The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

MGDuff ZD80 Zinc Anode 356mm Weld On

(No reviews yet) Write a Review
SKU:
45352
Salt water
$89.90

Description

The MGDuff Flat Bar Anode ZD80 is suitable for hulls in salwtwater and can welded on. 

Nominal Net Weight 8 kg
Length 356mm Width 152mm Depth 32 mm 
Material: Zinc for Saltwater Protection
Length: 152mm
Width: 150mm
Depth: 305mm

Guide:

1. Choose your material:
- Zinc for saltwater boats
- Aluminium for saltwater or brackish waters
- Magnesium for fresh water
2. Select Style and Model:
- Bolt-on hull anodes come with 8" or 9" hole centres (You have to buy the studs or bolts separately) weld-on requires the anode to be welded in place (usually commercial vessels)
- There are different models of anode depending on where you put it. Shaft and beneteau anodes protect the drive shaft and stern tube. Hull anodes can be placed anywhere depending on where you want to protect and pencil/engine anodes tend to be specially designed for each brand and model engine. Button or disc anodes are designed to protect rudder / trim tabs.

*For more information on placement or engine anodes please contact us on 00353 28 23190.

**With regard to steel boats, it is vital that special attention is paid to areas around the water line. These are particularly vulnerable but receive no protection from anodes above the water line.

***All MGDuff anodes will suit wood, GRP or steel hulls. For aluminium hull anodes please contact one of our branches.

Composition:

High spec MGDuff Zinc Anodes for leisure and commercial vessels.
Composition:
Iron: FE 0.005 Max
Cadmium: Cd 0.025-0.07
Copper: Cu 0.005 Max
Aluminium: Al 0.10-0.50
Lead: Pb 0.006 Max
Others Total: 0.10 Max
Zinc: Remainder
Potential Ag/AgCl -1.05v
Capacity-Amp.hr/kg 780

View AllClose

Additional Information

View AllClose