Masterbus

The AC Power Analyser is a multifunctional measuring device which can visualise the AC current and AC voltage, frequency, Cos Phi and power inside the system. Can also be used as MasterBus interface for the Mass Sine series, and offers a free...

The DC Distribution 500 is the smallest distribution model available. It connects up to four DC devices, such as a battery charger, inverter, alternators and solar panels. With the plug & play cable it can be easily connected to the MasterBus network...

As the pinnacle of system intelligence, the Mastervolt Digital DC 10x10A has ten 10 A outputs for all functions including lighting, pumps, electronics, etc. It comes standard with intelligent alarm functions and luxury options include: Follow me home...

The MasterBus CANopen Interface facilitates transparent, 2-way communication between MasterBus and the CANopen standard, which is adopted in many automotive and industrial automation applications. Functionality Programming of the MasterBus CANopen...

This interface integrates a Mastervolt Mass Combi in a MasterBus network and allows it to be operated or monitored via a EasyView 5 panel or PC. General Specifications MasterBus powering: Yes Delivered with: Interface connection cable, MasterBus...

Switches all AC loads, no matter where they are. Loads up to 6 A can be directly switched, higher loads should be switched via a relay. General Specifications Maximum relay current: 6 A (230 V AC single pole) MasterBus powering: No Delivered with:...

Connect up to four switches to the MasterBus network. Delivery includes connection cables. General Specifications MasterBus powering: No Delivered with: Cable with plug, MasterBus cable, MasterBus terminator, manual Dimensions (H x W x D): 66 mm...

FireCAN is an electronic communication system allowing pumps and other equipment to be used via a central control panel on a firefighting truck. The MasterBus FireCAN Interface allows Mastervolt products to be linked into a FireCAN system...

Communicate with your system via mobile phone, allowing you to monitor current information or operate the system by remote control via a text message or easy shortcuts. Alarm notifications per text message are optional. Please note that in some...

The MasterBus Inverter Interface integrates the Mastervolt Mass Sine inverter in a MasterBus network and allows it to be operated and monitored via EasyView 5 or PC. General Specifications MasterBus powering: No Delivered with: Interface connection...

The MasterBus Modbus interface can provide all information from the ‘closed’ MasterBus network for other monitoring and operating systems by means of the Modbus protocol. General Specifications MasterBus powering: No Delivered with:...

MasterBus controllable potential-free contact, with alarm notification on the onboard system (low voltage or no AC), usable as CSI alarm contact. This potential-free programmable contact can be customised and programmed to give your MasterBus network...

The MasterBus NMEA2000 Interface provides the Masterbus network with NMEA information, and vice versa. General Specifications MasterBus powering: No Delivered with: NMEA connection cable, MasterBus cable, MasterBus terminator, manual Dimensions (H...

The MasterBus Philippi Interface makes it possible to view and control Mastervolt products on a Philippi PSM2 display. Mastervolt products use the CAN-based MasterBus protocol to communicate between products. Similar, the company Philippi uses the PBUS...

The MasterBus Power Interrupter switches off parts of the MasterBus network. This reduces the no-load consumption and is useful if a large system will not be used for an extended period. Communication remains possible. General...

Double the maximum length of your MasterBus network. General Specifications MasterBus powering: Yes Delivered with: MasterBus cable, MasterBus terminator, manual Dimensions (H x W x D): 66 mm (2.6") x 78 mm (3.1") x 32 mm (1.3") Weight: 0.09...

Connect conventional Mastervolt products to MasterBus. Data becomes permanently available to allow configuration, operation and monitoring via EasyView 5 or PC. Suitable for Masterlink BTM-III, Mac and Magic DC-DC converters. General...

This interface converts analogue sensor input signals to MasterBus data. Selectable input signals: 4-20 mA, 0-300 Ω, 8-70 V DC. General Specifications MasterBus powering: No Delivered with: MasterBus cable, MasterBus terminator, user’s...

The MasterBus USB Interface enables you to read and configure the MasterBus network via your PC. General Specifications MasterBus powering: Yes (when the PC is switched on) Delivered with: USB connection cable, MasterBus cable, MasterBus terminator,...

MasterShunt is the heart of every MasterBus energy system. This integrated battery monitor shares information about the battery bank with other Mastervolt devices such as battery chargers, Combis, and displays. No surprises: allowing complete automation...

The MasterShunt standard comes with a bus bar. You can also choose a robust Class T fuse, suitable for high short circuit currents of the Lithium Ion batteries, or for ANL fuses. Robust fuse (500 A/160 V DC, 20 kA short circuit current) is suitable for...

Adapter cable to connect NMEA 2000 compatible devices, equipped with an RJ45 connector (such as the MLI-E), to the NMEA 2000 or CZone network.

Switch Input 3 makes Carling switches compatible with MasterBus. Multiple functions can be easily linked with this module. This product does not include frame or switches. General Specifications MasterBus powering: No Delivered with: MasterBus...

This Mastervolt Switch PCB provides LED indications for additional information. For example, the LED will blink when a connected lamp fails. This product does not include frame or switches. General Specifications MasterBus powering: No Delivered...