International VC Prop-O-Drev Primer is a special formulation, VC Prop-O-Drev Primer is perfect for use with Prop-O-Drev on outdrives, outboard legs, propellers and sterngear. And because it’s an aerosol, it’s ideal for painting awkward shapes...

MARINE STRIP is a powerful, water washable solvent free paint stripper that will remove oil and alkyd based paint, varnish, wood stain and anti-fouling. Easy to apply, MARINE STRIP dissolves paint in the smallest recess, softening all accumulated layers...

MARINE STRIP is a powerful, water washable solvent free paint stripper that will remove oil and alkyd based paint, varnish, wood stain and anti-fouling. Easy to apply, MARINE STRIP dissolves paint in the smallest recess, softening all accumulated layers...

Product description This is an advanced hard antifouling. Features It provides very good fouling protection. It gives a hard, smooth and polishable surface No chalking Recommended use To be used on boats sailing in all ranges of speed, especially for...

Jotun Aqualine Optima Spray is a new generation of protection for drives and other light-metal components below the waterline. It provides outstanding protection against fouling throughout the entire season. Areas of use For drives, propellers, flaps...

International Trilux Prop-O-Drev is incredibly hard antifouling has been specially formulated for use on outdrives, outboard legs, propellers and sterngear. Designed to be applied using an aerosol, it makes it far easier to reach difficult areas. Use...

International VC 17m creates an incredibly smooth surface even without sanding. Its low friction finish can then be burnished to create an even smoother finish. Use antifouling paints safely. Always read the label and product information before use...

International VC Offshore EU Antifoul is quick drying, antifouling formulation produces a hard thin film that can be burnished to a very smooth finish. This makes it perfect for power and sail boats as it creates extra speed and efficiency. *Use...

Francis waterproof 3 pin plug and socket with captive cap to suit the FSP127 Aldis Lamp. This power supply point can be used as a bulkhead connection to power your signalling light anywhere you need. Chrome plated brass connector with sealing ring and...

C05971-01 Amber Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the amber lens. Specifications Weight: 103g  Quantity: 1 Diameter: 146mm

C05971-01 Yellow Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the yellow lens. Specifications Weight: 103g  Quantity: 1 Diameter: 146mm

C05971-01 Blue Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the blue lens. Specifications Weight: 103g  Quantity: 1 Diameter: 146mm

C05971-01 Green Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the green lens. Specifications Weight: 103g Quantity: 1 Diameter: 146mm

C05971-01 Red Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the red filter. Specifications Weight: 103g  Quantity: 1 Diameter: 146mm

Replacement 24v x 60w lamps suits the Francis Aldis Lamp FSP 127. Francis part no: D1721. Notes SOLAS approval for commercial ships requires 3 bulbs

Replacement 12v  x 60w lamps suits the Francis Aldis Lamp FSP 127. Francis part no: D1721. Notes SOLAS approval for commercial ships requires 3 bulbs

12v lead acid battery charger C26664-00 to suit Francis Aldis FSP127 Signalling Lamp -  Input voltage 110-240VAC, Output 14.7 VDC. Specification Charge Rate: 12v vdc @ 2 amp  Input: 110v / 220v AC Output: 12v DC Weight 1...

The Francis Aldis Light Kit sends light signals for communication for large vessels at sea. It contains everything you need to comply with the SOLAS regulation regarding commercial vessels. Comes with 2 x filters, 3 x 12v bulbs, 1 x 24v battery charger...

The Francis Aldis Light Kit comes with everything you need to comply with the SOLAS regulation regarding commercial vessels. Comes with 3 x filters, 3 x 12V bulbs, 1 x 12V battery charger and a storage case as under Francis part no: A6134.Comes with high...

The Francis FSP127 Aldis Lamp fulfils the requirements of the Solas (1997) Regulations, which states that all ships of over 150 tons gross tonnage, when engaged on International voyages, shall have onboard an efficient daylight signalling lamp which...

The Osram Bulb GY6 is in 24 volt and 1 watt.Features Brilliant accent light Incredibly small dimensions for revolutionary new luminaire designs Approved for use in open luminaires (to IEC 6598-1) Axial filament for optimum directional light...

The Osram Bulb GY6 is in 24 volt and 5 watt.Features Brilliant accent light Incredibly small dimensions for revolutionary new luminaire designs Approved for use in open luminaires (to IEC 6598-1) Axial filament for optimum directional light.

The Osram Bulb GY6 is in 12 volt and 1 watt.Features Brilliant accent light Incredibly small dimensions for revolutionary new luminaire designs Approved for use in open luminaires (to IEC 6598-1) Axial filament for optimum directional light.

