Switch Panels

Blue Sea Traditional 5 Position Metal DC Breaker Panel. Features All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All panels with analog meters are owner...

Features All circuit label positions are backlit “ON” indicating LEDs installed in all circuit positions Includes 4206—Square Format Label Set Specifications Positions: 4 Nominal Voltage: 230V AC Maximum Amperage: 100A  Height:...

Features Designed for flybridge and open cockpit applications Panel front is rated IP66—Protected against powerful water jets Ignition protected—safe for installation aboard gasoline powered boats ON-OFF Contura Switches ON indicating LEDs...

Consolidated control and circuit protection for up to four bilge pumps. Features Designed for 12 or 24V DC systems Watertight mounting gasket Pre-wired for easy installation ON indicating LEDs embedded in all switches (ON)-OFF-ON Contura Switches and...

Designed for exposed mounting applications Illuminated 15A circuit breakers provide switching, “ON” indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing...

Designed for exposed mounting applications Illuminated 15A circuit breakers provide switching, “ON” indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing...

Rocker Switch SPDT - (ON)-OFF-(ON) For use in Blue Sea 360 panels in the following modules: gauge, DC push button + switch, and DC battery management. Specifications Action: (ON)-OFF-(ON) Pole / Throw: SPDT  Maximum Amperage: 8A @ 125V AC, 10A @...

Blue Sea IP67 rated, push button ON-OFF switch with red LED illuminated ring. Features 10A continuous Single Pole Double Throw or Single Pole Single Throw Can be wired for normally open or normally closed Colour Red Installs with .110inch quick connects...

Replacement, clear coloured boots to fit all Blue Sea push-button-reset, circuit breakers, pack of two. Features Replaces standard mounting nut for mounting on Thermal Push Button Circuit Breakers only UV resistant material resists discoloration and...

The Rule Bilge Pump Rocker Switch 24v No 44 controls any automatic pump or pump equipped with an automatic float switch. This unit features a black plastic panel with 3 way postion: 'On, Manual and Auto'. It has a built-in fuse holder and an internally...

The Rule Bilge Pump Rocker Switch 12v No 43 controls any automatic pump or pump equipped with an automatic float switch. This unit features a black plastic panel with 3 way postion: 'On, Manual and Auto'. It has a built-in fuse holder and an internally...

The Rule 3-Way Lighted Panel Switch controls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a "fail safe" spring return to "off" from the "manual" position. Panel is black stainless steel...

Rule 3 way bilge pump panel switch with On, Off and Hold Down On positions, suitable for automatic bilge with 3 wire systems. The "manual" position has a "fail-safe" spring return to "off" so you can't leave your pump running by accident. Black stainless...

Water resistant on/off toggle switch for on demand use of Rule Personal Watercraft Pumps.

The Blue Sea 4378 WeatherDeck® 12V DC Waterproof Circuit Breaker Panel is ideal for flying bridges and exposed cockpit locations - The panel is IP67 waterproof protected and one of the best on the market for trouble free performance in exposed...

The Blue Sea 12v 4308 WeatherDeck® features 8 fused and illuminated switches in a robust and waterproof panel , ideal for flying bridge and exposed cockpit locations. Features Designed for flybridge and open cockpit applications IP67 - protected...

Blue Sea WeatherDeck® Switch Panels are waterproof and rated IP67 (for temporary immersion in water) and use materials that won't deteriorate in the harsh sun, salt, and water. Many small boats, which already have circuit protection and do not run at...

The Blue Sea 12v 4306 WeatherDeck® features 6 fused and illuminated switches in a robust and waterproof panel, ideal for flying bridge and exposed cockpit locations. Features Designed for flybridge and open cockpit applications IP67 - protected...

Blue Sea WeatherDeck® Switch Panels are waterproof and rated IP67 (for temporary immersion in water) and use materials that won't deteriorate in the harsh sun, salt, and water. Many small boats, which already have circuit protection and do not run at...

