ENGINE & ENGINEERING

Sierra 18-7968 premium quality fuel Filter, water separator for Mercury 35-18458Q4 Outboards 10 Micron Features Replaces Mercury 35-18458Q4 Filter kit includes BLUE sensor 10 Micron filter element with high pleat count , more pleats higher...

Genuine Racor OEM B32012 Fuel Filter Water Separator Assembly with 30 Micron element with clear bowl with self-venting drain Features Rugged re-usable see-through bowl with self venting drain  340 lph ( 60GPH ) Clear Bowl with...

The Racor 460R30 is part of the Racor 400 Spin-on Series of marine fuel filters and water separators. It features a 30 micron element, an integrated primer pump and clear see-through inspection bowl with drain  It is suitable for diesel inboard...

Racor 320R-RACE-01 Marine Fuel Filter Water Separator with 10 micron element and clear engineered plastic drain bowl for Petrol Inboard and Outboard requiring a flow rate of 340 lph/ 60gph.  Technical Specifications Racor 200 Spin-on...

Racor S3228TUL genuine replacement 10Micron Aquabloc® Spin-on Element for Racor Fuel Filter/ Water Separators 320R-RAC-01/02 &  490R-RAC-01 Series Never compromise the effectiveness of your Racor Fuel Filter / Water Separator. Always...

Racor 230R30 Diesel Spin-on 200 Series Filter and Water Separator with 30 micron element and clear viewing drain bowl  For Diesel engines up to a flow rate of 30 US gph / 114 lph All Spin-on Series Fuel Filter Water Separators utilize...

The Racor120AT marine fuel filter and water separator has a 10 micron filter and clear, see through inspection bowl. It is suitable for diesel inboard engines requiring a flow rate up to 5 gph / 57 lph Specification 10 micron Aquabloc® media is...

The Racor120R-RAC-1 marine fuel filter and water separator has a 10 micron filter and clear, see through inspection bowl. It is suitable for all petrol/gasoline driven inboard and outboard motors requiring a flow rate up to 114lph Racor gasoline fuel...

Wema HFL 163306 stainless flange kit complete with gasket, inner ring and set of stainless screws with 1 1/4" female thread to take Wema standard stainless senders Accepts Wema S3/S3H Sensors

High quality marine grade, cutlass bearings, precision manufactured for stern tubes, engine shafts and other water lubricated bearing applications. The MMP Aqualube series of bearings are constructed using extremely tough rubber bearings...

This Outboard Motor Bracket, with wooden pad clamps either side on the pushpit with a support stay for the bottom rail. Equipped with two holes to adapt the brackets onto pulpit pipe Ø 22-25-30 mm. Suitable for outboards up to 10hp Features ...

Racor spin-on PFF5510 fuel filter 10 micron for all inboard and outboard gasoline applications, The PFF5510 features the Aquabloc® 10 micron rated media and is guaranteed to outperform standard gasoline filters and exceeds all OEM...