Tanks & Fittings

Stainless steel key to open Plastimo Deck Fillers with two hole, key points. Dimension Studs at 30mm Centres 

Maestrini marine grade bronze deck filler /plate 2021L ,accept 2 1/2" BSP Hose tail for hose and also suitable as an access to emergency through deck, tiller access. Specifications Material: Bronze Thread Size: 2 1/2" BSP Overall Diameter:...

The most reliable and maintenance free tank sender on the market, now with plug and play NMEA2000 connectivity. The NMEA2000 N3 is also very easy to install. Wema's design provides accurate information even in difficult conditions. Suitable for fuel,...

The Nuova Rade Sagliola Fuel Tank 73L meets the requirements of the regulation EN ISO 10088 concerning the boats up to 24 meters length. CE Approved. Features Reinforced and rupture proof Fuel input diameter 50mm Fuel output 90o / diameter...

High quality, stainless steel Wema fuel and water tank senders with 1 1/4" BSP thread (S3) and European 0-190 ohm resistance.  Length 60cm. Over the years Wema S3 Tank Senders have been improved with advances in reed switch technology, allowing them...

Roca Deck Filler Waste Pump-Out Adaptor with  Roca Waste Deck Filler Cap. For use with the Roca Stainless Steel Deck Fillers 38mm & 50mm See here      

Wema HFL 163306 stainless flange kit complete with gasket, inner ring and set of stainless screws with 1 1/4" female thread to take Wema standard stainless senders. Feature Accepts Wema S3/S3H Sensors

Handy strap down kits with 2 straps and snap buckles ideal for securing water and fuel tanks etc. Solid screw down bases hold strap to deck.

The Victron GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for Victron's range of GX system monitoring products of which the Cerbo GX is the most commonly used model. Tank levels can be read-out locally in the...

Nuova Rade waste water tanks are used for toilet waste water storage until being able to safely discharge. BLIZZARD line of horizontal waste water tanks is made of odor-free high-density polyethylene material in brown color. Polyethylene material is used...

The Can SB Fixed Fuel Tank 40ltr is high density polyethylene tank suitable for fuels or acids and comes with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 67ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 54ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 41ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 65ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

The Can SB Fixed Fuel Tank 50ltr is a high density polyethylene tank suitable for fuels or acids, complete with inspection hatch. The hatch is equipped with a cap with vent, suction tube, 3/8" hose connector for air vent and designed for mounting a fuel...

Fuel tank mod. Big-Joe  Tank made of eltex, ISO 13591 certified and compliant with ministerial decree.Complete with reserve.90% filling and cap with screw safety vent.This model is equipped with a self-fishing system with filter.ABYC U.S.A...

Fresh water tanks in high-density polyethylene.Supplied with a polyamide multi-purpose plate.Plate featuring : A 1½" water inlet (delivered as standard with a vent cap). A pickup fitting for hose Ø 17/19 mm (3/8" threaded). An additional...

Developed by the Plastimo R & D, a range of hatches which combines easy installation for the boatbuilder and optimised space for the crew's comfort.Optional locksTake-apart hatch top, ideal when height does not allow full vertical opening : with the...

High density polyethylene tank. Comes with multifunctional polyamide platinum. Dimensions: 800 x 350 x 230 mm (L x W x H). Platinum including: A 1" <>/<> fuel inlet (cap comes standard). One tip for engine supply hose Ø 7-9 mm...

High density polyethylene tank. Comes with multifunctional polyamide platinum. Dimensions: 650 x 350 x 230 mm (L x W x H). Platinum including: A 1" <>/<> fuel inlet (cap comes standard). One tip for engine supply hose Ø 7-9 mm...

Plasticlip pliers in high resistance polyamide and stainless steel hoops basket type. Quick and easy assembly on any tube, nbsp; Ø 15.5 to 25.5 mm, without drilling. Vertical (candlestick, balcony) or horizontal (balcony) mounting: You can change...

Plasti clip pliers in high resistance polyamide and stainless steel hoop tyoe basket. Quick and easy assembly on any tube, nbsp; Ø 15.5 to 25.5 mm, without drilling. Vertical (candlestick, balcony) or horizontal (balcony) mounting: You can change...

STAINLESS STEEL TURNBUCKLE Forks, bolts and pins in polished stainless steel AISI 316.Closed body in chrome plated bronze. Thread Ø* : M 6Axis Ø : 6 mmLength open : 212 mmLength closed : 144 mm*metric thread Thread Ø* : M 8Axis...

Plastimo Walkable Hatch 315 X 440 Black Cut Out 247 X 372

Plastimo polyethylene fuel tank 29L

Plastimo polyethylene fuel tank 24L

Plastimo cap for fuel tank.

Fixing brackets for battery box or fuel tank with 1.50m holding strap. Specifications Nuova Rade Product Number: 43897 Colour: Black Dimensions  

Roca premium quality filler caps for use in conjunction with Roca deck filler fittings. Featuring an integrated opening key and elegantly-cast in electropolished, stainless steel, this deck filler cap has an elegant look and will suit many boats, yachts...

Analogue Wema Water Tank Gauge for monitoring of tank level works with either S3 or S5 senders and come in European 0-190ohms.Available in all white or black face to match the dash on your boat. You can also choose between stainless or white plastic...

Analogue Wema Fuel Gauge for monitoring of tank level works with either S3 or S5 senders and come in European 0-190ohms.Available in all white or black face to match the dash on your boat. You can also choose between stainless or white plastic bezel...

Wema NMEA2000 Silverline series gauges are distinguished, high quality meters with stainless steel bezel and real glass lens. These give your boat a luxurious finish. The instruments are supplied with 1 meter NMEA2000 drop-cable. Features Power supply...

Wema NMEA2000 Silverline series gauges are distinguished, high quality meters with stainless steel bezel and real glass lens. These give your boat a luxurious finish. The instruments are supplied with 1 meter NMEA2000 drop-cable. Features Power supply...

Analogue Wema Fuel Gauge for monitoring of tank level works with either S3 or S5 senders and come in European 0-190ohms.Available in all white or black face to match the dash on your boat. You can also choose between stainless or black plastic bezel...

The Nuova Rade Ercole Fuel Tank 70L meets the requirements of the regulation EN ISO 10088 concerning the boats up to 24 meters length. CE Approved. Features Re-inforced and rupture proof Fuel input diameter 50mm Fuel output 90o / diameter 8mm Pre-cut...

The Nuova Rade Ercole Fuel Tank 55L meets the requirements of the regulation EN ISO 10088 concerning the boats up to 24 meters length. CE Approved. Features Re-inforced and rupture proof Fuel input diameter 50mm Fuel output 90o / diameter 8mm Pre-cut...

This fitting is required when using Deck Filler Body 47420 for Waste Pump Out.    

Nuova Rade Water Tank Fitting Kit with 90 degree elbow connectors for the Nuova Rade Ercole and Sogliola water tanks.  Features Suitable for fuel and water tanks For use with hose of 1.5" or 38mm diameter Nuova Rade product number...

Nuova Rade Water Tank Kit with 38mm straight connectors - a selection of fittings to complete the installation of all Ercole & Sogliola Water Tanks. Features Suitable for fuel and water tanks Model 44089  For use with hose of 1.5" or 38mm...