Jabsco Impellers

This Jabsco Magnetic Clutch Pump Service Kit contains a neoprene impellor: J17935-0001, a J21849 seal kit, a gasket and a set of S/S end cover screws 6mm x 10mm hex head. Features Contains everything you need to service a 1.5" Jabsco magnetic clutch...

Features Replacement nitrile impeller and shaft Specifications Impeller material: Nitrile Drive size: 1 or 2 Number of blades: 6 Diameter: 1 9/16" (40 mm) Width: 3/4" (19 mm) Shaft diameter: 1/4" (6 mm) Suits Engines Yanmar 1GM10

Viton Recommended when pumping hydrocarbons, solvents and severely corrosive chemicals. Specifications Impeller material: Viton Insert material: Plastic epoxy Drive type: Double flat Temperature range: 60 degree F (15.6 degree C) to 180 degree F (82.2...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Insert material: Brass Drive type: Ding drive...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Drive type: Key Temperature range: 50 degree F...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. 3. VITON impellers are recommended when pumping hydrocarbons. Specifications Impeller...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Key Drive size: 3 Number of blades: 12 Diameter: 2 9/16" (65 mm) Width: 1 5/8" (41 mm) Shaft diameter: 5/8" (16 mm) Replaces Volvo #...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Insert material: Brass Drive type: Spline Drive...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Bronze Drive type: Ding drive keyway Number of blades: 6 Diameter: 2" (51 mm) Width: 7/8" (22.2 mm) Shaft diameter: 1/4" (12.7 mm) Note: BR Brass Extended...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Insert material: Brass Temperature range: 50...

Sanitary EPDM Used for elevated temperature hygienic applications to 185 degree F (85 degree C). EPDM is compatible with some ketone solvents. Specifications Impeller material: Sanitary EPDM Insert material: Plastic epoxy Number of blades: 12...

Neoprene Standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties Specifications Impeller material: Neoprene Insert material: Brass Drive type: Flat Drive size: 2 Number of blades: 6...