Blue Sea WeatherDeck® Switch Panels are waterproof and rated IP67 (for temporary immersion in water) and use materials that won't deteriorate in the harsh sun, salt, and water. Many small boats, which already have circuit protection and do not run at...

Bluesea, Model 4322, water resistant  6 circuit breaker, switch panel with illuminated display and grey trim - Designed for exposed mounting positions, this new range of circuit breaker panels from BlueSea is water resistant to IP66 and a very cost...

Bluesea Water Resistant Circuit Breaker 4 Switch control with illuminated display camo trim. Designed for exposed mounting applicationsFeatures Illuminated 15A circuit breakers provide switching, “ON” indication and overcurrent...

Rule Bilge Switches are simple, classic-looking on/off switches with enamel-coated stainless steel finish. These switches are simple enough to screw onto a boat dash and then be wired up directly to the battery. The switch itself uses crimped spade type...

Blue Sea WeatherDeck Toggle Switches, all models. Features Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck® Panels When mounted with a WeatherDeck® Toggle Switch Boot Rated IP67-temporary immersion for 30...

Features Rated IP67 - temporary immersion for 30 minutes UV resistant material resists discoloration and cracking Replaces dress nut for mounting on WeatherDeck panel switches Specifications Colour: Black Thread size: 15/32"- 32" Weight: 0.02 kg (0.04...

Features Designed for flybridge and open cockpit applications Rated IP67 - temporary immersion for 30 minutes Independent label backlighting allows switching and dimming Compatible with all blue sea systems digital dimmers Each panel can be mounted in...

Features Designed for flybridge and open cockpit applications Rated IP67 - temporary immersion for 30 minutes Independent label backlighting allows switching and dimming Compatible with all blue sea systems digital dimmers Each panel can be mounted in...

Blue Sea WeatherDeck® Switch Panels are waterproof and rated IP67 (for temporary immersion in water) and use materials that won't deteriorate in the harsh sun, salt, and water. Many small boats, which already have circuit protection and do not run at...

Features Designed for flybridge and open cockpit applications IP67 - protected against immersion up to 1 m for 30 minutes Independent label backlighting circuit for remote switching and dimming Integrated ATO/ATC fuse based circuit protection Each panel...

Features ON-OFF contura switches ON indicating LED's embedded in switch Watertight mounting gasket Countersunk mounting holes throughout Two-part polyurethane slate gray finish Completely wired and ready to install Will withstand the water exposures...

Features ON-OFF contura switches ON indicating LED's embedded in switch Watertight mounting gasket Countersunk mounting holes throughout Two-part polyurethane slate gray finish Completely wired and ready to install Will withstand the water exposures...

Features ON-OFF contura switches Watertight mounting gasket ON indicating LED's embedded in switch Designed for flybridge and open cockpit applications Push button reset-only circuit breakers with waterproof boots Panel front is rated IP66-protected...

Features ON-OFF contura switches Watertight mounting gasket ON indicating LED's embedded in switch Designed for flybridge and open cockpit applications Push button reset-only circuit breakers with waterproof boots Panel front is rated IP66-protected...

Features ON-OFF contura switches Watertight mounting gasket ON indicating LED's embedded in switch Designed for flybridge and open cockpit applications Push button reset-only circuit breakers with waterproof boots Panel front is rated IP66-protected...

Features ON-OFF contura switches Watertight mounting gasket ON indicating LED's embedded in switch Designed for flybridge and open cockpit applications Push button reset-only circuit breakers with waterproof boots Panel front is rated IP66-protected...

Features Watertight mounting gasket ON-OFF-AUTO contura switch Completely wired and ready to install Designed for flybridge and open cockpit applications Fuse holders accept commonly available AGC and MDL glass fuses "ON" LED embedded in switch...

Use this Roca Carling Blank Switch Cover to block up unused sockets in your switch panel. Fits the Roca panels (see related products).

As under Roca part no: 466060. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for windlass switches. These actuators do not work with Rule or Bluesea Switches. Only use with Roca.