Boats

Inflation valve to suit Sowester and Talamex Inflatable tenders comes with internal non-return valve and screw in cap.    

Sowester sliding drain bung to suit Talamex Aqualine and Highline Dinghies 270-300 - Provides a drain bung outlet with none return valve on the outside and a side to open or close on the inside.    

Sowester sliding drain bung to suit Talamex Comfortline and Highline Dinghy 195-275. Provides a drain bung outlet with none return valve on the outside and a side to open or close on the inside.    

The Funyak FY180 is a deep sided, 1.8m roto-molded dinghy, ideal as a tender or small inshore fishing craft. Features Flat bottom 2 passengers  Passengers + equipment: 150 kg load Double roto-moulded hull Standard Equipment Rowlocks Secure...

The Funyack FY220 is a deep sided, 2.2m roto-molded dinghy, ideal as a tender or small inshore fishing craft. Features Flat bottom Double roto-moulded hull 3 passengers Passengers + equipment: 225 kg load Maximum outboard engine: 4 HP Short Shaft ...

A popular 'push and twist' dinghy inflator adapter with bayonet style fitting - Suits Sowester, Plastimo or Talamex Dinghies and many more. The adapter locks in place so attention can focused on pumping. Accepts 19mm or 25mm hose.

Replacement Oarlock to suit most Talamex, Plastimo and Sowester Dinghies. Sold Singularly

The Sowester Shoreline 2.50 is a premium inflatable dinghy with an inflatable floor & Keel. It is perfect for use as a yacht tender or small dinghy and will comfortably carry 3 people. Its large diameter tubes provide a higher freeboard which...

The 2.5m long Sowester Cruiseline inflatable dinghy comes with 2 detachable oars, rowlocks, repair kit and a inflatable keel to cut through waves perfect for inshore sea trips or as a tender for a larger boat.The Sowester Cruise Line inflatable boat 2.5m...

The Sowester Shoreline QLS 230 is an economical 2.3m Inflatable dinghy and ideal for use as a compact yacht tender or small portable dinghy. It will comfortable carry 2+1 people people ashore and the slatted floor makes it easy to fold and stowaway...

The Sowester Shoreline QLS 250 is a spacious and economical 2.5m inflatable dinghy and is ideal as a yacht tender or small portable dinghy. It will comfortable carry 2-3 people people ashore and the slatted floor makes it easy to fold and stowaway...

The Sowester Shoreline 2.70 is a spacious, premium inflatable dinghy with an inflatable floor & Keel. It is perfect for use as a yacht tender or small dinghy and will comfortably carry 3 people. Its large diameter tubes provide a higher...

The Sowester TLA300 Inflatable is one of our more substantial tenders, capable of carrying loads up 4 people with some luggage. The Air Mat inflatable floor give great stability and also provides a raised deck to help keep your feet dry, while the...

The Sowester TLX300 Inflatable Dinghy at 300cm is one of our more substantial tenders, capable of carrying loads up 4 people with luggage. The aluminium floor gives great stability and make a solid and substantial platform for standing, while the...

Features Capacity 4.5 pers./ 550 kg Floor Alu, flat and non-skid Model: MX-310/0RABD Specifications Model MX-340/0RABD Reference 66098 Max. number of persons 4.5 Maximum load 550kg Overall dimensions 340 x 154 x 73cm Weight 64...

Features Capacity 3.5 pers./ 425 kg Floor Alu, V-shape and non-skid Model: MX-270/0 RAB S Specifications Model MX-270/0 RAB S Reference 66095  Max. number of persons 3.5 Maximum load 425 kg Overall dimnsions 265 x 159 cm Weight 39.5...

The Sowester outboard transom riser helps accommodate height adjustment when fitting a long shaft engine to a transom that is too deep for a short shaft but not quite deep enough for a long shaft.  Manufactured in powder coated aluminium...

Trem heavy duty, stainless dinghy wheels for stern fixing on small tenders, inflatables and RIBS. Features Max Load 150kg Stainless AIS 316 Frame 26cm Diameter Inflatable Wheels

Bostik 2402 is high performance, two-component, cold curing solvent-based adhesive. It is specifically designed for adhering a variety of rubber-based surfaces as well as rigid and semi rigid surfaces. widely used for bonding Hypalon and Rubber in...

