Submersible Bilge Pumps

Rule Bilge Switches are simple, classic-looking on/off switches with enamel-coated stainless steel finish. These switches are simple enough to screw onto a boat dash and then be wired up directly to the battery. The switch itself uses crimped spade type...

The Rule Bilge Pump Rocker Switch 24v No 44 controls any automatic pump or pump equipped with an automatic float switch. This unit features a black plastic panel with 3 way postion: 'On, Manual and Auto'. It has a built-in fuse holder and an internally...

The Rule Bilge Pump Rocker Switch 12v No 43 controls any automatic pump or pump equipped with an automatic float switch. This unit features a black plastic panel with 3 way postion: 'On, Manual and Auto'. It has a built-in fuse holder and an internally...

The Rule 3-Way Lighted Panel Switch controls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a "fail safe" spring return to "off" from the "manual" position. Panel is black stainless steel...

Rule 3 way bilge pump panel switch with On, Off and Hold Down On positions, suitable for automatic bilge with 3 wire systems The "manual" position has a "fail-safe" spring return to "off" so you can't leave your pump running by accident. Black stainless...

Year after year, the Rule-A-Matic 35A has been the switch of choice for boaters the world over. Rule's latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine...

The Rule-A-Matic Plus float switch is a high capacity bilge pump switch, suitable for pumps drawing up to 20 amps. It comes with a protective cover and  debris guard Feature For automatic on/off bilge pump control Marine quality corrosion free...

The Rule-A-Matic Plus float switch is a high capacity bilge pump switch, suitable for pumps drawing up to 20 amps. It comes with a protective cover, debris guard and a fuse holder. Features For automatic on/off bilge pump control Marine quality...

The Rule SuperSwitch is designed for the toughest applications and features a larger float for increased buoyancy and a removable base for easy servicing and installation. This tried and tested Float Switch is capable of handling bilge pumps drawing...

The Rule Eco Float Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached...

The Rule Eco Float Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached...

The Rule LoPro LP900S is a totally versatile and innovative design and comes with an adjustable outlet and inlet, so that you can suck up water from a lower position in the bilge. Its compact shape allows it to fit the tight the spaces often found...

The Rule LoPro LP900D is a totally versatile and innovative design and comes with an adjustable outlet and inlet, so that you can suck up water from a lower position in the bilge. Its compact shape allows it to fit the tight the spaces often found...

The Rule 360 submersible bilge pump is ideal for small craft. This new design features a vented body, helping to protect against air locks and a thread port making it easy to install or remove for cleaning. The threaded port includes a check which...

Rule 25SA automatic sensor type submersible pump 12 volt DC supplied with 750mm cable. The Rule 25SA automatic bilge has a computerised operation and checks for water every 2 1/2 minutes and keep bilge water at the lowest level of any...

Rule 25SA-24 automatic sensor type submersible pump 24 volt DC supplied with 750mm cable. The Rule 25SA-24 automatic bilge has a computerised operation and checks for water every 2 1/2 minutes and keep bilge water at the lowest level of any...