Plumbing - Plastic

It is important to have a Jabsco inline non return valve on your pump system when using manual bilge pumps to avoid backflow into your bilge. The valve comes with two hose connectors each end that require hose clips (see related products). This...

It is important to have an inline non return valve on your pump system when using manual bilge pumps to avoid backflow into your bilge. The valve comes with two hose connectors each end that require hose clips (see related products). This non-return is...

It is important to have an inline non return valve on your pump system when using manual bilge pumps to avoid backflow into your bilge. The valve comes with two hose connectors each end that require hose clips (see related products). This non-return is...

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 19mm hose before the pump inlet and is recommended for all manual pumps. - Prevents bilge debris from...

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 25mm hose before the pump inlet and is recommended for all manual pumps. - Prevents bilge debris from...

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 38mm hose before the pump inlet and is recommended for all manual pumps.Suits the Jabsco Amazon Universal...

Model 44705 colour white. The KM fittings below are moulded in off white Nylon, a strong, stable material unaffected by extreme temperature.Nuova Rade Nylon Skinfitting outlet for boats of all types. Designed to be strong, UV resistant and good...

Female to Female threaded CR Brass connecting joint for plumbing. CR Brass is much more resistant to corrosion over time than normal brass. Manufactured in high quality CW602N corrosion resistant brassCertified ISO 9001:2008 from Lloyd’s Register...

Manufactured in high quality CW602N corrosion resistant brassCertified ISO 9001:2008 from Lloyd’s Register.Maestrini - Italy   

Manufactured with CR material, with BSP ports, this strainer is fitted when space is at a premium close to the hull or where it is more convenient to fit remote from skinfitting. Fitted with a polycarbonate top allows the blockage to be seen immediately.

Manufactured in high quality CW602N corrosion resistant brassCertified ISO 9001:2008 from Lloyd’s Register.Maestrini - Italy 

Corrosion resistant brass hose connector. 

Maestrini CR Brass male to female reducer. 

Maestrini CR Brass Male - Male Reducer

Maestrini CR Brass Grated skin fitting in brass. This scoop is designed for raw water intake systems, such as those used for engine coolant. It fits through the hull with the grating on the outside and the male threaded pipe leading inside, usually to a...

Corrosion Resistant Brass Skinfitting with Hose Tail.

Maestrini CR Brass Skinfitting - Part Grated

Maestrini CR Brass Skin Fitting (Max Hull Thickness 40mm).The 3/8" Skin Fitting is made by Maestrini in Italy and made from CR (Corrosion Resistant) Brass.

Slotted Round Strainer. Made from corrosion resistant brass. 4mm countersunk fixing holes. Manufactured in high quality cw602n corrosion resistant brass from Maestrini.Certified ISO 9001:2008 from Lloyd’s Register.Maestrini - Italy 

Brass Tee Piece with three female ends. Manufactured in high quality CW602N corrosion resistant brassCertified ISO 9001:2008 from Lloyd’s Register.Maestrini - Italy