Cam Cleats & Accessories
Harken, Spinlock & Barton Cam Cleats or Jam Cleats, as they are sometimes known, for all manner of rope control. Choose between basic economy Jam Cleats to high performance Cleats with lead eyes and high load release. Cam cleats on this page include models swivel base and cams for main sheet control.
-
€8.25
-
Harken Cam-Matic Cleat -Micro ( Small) 468
Harken
€47.95Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 3/32" (2...HK468€47.95 -
Harken Aluminum Wide Standard Double Cam-Matic Cleat 412
Harken
€159.95Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 5/16" (8...HK412€159.95 -
Harken Double Cam Base with Swivel/412 Cam-Matic 403
Harken
€292.95Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. Delrin is a registered trademark of E. I. du Pont de...HK403€292.95 -
Harken Standard Cam-Matic Kit with Fast Release Fairlead 496
Harken
€88.95Fast Release Fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker take-downs during...HK496€88.95 -
Harken Micro Cam-Matic II Kit with Wire Fairlead 469
Harken
€65.95Wire fairleads maintain a low profile while holding the line close to the cleat. Kit Includes 468 Cam-Matic 475 wire fairlead Specifications Maximum working load: 200 lb (91 kg) Weight: 1.2 oz. (33 g)HK469€65.95 -
Harken Micro Carbo Cam-Cleat 471
Harken
€41.95Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced carbo-cams for racing where weight is critical, or where adjustments are less frequent. Specifications Minimum line...HK471€41.95 -
Harken Micro Carbo Cam II Kit with X-Treme Angle Fairlead 474
Harken
€68.95The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. Kit Includes Fiber-reinforced 471 Carbo Cam 476 Extreme Angle fairlead Specifications Maximum working load: 150 lb (68 kg) Weight: 1.7 oz. (47 g)HK474€68.95 -
Harken Small Swivel Base with Trigger Cleat 361
Harken
€380.05Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. Delrin is a registered trademark of E. I. du Pont de...HK361€380.05 -
Harken Trigger Cam Cleat Adaptor Plate 355
Harken
€126.95The cam mounting bracket attaches the trigger cleat to 76 mm (3") low-profile triples. It fits the 152 and 411. Specifications Fastener spacing: 2 5/8" (66 mm) Fasteners: #10 TH inch (5 TH mm) Fits cam: 418 Height: 1/4" (6 mm) Length: 3 9/64" (79 mm)...HK355€126.95 -
Harken Cam-Matic Cleat -Offshore ( Large) 280
Harken
€96.95Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 1/4" (6...HK280€96.95 -
Harken Standard Wire Fairlead 298
Harken
€14.95Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/4" (32 mm) Length: 2 9/16" (65 mm) Width: 1 1/4" (32 mm) Weight: 0.5 oz. (14 g)HK298€14.95 -
Harken Micro Wedge Kit 297
Harken
€6.95Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 27 mm Fits cam: 468, 471 Length: 48 mm Width: 24 mm Weight: 5 gHK297€6.95 -
Harken Standard 15 Degree Angled Riser 296
Harken
€18.95Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/16" (27 mm) Length: 2...HK296€18.95 -
Harken Standard Flat Riser 295
Harken
€13.95Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1" (24 mm) Length: 2 9/16"...HK295€13.95 -
Harken Micro 15 Degree Angled Cam Riser 294
Harken
€11.95Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 3/4" (19 mm) Length: 1 7/8"...HK294€11.95 -
Harken Micro Flat Cam Riser 293
Harken
€7.95Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 5/8" (16 mm) Length: 1 7/8"...HK293€7.95 -
Harken Offshore Wedge Kit 283
Harken
€9.95Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 2 1/16" (52 mm) Fits cam: 280 Length: 3 3/8" (85 mm) Width: 1 1/2" (38...HK283€9.95 -
Harken Eye Strap for Micro Cam Pair 281
Harken
€6.95Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height above cam: 1/2" (12 mm) Length: 1 7/16" (36 mm) Width: 7/16" (11 mm) Weight: 0.16 oz. (4.5 g)HK281€6.95 -
Harken Bullseye Swivel Base Cam Cleat with Carbo-Cam 241
Harken
€113.95The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Specifications Minimum line diameter: 1/8" (3 mm) Maximum line diameter: 3/8" (10 mm) Fastener spacing: 1 1/32" (26 mm)...HK241€113.95 -
Harken Bullseye Swivel Base Cam Cleat with 150 Cam-Matic 240
Harken
€125.95The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Specifications Minimum line diameter: 1/8" (3 mm) Maximum line diameter: 1/2" (12 mm) Fastener spacing: 1 1/32" (26 mm)...HK240€125.95 -
Harken Little Ball Bearing Low-Profile Swivel Cam Base 205
Harken
€199.95Ball Bearing Swivel Bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The low profile 205 is used when installation is at...HK205€199.95 -
Harken Low-Profile Standard Eyestrap 201 - 38mm
Harken
€7.95Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Specifications Overall length (A): 1 7/8" (48 mm) Overall height (B): 3/8" (10 mm) Mounting hole spacing...HK201€7.95 -
