Anodes - Hull

High quality Martyr Zinc Anode to suit most Yanmar Sail Drives Part No CM19642002652Z Suits Yanmar SD20, SD30, SD31, SD40 and the SD50 Saildrives  

MG Duff Brass Pencil Anode Plug used for installation of pencil anodes in various marine engines. Suitable only for P500 (10mm) anodes and be fitted into 3/8" NPT thread.Sold 1 per pack.MGDuff part no: PP375BI.D thread: 10mm

MG Duff Brass Pencil Anode Plug used for installation of pencil anodes in various marine engines. Suitable only for P375 (8mm) anodes and be fitted into 1/4" (0.25") NPT thread.Sold 1 per pack.MGDuff part no: PP250BI.D thread: 8mm

For general use and specifically for internal engine and cooler protection. Sold 1 per pack.

For general use and specifically for internal engine and cooler protection. Sold 1 per pack.

The MGDUFF button anode (or disc anode) is a popular zinc anode for use all around your boat from the hull to the trim tabs. Button Anode as seen under MGDUFF ZD56. Attach with 10mm bolt or fixing stud. Suitable for saltwater.Sold singularly...

MG Duff Zinc Galvion Element G1050 for general use and specifically for internal engine and cooler protection.Galvion anode elements come with male threads so that they can be connected up to increase their size or effectiveness. The bottom of the...

The MGDuff ZD78B Hull Anode is a popular bar anode for use in larger cruisers. Made from zinc for use in salwater.Nominal Weight 4.0kgBolt-on, Holes Centres 200mm Length 305mm Width 76mm Depth 36mm     

The MD Duff Zinc Pear ZD77 is one on the most common sized, bolt-on anodes and with its universal 200mm hole centres will retro It can be used in a host of areas around the hull and rudder or may be wired internally to protect equipment. This anode is...

MGDuff AD55 Aluminium Disc Anode 229mm for use in brackish waters. People tend to use zinc because its cheaper but aluminium anodes are a lot lighter and can used in brackish waters.Weight: 7.2kgAnode Body Length: 229mmWidth: 229mmDepth: 25mmStud Size:...

A small 4" Button Anode from MGDuff which can be used in many areas for your boat. People tend to use zinc because its cheaper but aluminium anodes are a lot lighter and can used in brackish waters.Bolt-on Disc 0.4 Kgs Nom Net Weight. Sold 1 per pack.Dia...

MGDuff Bolt-on Disc Anode AD58 is 1.1 kgs and can be place on many areas on the hull of the boat for protection in brackish waters. People tend to use zinc because its cheaper but aluminium anodes are a lot lighter and can used in brackish waters.Dia...

Aluminium Weld On Anode from MGDuff as und. For use in Salt & Brackish Water only. People tend to use zinc because its cheaper but aluminium anodes are a lot lighter and can used in brackish waters.Weight (kg): 2.9kgOverall Length: 380mmAnode Body...

This MGDuff Aluminium Hull Anode AD72B is similar to the AD78B however this one is slightly longer at 225mm or 9".For use in brackish waters.Nominal Weight 4.6kgBolt-on, Holes Centres 225mm ,Length 457mm Width 102mm Depth 64mm Material: Aluminium...

The smaller MGDuff Pear Anode AD76 is weld-on and can used for extra protection in brackish waters. People tend to use zinc because its cheaper but aluminium anodes are a lot lighter and can used in brackish waters.Weld-on Nom Net Weight 0.05kgMaterial:...

MGDuff AD78 Aluminium Anode 305mm for salt or brackish waters. People tend to use zinc because its cheaper but aluminium anodes are a lot lighter and can used in brackish waters.Weld-on, Nominal Weight 2kgLength 356mm Width 76mm Depth 32mm ...