Maestrini replacement clear lid for use with the bracket mounted range of remote water strainers. This lid is made from polycarbonate materials and is a direct replacement for the original lid. This lid is for use with the brass strainers with...

Maestrini strainer basket, suitable for use with the bracket mounted range of remote water strainers. This strainer filter is made from plastic and is a direct replacement for the original basket. This filter is for use with the brass strainers with...

The Maestrini strainer basket is suitable for use with the base mounted range of remote water strainers. This strainer filter is made from polypropylene and is a direct replacement for the original basket. This filter is for use with the brass strainers...

The Maestrini pipe blanking cap is made from bronze. This material is tough and corrosion resistant making it suitable for exposure to sea water. This blanking cap acts as a stopper for male threaded pipes. The blanking cap has a 1' 1/2'' BSP female...

A reliable non-return valve designed for marine and general plumbing use, the Maestrini Swing Check Valve with Metal Disc allows fluid to flow in one direction while preventing backflow. The metal disc (flap) swings open under forward pressure and closes...

This Maestrini sump pump has two fixing pumps for easy mounting both 1/2" in size. Ideal for oil changes on inboard engine and gearboxes. Inlet & Outlet Hose Tail: 12mm (1/2”) Specifications Height: 214mm (piston fully down) Material:...

This Maestrini quick release greaser comes with a universal base mounting plate allowing it to be installed in a vertical or horizontal orientation. These greasers can be remotely mounted and connected to pipework for easy lubrication of propeller shaft...

Maestrini scoop strainer made from bronze, with a wedge shaped grating. This scoop is designed for raw water intake systems, such as those used for high speed vessels. It fits through the hull with the grating on the outside and the male threaded pipe...

Maestrini threaded skin fitting made from bronze. This material is tough and corrosion resistant making it suitable for exposure to sea water. A skin fitting connects to a threaded pipe and is designed for through hull applications. This skin fitting...

The Maestrini Bronze Bracket Mounted Water Strainer “Venezia” in 2″ size is a rugged marine-grade sea water filter unit designed to protect pumps and plumbing systems from debris and fouling. Built from quality bronze with a transparent...

Official replacement part for the Lofrans Windlasses, the Lofrans Windlass Bearing 537 fits the Porgress 2 and Leopard models. Feature Suits the Lofrans Progress 2 and Leopard series of Windlasses    

Lofrans Titan Windlass Spacer #653 Feature Suits the Lofrans Titan Windlass

Features Replacement part for the Lofrans Titan Windlass 4" diameter

The Lofrans Falkon Windlass Washer #434 fits the bolt that secures the cap that fits onto the chain gypsy. Feature Suits the Falcon Windlass Parts Diagram The Lofrans Falkon Windlass Washer is shown under part no: 434 below:  

Replacement Washer for the Lofrans Falkon Windlass. Fits onto the bolt securing the rope drum. Specification Lofrans part no: 390

Lofrans Titan Bearing Ring Feature Suits the Lofrans Titan

Feature Suits the Titan Windlass Parts Diagram The Lofrans Titan Bearing 51108 #632A is listed under part no: 632 below:

Lofrans Titan Windlass Spacer. Feature Suits the Lofrans Titan Windlass

Feature Suits the Lofrans Titan Windlasses

Stainless steel spring used in Lofrans Windlasses. Feature Suitable for the Lofrans Tigre, Titan, Cayman, Falcon Windlasses from Lofrans

Lofrans Bearing Ring Im1520164 #348 Feature Suits the Lofrans Tigres, Titan and Falkon windlasses

Feature Suits the Lofran Titan

Lofrans Cone Clutch Tigres 318B 10mm.    

Replacement spare part for the Lofrans Titan Windlass.

Lofrans Falkon Bush Nylon 437C also under 437A.

Lofrans Falkon Windlass Stripper 467

Lofrans Falkon Cone Clutch #436 Features Made from stainless steel Supports the gear on your windlass

The Replacement part for the Lofrans Falkon Windlass, the Clutch Nut Falkon Chrome part no: 435 is chrome finish.

Replacement part to fit the Lofrans Falkon Windlass Drum Upper Part. Feature Material Chrome plated bronze Parts Diagram Falkon Windlass Drum fits part no: 839A as per below:

Lofrans Falkon Windlass Chain Pipe 469 is a thru deck fitting that guides the chain onto the gypsy. Feature Ensures the smooth movement of the chain from and to the chain locker

Lofrans Falkon Windlass Drum Bottom Section 840 comes in two parts (upper section sold seperately). Specification Material: Chrome plated bronze

The Lofrans X2/ Project 1000 Gipsy engages 8mm chain for use with vertical windlasses. Specifications Chain diameter: 8 mm ISO 4565 / DIN 766 Material: Stainless steel Suits: Lorans X2 or Project 1000 Windlasses

The Lofrans X1 DC Replacement Motor in 12V for 500W windlasses. Feature Official replacement motor for the Lofrans X1 Windlass Specifications power supply: 12V  Pole diameter: M5 Screw hole diameter: M4 Drive shaft diameter: 11 mm Drive shaft...

Lofrans Project X2 Replacement Motor comes in 1000 watt for 24 volt power supply. Features Direct replacement for the X2 Lofrans Windlass Waterproof IP56 High power 1000 Watt motor Specifications For Lofrans Airon, Kobra, Progress 1 ( Also X1,...

The Lofrans SX2 Vertical Windlasses are suitable for sail and motor boats from 6m to 27m in length. Includes Dual direction solenoid pack Rope drum Handle Gypsy for chain CD / Instruction manual Features Compact round base design Marine AISI 316L...

Replacement of a 45-gram gas cylinder for Gas Inflation Life Jackets. Generally suits 220N Lifejackets, but very important to check the correct size before fitting.  The size of the Cylinder is normally printed on the bladder or the label of the...

The Lewmar Helm Shaft Seal is an offical replacement for the Lewmar Cobra Input Helms.

The Lewmar Size 00 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 0

The Lewmar 30-48 Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 48ST Lewmar part no: 45000029 Part Diagram The diagram below shows the Lewmar 30ST...

The Lewmar 15-16ST Winch Gear Spindle Sleeve is an official spare part for the Lewmar. Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 15-16ST Lewmar part no: 45000033 Part Diagram The diagram below shows the Lewmar...