Extension Harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install Secondary Remote Control Kits. Features For searchlight installations where cable length exceeds that supplied with the...

Replacement Searchlight Control to suit the Jabsco 135SL Lights. Suits both 12 V and 24 V version of the searchlights. Specifications DC voltage: 12 V/24 V Weight: 0.12 kg

Comes with gasket to suit the Jabsco 155SL Remote Control Searchlight. Replacement bulb to suit the 12 V or 24 V 155SL. Specifications DC voltage: 12 V/24 V Bulb power: 50 W Fuse size: 5 A Candle power: 1,00,000

A replacement sealed beam unit to suit both 12 V and 24 V systems. This replacement bulb fits the Jabsco 135SL Searchlights. 135 SL - 60020-0000 Specifications DC voltage: 12 V Fuse size: 4 A Bulb power: 50 W Candle power: 1,00,000 135 SL -...

The Francis MK1 Searchlight M Series is seen here on the right. The MK1 will suit either a 12v/24v in 5w/1w bulb (sold seperately) which can be ordered under the related products tab below.These attractive, quality built searchlights are suitable for...

The Francis Searchlight M Series featuring the M1 seen here on the right. The M1 will suit either a 12v or 24v bulb (sold seperately) which can be ordered under the related products tab below.These attractive, quality built searchlights are suitable for...

A replacement Jabsco Sealed Beam Bulb for the Jabsco 146SL Searchlights (see related products). Suits both 12 V and 24 V versions of the search lights. 146 SL - 60080-0012 Specifications DC voltage: 12 V Fuse size: 4 A Bulb power: 50 W Candle power:...

DanLamp Navigation Light Replacement Bulb P28S - 24V 50CD 40W Specifications DanLamp Item Number: 10043 Voltage: 24 V Rated wattage: 40 W Cap-Base: P28s Mean service life: min. 1000 timer Luminous intensity: 50 cd Product EAN: 5708995100433 NATO Stock...

DanLamp Navigation Light Replacement Bulb  P28S 110V 50CD 60W Specifications DanLamp Item Number: 10067 Voltage: 115 V Rated wattage: 60 W Cap-Base: P28s Mean service life: min. 1000 Hours Luminous intensity: 50 cd Product EAN: 5708995100679 NATO...

DanLamp Navigation Light Replacement Bulb P28S - 220V 50CD  65W Specifications DanLamp Item Number: 10056 Voltage: 230 V Rated wattage: 65 W Cap-Base: P28s Mean service life: min. 1000 Hours Luminous intensity:50 cd Product EAN: 5708995100563 NATO...

Danlamp Navigation B22 Bulbs are an efficient light source for providing optimum perfromance and reliabilty under all conditions. The bulbs are particularly resistant to vibrations and fluctuations in temperature and humidity. Corrosion resistant brass...

Aqua Signal replacement lamp holder with twist lock base. Suitable for Series 40 Navigation Lights Suitable for BAY 15d Lamps

Replacement SM Navigation Light Lamp 12V x 12cd x 10W for Stern and Anchor Lights. Suits Aqua Signal Series 40, 41 & 55 as well as other manufacturers requiring a Bay15d fitting. Danlamp is a leading supplier of signal lamps for the shipping industry...

DanLamp Navigation Light Replacement Bulb Bay15 12V x 12cd x 18W Specifications DanLamp Item Number: 10028 Voltage: 12 V Rated wattage: 18 W Cap-Base: Bay15d Mean service life min.: 1500 timer Luminous intensity: 12 cd Product EAN: 5708995100280...

DanLamp Navigation Light Replacement Bulb Bay15d - 24V 24CD 25W Specifications DanLamp Item Number: 10037 Voltage: 24 V Rated wattage: 30 W Cap-Base: Bay15d Mean service life: min. 1500 Hour Luminous intensity: 24 cd Product EAN: 5708995100372 Diameter...

DanLamp Navigation Light Replacement Bulb Bay15d - 12V 30CD 25W. Specifications DanLamp Item Number: 10065 Voltage: 12V Rated wattage: 25W Cap-Base: Bay15d Mean service life min.: 1000 timer Luminous intensity: 30 cd Product EAN: 5708995100655 NATO...

The Aquasignal Series 70 Double YELLOW TOWING Navigation Light is applicable for all vessels ≥ 20 m in length  ( Note images does not show correct colour). These Navigation lights fulfil all requirements of International Regulations for...