ILCA Laser Outhaul/Downhaul

ILCA Clew Strap, the strap holds the clew tightly in place using Velcro and through clever design it is easy fitted and yet still slips nicely along the boom.

DB-Racing Vang Line Pack comes with 3 mm Dyneema® primary vang line for Laser® and ILCA® with a spliced loop on one side for easy attachmentand  4 mm DB-Racing secondary control line, consists of a Dyneema® core and Technora /...

Outhaul system for ILCA® 6 & 7 Laser Radial & Mk2 with a spliced 3 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Made with a large loop which fits around the end of the boom for quick release. Comes with a 4 mm DB-Racing...

Outhaul system for Laser® 4.7 and ILCA® 4 with a spliced 3 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Made with a large loop which fits around the end of the boom for quick release. Comes with a 4 mm DB-Racing secondary...

6:1 Downhaul system for ILCA 7 and Laser Full Rig with a spliced 5 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Comes with a 4 mm DB-Racing secondary control line, consists of a Dyneema® core and Technora / polyester cover for...

Optional Mast Loop & Pulley Complete your DB-Racing downhaul system with the OPEX2225 Spliced mast loop which is attached below the vang assembly as in the image below Composed of spliced mast loop with 29mm Harken-TI lite Block  

8:1 Downhaul system for ILCA 7 and Laser Full Rig comprising  spliced 4 mm Dyneema® primary line and two Harken blocks, the 29 mm T2 soft-attach block and the 18 mm Fly-Soft block. Comes with a 4 mm DB-Racing secondary control line, consists of...

Replacement ILCA Laser bottom plate fitting to suit Harken XD outhaul and downhaul deck cleat fitting. Includes line guides . Suits all ILCA and Laser sailboats fitted with the XD or High Performance Cleat system and retro fits Laser part no...

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and includes 2 x Laser XD Harken 16 mm Air...

The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat with a fairlead to guide the rope into the teeth. The specially shaped base means the CL211 Mk1  means it can be fitted to either curved or flat surfaces The CL211 Mk1 has...

The 433 Dinghy Clew Hook is  designed for lasers and other loose-footed dinghies. Installs permanently on the boom and allows you to instantly attach and adjust your sail in high wind and waves. Weight: 0.65 oz. (18.4 g) Technical...

The 16 mm is Harken's smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. Matches...

The ultimate clew tie down for ILCA and Laser Sail Boats, as well a RS FevasThe strap holds the clew tightly in place using velcro and through clever design it is easy fitted and yet still slips nicely along the boom.

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. The...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load...

The Laser Boom Fairlead in blue plastic to tie the clew hook to the boom. Also used for traveller or boom outhaul. Features Fitting requires rivets 3/16" x 3/4" (sold seperately) Also used for clew outhaul fairlead on laser...

Low-friction Carbo Air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter:...

The Laser Harken Power Pack is a complete kit and will upgrade your old Laser cunningham and outhaul. The Harken Power Pack is retrofitable to older hulls and uses existing screw holes. The Power Pack is supplied with FSE ropes, blocks, cleats, screws,...

Harken Race complete kit to upgrade old systems for cunningham and outhaul retrofitable to older hulls, uses existing screw holes, supplied with all ropes blocks cleats and screws and fitting instructions.

The Harken Outhaul Kit with Laser Clew Hook included are designed for Lasers of all types and other loose-footed dinghies. They install permanently on the boom and allow you to instantly attach and adjust your sail in high wind and waves. Full kit...

Harken 16 mm micro bearing airblock complete with Harken twisted metal clew hook, ideal for ILCA, Laser and many other Dinghies Specifications Sheave diameter: 16 mm Stainless Clew Hook Combination Use with Clew Strap

Harken 16mm micro bearing airblock double block with becket for use on the Laser 1. The Laser Double Block is part of Harken's 16mm Block (Harken's smallest) range for small sailing dinghies.This block suits the Laser Vang/Kicker Double Block but is...

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and requires 2 x Laser XD Harken 16 mm Air Block...

ILCA Harken XD Outhaul & Downhaul Deck Ceat with Harken Double Jammer. Suits all models ILCA & Laser - Official branded ILCA product. Fasteners 2x A4 Stainless 10 x 1 1/2" self tappers Use sealant in when installing.

Pre-Spliced Laser Primary line for the Cunningham or Laser Downhaul system which connects to the kicker at one end, rigged through the sail and connected to a becket block at the other end. Specification Diameter:3.5mm  Length: 70cm...

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material: Dyneema Colour: Black Pre-cut diameter: 4 mm Length: 1...

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material: Dyneema Colour: Blue Pre-cut diameter: 4 mm Length: 1.3...

This is a standard length Laser XD Secondary Line Downhaul made from Marlow Excel Control Line giving perfect control with low stretch and smooth tension and release movements. Features  Smooth cover giving low friction through the...

This ILCA Laser Outhaul / Vang secondary line is made from 4mm Marlow Excel Control rope and provides excellent strength, flexiiblity and strength. Ready to go and cut to the required length of 4.95 mts, Usage Use as Secondary Vang Line for all rigs in...

Laser Outhaul Control Line Pre-cut 4 mm x 4.8 m made from high quality Marlow Excel Control. Features Precision control and release Smooth cover giving low friction through the sheaves Firm construction allows precise grip in the jam cleat Durable...