Optimist Spars

Suits the Optimist sailing dinghies.The Little Hawk MK1 is a small lightweight and robust Wind Indicator designed to be positioned at the top of the mast on dinghies upto 6m. Very popular with Optimists and Toppers the Little Hawk MK1 is also ideal for...

Optimist Outboard End Cap for use with standard 32mm Oppie booms. This outboard version of the Optimist Boom Cap fits on the end/outside of the 32mm boom.Optiparts owns several moulds for producing custom end fittings. All boom end fittings are made...

The Optimist Blackgold Boom in 40mm diameter is a slightly lighter version of the Optiparts 45mm Boom seen in the same section. Like the 45mm version, the 40mm Boom is made from high strength aluminium, black anodized finish and come with cleats and end...

The Optiparts Silver Regatta Boom for the Optimist Sailing Dinghy. Designed as a Silver Regatta Boom which has slightly more strength thank your typical Optimist Boom. This lightweight 40mm Silver Series Boom is much stiffer than the School Boom and will...

Optiparts Clamcleat for Halyard.

The Optimist Halyard Block with an official Harken plain bearing block and hook as seen under Optipart Sailing Spars online. Harken Ball bearing hook-in block as used on Blackgold racing masts. Due to the curved saddle the block rests againstthe mast in...

The Optimist Halyard line with Optipart EX1340 hook-in plain bearing block.As supplied with Silver Regatta Mast Set.

The Optiparts Blackgold Masts 45mm are the strongest Optimist Masts available on the market! The Blackgold has been chosen as the official charter rig for the 2004 I.O.D.A. World, European, Asian and Oceanian Championships which is easy to see why. The...

The Optiparts Silver Regatta Mast features aluminium halyard, downhaul clamcleat and a low friction wind indicator.2 to 1,4 mm Vectran halyard and 3mm Dyneema bridle included in rig pack. To suit the Optimist Dinghy Sailboats. The Silver Series Mast is...

The Mast Step Plug is made from Delrin and fits onto the bottom of the lower section of the Optimist Mast. This is the low friction version of the standard Heel Plug which is suitable for racing and school masts.High Mast Heel plug made from low friction...

The Optimist Mast Top Pins to suit Optiparts Silver Regatta or Blackgold Masts as seen under Optimist Spars and replacements.  Optiparts Top Pins, which do not cut the lines, as supplied with racing masts. Set of 2.

Boom bridle, 3 mm Vectran with stainless steel ring for mainsheet.

Optimist Boom Plug or cap to fit the end of the 32mm Oppie Boom. This inboard version of the Optimist Boom Cap fits between the mast and boom.  Optiparts owns several moulds for producing custom end fittings. All boom end fittings are made of...

Stainless steel lock to secure your mast from coming out of its step when the boat is capsized. This lock has a rubber insert and should be clamped around the mast just under the deck. We suggest you use the collar in addition to the rope locking system...

Pin stop as used on the Blackgold and Gold mast. Black anodized Aluminum with 3 mm hole for mounting. Provides more effective downhaul function.

Pin stop as used on the Silver and School mast.

The Optiparts BlackMax Sprit designed to suit the Optimist Blackgold range of sailing spars for the Optimist sailing dinghy. This is a stronger and stiffer version of the 27mm Sprit which gives more control over the leech of the sail.The 29mm Optimist...

Optimist Sprit Ends Plug for standard 25mm diameter sprit suitable for Optimist Sailboats. Made from nylon plastic. Set of 2 per set.

Nylon sprit adjuster handle with hole for 4 mm rope. For easier handling of the halyard. Designed for Optimist Sailing Dinghies.

The Optiparts Sprit is part of the Silver Regatta range of parts for the Optimist Dinghy Sailboat with 15cm anti-chafe protection. 25.4mm x 1.6m sprit are made of temered 6082 aluminium tube. The Silver Series Sprit has 15cm anti chafe protection tubing...