do not use Amazon pumps to...

The Amazon range of pumps is primarily designed to evacuate standing bilge water. Actual performance varies according to the individual installation and the pumping rate of the user. The Amazon Universal and Warrior models are also suitable for...

Jabsco Amazon Warrior pump with 38mm hose outlet. The Jabsco Amazon Warrior bulkhead/deck mounted manual pump has a flow rate up to 135 LPM with ports to suit 38 mm ID hose. Made from robust alloy and featuring twin diaphragms the Jabsco Amazon Warrior...

Jabsco Base Valve Gasket 29043-0000 suits all models of Jabsco Twist n Lock Toilets. Specifications Weight: 0.09 kg

Jabsco Pump Guard Strainer for 19 mm hose suits all electric diaphragm pumps. Features 20 mesh stainless steel filter screen Transparent housing allows instant inspection Screw off top allows quick in-place cleaning and removal of debris Prevents...

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 19 mm hose before the pump inlet and is recommended for all manual pumps. Stop bilge debris from blocking...

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 25 mm hose before the pump inlet and is recommended for all manual pumps. Stop bilge debris from blocking...

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 38 mm hose before the pump inlet and is recommended for all manual pumps. Stop bilge debris from blocking...

Replacement Ceramic Bowl for Compact Toilet. Specifications Weight: 6 kg Use For 29090 & 29120 Series 29090-2 & 29120-2 Series 29090-3 & 29120-3 Series 37010 Series 37045 & 37245 Series

Jabsco offers boaters several washdown pumps at ideal flow and pressure for washdown. Washdown pumps are ideal for cleaning decks, cockpits and anchors on yachts of a range of sizes and can be connected to sea or fresh water. The Quick Release Connector...

Jabsco offers boaters several washdown pumps at ideal flow and pressure for washdown. Washdown pumps are ideal for cleaning decks, cockpits and anchors on yachts of a range of sizes and can be connected to sea or fresh water. The Quick Release Connector...

This sliding vane disel transfer pump pumps 35LPM 12 V suitable for pumping diesel designed for marine with integral switch and fuse fitted. ISO8836 marine (ignition protected). Features Light duty, 40 minute rated diesel fuel transfer...

This sliding vane disel transfer pump pumps 35LPM 24 V suitable for pumping diesel designed for marine with integral switch and fuse fitted. ISO8836 marine (ignition protected). Features Light duty, 40 minute rated diesel fuel transfer...

The Jabsco 50 litre Diesel Refuelling Pump in 12 V power supply with a switch and fuse included. Jabsco Sliding Vane Fuel Pumps are designed for refuelling medium sized diesel powered vehicles, plant , aircraft and boats with typical tank sizes of 200 -...

The Jabsco 50 litre Diesel Refuelling Pump in 24 V power supply with a switch and fuse included. Jabsco Sliding Vane Fuel Pumps are designed for refuelling medium sized diesel powered vehicles, plant , aircraft and boats with typical tank sizes of 200 -...

The Do-It-Yourself Oil Changer is simple to use, and offers quick and easy oil changes for the leisure boat owner. Features Fully assembled Tested for 1400 cycles Specifications Container volume: 13 L (14 quart) Dipstick hose: 8' (2.49 m) DC...

Jabsco Drill Pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" (6 mm to 10 mm) chuck can be operated. They provide easy, powered pumping almost anywhere a hand utility pump might be used...