Plastimo Wheels For Dinghy  Features Retractable wheels to mount on rigid transom Suitable for all pneumatic boats not exceeding 110 Kg (total weight, including outboard motor) Supplied in pairs with mounting instructions

The Plastimo Inflatable Trail Tender 3.4m features innovative design and reinforced cones. Equipped with an inflatable V-type hull providing a stable and comfortable ride, the Trail Tender is ideal to use under power, for an easy ride to the harbour in...

Techtread Diamond Grip is an anti-slip rubber deck matting used in a variety of industries, most commonly marine. Suitable for use in cabin soles, cockpit areas, foredecks, boarding ladder treads and sundecks. 3mm thickness, sold per metre, in blue...

Techtread Diamond Grip is an anti-slip rubber deck matting used in a variety of industries, most commonly marine. Suitable for use in cabin soles, cockpit areas, foredecks, boarding ladder treads and sundecks. 3mm thickness, sold per metre, in grey...

Pair of Sowester Dinghy Oars to suit Talamex / Sowester series of inflatable boats and others similar brands. Feature 2 Piece aluminum oars to suit pin and lock style oarlock, as seen in the example below  

Pair of Sowester Dinghy 1.42m Oars to suit Talamex / Sowester series of inflatable boats and others similar brands. Feature 2 Piece aluminum oars to suit pin and lock style oarlock, as seen in the example below

Techtread Diamond Grip is an anti-slip rubber deck matting used in a variety of industries, most commonly marine. Suitable for use in cabin soles, cockpit areas, foredecks, boarding ladder treads and sundecks. 3mm thickness, sold per metre, in black...

Replacement chrome plated bung to suit Fun Yak models 3.7m , 3.9m & 4.5m. Also suits the Fun-Yak Secu 12, 13 and 15 boats.

Halkey Robert style, bayonet inflator hose adapter for inflatable tenders - Suits 19mm hose with multiple thickness adator washers for best fit.

Bostik 2402 is high performance, two-component, cold curing solvent-based adhesive. It is specifically designed for adhering a variety of rubber-based surfaces as well as rigid and semi rigid surfaces. widely used for bonding Hypalon and Rubber in...

The Sowester Steering Console can be put in any Talamex or Sowester Dinghy bigger than 2.9m and allows you to steer the boat from a comfortable centered position.The unit does not include the hub or steering wheel. The Sowester Console does include the...

Take the strain out of launching your dinghy with these handy stern mounted Seago Dinghy Wheels. These convenient launching wheels attach to the dinghy transom and are suitable for boats up to approx 9ft, depending on the keel depth. There are three...

The Sowester 3.5 RIB is comes with an aluminium floor and hull for improved stability on the water. The aluminum RIBs are robust and strong but due to the aluminum hull yet very lightweight. The RIBs are distinguished by the excellent sailing...

The Sowester 3.5 RIB is comes with an aluminium floor and hull for improved stability on the water. The aluminum RIBs are robust and strong but due to the aluminum hull yet very lightweight. The RIBs are distinguished by the excellent sailing...

The Sowester Cruiseline inflatable RIB is 270cm long and comes with an aluminium floor for improved stability on the water.The Sowester RIBs are robust and strong boats but due to the aluminium hull very lightweight. The Sowester inflatable boats are...

The Fun Yak FY250 is a stable 2.5m roto-molded dinghy, ideal as a tender or small inshore fishing craft. The stern wheels make it easier for single handed launching, even on a beach. Pull it up and flip it over and it will stay dry and secure...

Also known as the 'Fun Yak Secu 13' in mainland Europe. Features Tried, tested and preferred by the London Fire Service - the ideal boat to choose against a RIB Its rounded sides allow for ease of recovery Stability allows for multiple...

The Fun Yak Secu 15 Boat 4.5m is in widespread use as a rescue craft with Yacht Clubs, Fire Brigades and rescue agencies but is equally useful for fishing and general purpose use. Features Twin hulled boat for extra safety on the water Manufactured from...

This Fun Yak Standard Steering Console. Features Stainless steel steering wheel and cable Includes a forward locker and stainless steel grab rail Will fit Fun Yak models: 3.7mtr 3.9 mtr & 4.5mtr

Pair of replacement to suit Fun Yak models: Fun Yak Helix, Fun Yak Corraline and the Fun Yak River 2.8 mtr. Features Chrome plated Sold as pair Widest part of rowlock: 49mm i.d Specifications Oar shaft: 12mm Opening diameter: 38mm Please note: our...

Pair of replacement Fun Yak Oarlocks. Features For maximum of 6mm diameter oar To suit Fun Yak Boats: 3.7mtr, 3.9mtr, 4.4mtr & 4.5mtr Sold as pair