Optimist Dinghy Parts

The Optiparts Blackgold Masts 45 mm are the strongest Optimist Masts available on the market! The Blackgold has been chosen as the official charter rig for the 2004 I.O.D.A. World, European, Asian...

The Mk3 set is less stiff than the Optiparts Black Gold Spars and is suitable for lighter sailors (up to 45 kg). Heavier sailors should consider using Blackgold or Optimax spars. Set Contains 1 x...

There is no equal to the Optiparts BLACKGOLD™ Optimist spar sets. This medium selection will suit sailors of all weights Features All black fittings Hard anodized cleats Black sprit chafe...

The Optimax Mk3 Racing Boom is lightweight and flexible, a fully rigged 40 mm racing boom that is mainly suitable for sailors below 35 kg Features High-grade alloy, dark grey anodized Glass...

High performance, fully rigged  Optimax OX35 Boom suitable for sailor above 45kg - A lightweight yet ultra stiff and powerful 48 mm racing boom which is mainly suitable for the more experienced,...

The Optiparts Optimist Training School Boom EX1030 has blue nylon in and outboard end fittings, a nylon outhaul cleat, and nylon fittings for mainsheet and downhaul attachment. Not suitable for...

Lightweight aluminium trolley for the Laser® Pico. Spring locking quick release of all parts allows the trolley to be disassembled in a matter of seconds for storage and travel. The frame has welded...

Sowester 4mm R-Clip in AIS304 stainless, universally fits most dinghies launching trolleys for wheel retention. Use in conjunction with Sowester Nylon Wheel Washers Specifications Material: Stainl

Optimist 48L Yellow Buoyancy Bag with twist lock tube and valve. The 48L buoyancy bags are slightly heavier than the 43L buoyancy bags, but tend to leave a lot less water in the boat after a capsize...

Optimist 48L Blue Buoyancy Bag with twist lock tube and valve. The 48L buoyancy bags are slightly heavier than the 43-liter buoyancy bags, but tend to leave a lot less water in the boat after a...

Sowester nylon launching trolley wheel washers suitable for Laser/ ILCA stacking trollies and others dollies or trailers with 25mm axle diameter - Pack of 2  Features  Heavy Duty 27mm Inside...

This Seitech Laser Launching Trolley is light, yet robust, and is very easy to handle. It is collapsible for transport or storage. Features Corrosion-resistant aluminium construction Disassembles...

The Optiparts Optimist Halyard System with Low Friction Ring is a high-performance halyard rigging solution designed specifically for Optimist dinghies. This is a Optimist Halyard system with Win...

Boom button for the Silver and School booms from Optiparts.

These Optimist buoyancy bags are made of polyurethane-coated nylon and are about half the weight and significantly stronger than buoyancy bags made of PVC or PVC-coated nylon. Some buoyancy bags are...

Optiparts PFTE Mast Disk for Optimist Mast Step. Teflon mask disk that protects the Optimist mast and mast cup against wear and tear. Specifications Disk diameter: 46 mm Disk thickness: 1 mm

The Optimist X-gripped Colour Series Yellow edition.  A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with yellow x-gripped heat-shrinkable tubing and a releasable...

The Optimist X-gripped Colour Series Red edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with red x-gripped heat-shrinkable tubing and a releasable joint...

The Optimist X-gripped Colour Series Green edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with green x-gripped heat-shrinkable tubing and a releasable joint...

The Optimist X-gripped Colour Series Blue edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with blue x-gripped heat-shrinkable tubing and a releasable joint...

The Optimist X-gripped Colour Series “Doppio” edition.  A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with a special x-gripped heat shrinkable tubing, called...

The Optimist X-gripped Colour Series Black edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with black x-gripped heat-shrinkable tubing and a releasable joint...

Deluxe Jamaica special Optimist tiller extension, black anodized aluminium with a releasable rubber joint/swivel and long multi coloured foam grip. The joint incorporates a fibre core molded up in...

Heavy-duty rubber corner protectors for Optimist with self-adhesive backing. These can be used on the bow only or on all 4 corners. Features Special pre-shaped rubber profile This is not a flat...

Optimist upgraded rigging pack for School spar sets. Features Halyard Control lines Bridle with ring Set Contains 6 mm polyester vang 5 mm polyester halyard 4 mm polyester outhaul 3 mm Vectran...

Optimist mast extender 40 cm to be used with Optimist sleeve mast. The Optimist mast extender is available as a separate item for the Sleeve School mast. This mast extender can be dropped on the top...

Features Meets IODA certification Airbag for floatation in optimist boat and other boat types Specifications Volume: 46 L Inflated size: 29cm x 92cm Deflated size: 44cm x 98cm Radius:...

Cover for Optimist. Made from heavy-duty 600D dual-coated polyester canvas. There are slats in the tarpaulin.  Features With a unique drain batten system Standard Optimist size Material Heavy-duty...

This Optimist bottom cover is made from heavy duty 600D dual coated polyester canvas.  Features Standard optimist size Foam panels for bottom protection Material Heavy-duty 600D dual coated...

The new Laser trolley side support from Windesign Sailing has a better fit in the Laser gunwale and is much stronger. This product is compatible with Laser® but is not an original Laser® product...

ewewqThe lightweight alternative to a block, with no moving parts, these are an extremely low-maintenance item. Unlike some other manufacturers, our rings are hard anodized with PTFE coating to...

Button used for the Optimist downhaul on the Optiparts school booms and used as button for the retainer shock cord on Sleeve masts. Not suitable for racing.

This all-round racing mast is designed for mid weight sailors and can be matched with all booms and sprits. The MK3 mast for the Optimist is mainly suitable for sailors from 35 to 45 kg...

Sprit protection for 25 mm Optimist sprits. Heat shrinkable tubing for protection between Optimist sprit and mast. A hair dryer or paint stripper can be used for shrinking the tubing around the sprit...

The most popular round type step for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be...

This mast sleeve is fitted around the mast at deck level and protects the mast from wear. Optimist mast sleeve as supplied with Black gold masts. Mounting the sleeve You will notice the sleeve is...

Optiparts Optimist Blackmax Racing Sprit End - Black - 29mm Specifications Colour: Black Number of ends: 2 Diameter: 29 mm

Optimist deck collar with an oval and tapered inner diameter. The oval inner diameter allows the maximum fore/aft play and minimum side play. The EX1210 has a separate sleeve that is fitted around...

Optimist sprit ends for 27 mm racing sprits. Sold per pair. Specifications Number of ends: 2 Diameter: 27 mm

The Optiparts Optimist 45mm Blackgold Power Boom is a stiffer Optimist boom to keep more tension on the leech for the heavier sailor. The smaller bridle gives more space when tacking...