Harken Cam-Matic Cleat Bastet Modified for Windward Sheeting Car 150SP
Harken
€76.20Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 1/8" (3...HK150SP€76.20 -
Harken Cam-Matic Cleat Rebuild Kit 150KIT - 1993 and Newer
Harken
€26.10The Harken Cam-Matic Cleat Rebuild Kit includes: cam caps, washers, Delrin balls, torsion springs, baseplate, cam base. Cam cleats built before 1993 have different baseplates. Replace only balls, torsion springs and washers. Delrin is a...HK150KIT€26.10 -
Harken Standard Cam-Matic Wedge Kit 145
Harken
€9.95Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Length: 2 9/16" (65 mm) Width: 1 1/4"...HK145€9.95 -
Spinlock PXR Cam Cleat 8mm - 10mm
Spinlock
€59.30Spinlock PXR Cam Cleat for 8mm to 10mm rope. The PXR racing camcleat features a three stage adjustment spring allowing users to select the release setting for the application and prevailing conditions.Lighter settings for continuously trimmed sheets,...SPINLOCKPXR0810€59.30 -
Spinlock PXR Cam Cleat for 8-10mm Rope - Retro Fit Version
Spinlock
€60.85Spinlock PXR Cam Cleat PXR0810-T - Compact roller action cam cleat for easy release and precision of high performance control lines 8-10mm. This is the Retro-fit version for upgrading main sheet swivel cleats and traveller...SPINLOCKPXR0810/T€60.85 -
Spinlock PXR Cam Cleat Swivel Base - 8mm - 10mm
Spinlock
€82.15Swivel base PXR Cam Cleat for 36 degree precision control of lines 8-10 mm.SPINLOCKPXR0810/SW€82.15 -
Spinlock PXR Cam Cleat for 2mm-6mm Lines - Vertical Pivot
Spinlock
€73.75Spinlock PXR Cam Cleat PXR0206/VP - Vertical Pivot version for 2-6mm lines - Provides a vertically fixed, pivoting sheave and cleat in an ultra compact design This will suit various mounting positions for centrally feeding control lines out to...SPINLOCKPXR0206/VP€73.75 -
Spinlock PXR Cam Cleat for 2-6mm Rope - Retro Fit Version
Spinlock
€45.65Spinlock PXR Cam Cleat PXR0206-T - Compact roller action cam cleat for easy release and precision of high performance control lines 2-6mm. This is the Retro-fit version for upgrading main sheet swivel cleats and traveller systems...SPINLOCKPXR0206/T€45.65 -
Spinlock PXR Cam Cleat - 2-6mm
Spinlock
€44.10The Spinlock PXR Cam Cleat for 2-6mm line. PXR - Designed for precision control of high performance lines.The PXR racing camcleat features a three stage adjustment spring allowing users to select the release setting for the application and prevailing...SPINLOCKPXR0206€44.10 -
Harken Standard Carbo Cam Cleat 365
Harken
€46.95Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams for racing where weight is critical, or where adjustments are less frequent. Specifications Height: 1 3/16" (30...HK365€46.95 -
Harken Stainless Steel Double Pin U-Adapter 463 - 5mm/6mm
Harken
€24.95The 463 U-Adaptor adapts 75 mm Carbo singles to swivel bases. Specifications Shackle pin diameter: 3/16" (5 mm), 1/4" (6 mm) Weight: 0.58 oz. (16.3 g) A: 9/16" (14 mm) B: 13/32" (10 mm) Maximum working load: 1250 lb (567 kg) Breaking...HK463€24.95 -
Harken Stainless Steel Detachable U-Adaptor Fitting for 3/8" Post 093 - 5mm
Harken
€30.95The 093 U-adaptor allows blocks with 3/8" (10 mm) posts to be attached to swivel bases or to other blocks with 3/8" (10 mm) posts. Specifications Shackle pin diameter: 3/16" (5 mm) Weight: 0.48 oz. (13.6 g) A: 1/2" (12 mm) B: 7/16" (11 mm) Maximum...HK093€30.95 -
Barton Pillar Fairlead for Midi Camcleat
Barton
€9.75Pillar fairleads enable the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Stainless steel pillars add strength and wear resistance.B70205€9.75 -
Barton Budget Camcleat Mini - 5-10mm
Barton
€23.75Cleat designed to hold dinghy rpes of 5-10mm.Of the same design as the Barton 'K' Cam range, this budget range features camcleats moulded from light grey glass-reinforced nylon.B70600€23.75 -
Barton Budget Camcleat Midi - 6-12mm
Barton
€26.85Cleat designed to hold dinghy rpes of 6-12mm.Of the same design as the Barton 'K' Cam range, this budget range features camcleats moulded from light grey glass-reinforced nylon.If you add Barton Fairlead you can use this cleat for the Topaz Deck (see...B70601€26.85 -
Barton Budget Camcleat Maxi - 10-14mm
Barton
€29.95Cleat designed to hold dinghy rpes of 10-14mm.Of the same design as the Barton 'K' Cam range, this budget range features camcleats moulded from light grey glass-reinforced nylon.B70602€29.95 -
Barton 'K' Camcleat Black -Maxi for 10-14mm
Barton
€39.05The Barton Maxi KCamcleat suits ropes from 10mm - 14mm Manufactured from a composite Kevlar/Zytal material to accept lines 10-14mm. This advanced material offers performance advantages over carbon fibre and conventional glass-reinforced resins;...B70300€39.05