Boom and Mast

High quality, replica upper mast for Pico Sailboats 

RS LaserPico mast gate assembly, which includes the claw and mast gate pin, but the screws are sold separately. Complete mast gate fully assembled ready to bolt in place, includes claw but not the mast gate pin and rope Screws Required 2 x M6 x...

RS Pico, formerly Laser Pico, aluminium upper mast complete. Specification Material: Aluminium Shipping Notes This product can only be shipped within Ireland. We have applied a shipping surcharge due to the length of the item.

Genuine RS Pico, formerly Laser Pico, lower mast. Aluminium with all fittings included. Specifications Tube material: Aluminium Length: 2.25m Diameter: 7cm Weight: 4kgs

Holt Laser Pico Lower Mast, all fittings included - This is a high-quality replica product This metal Laser Pico lower mast section is the perfect fit for your Laser Pico sailing dinghy. The Pico bottom mast comes complete with the end caps and fittings,...

The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat with a fairlead to guide the rope into the teeth. The specially shaped base means the CL211 Mk1 can be fitted to either curved or flat surfaces The CL211 Mk1 has a silver stove...

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

The Mast Sleeve to suit the Laser Pico is fitted using 3/16" x 5/8" rivets (not included). The Pico Lower Mast Collar attaches to the mast and holds the boom in place. A rivet is used to hold the Pico Lower Mast Collar in Place...

Mast step plate, black plastic, with a large hole to take the mast foot, and 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

The Laser Pico Gooseneck is the plastic  U-shaped fitting that attaches the mast to the boom while allowing it to swing freely. Comes with a U-shaped clamp and boom insert.  The Pico Gooseneck attaches the boom to the mast via a simple clipping...

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

RS Pico webbing loop to fit Pico Boom with stainless rivet.  

Replacement Pico Boom with cleat, outhaul, and boom block. Official Pico parts are constructed from aluminium. Specification Material: Aluminium

The Laser Pico Vang Plate for the boom has two attachment holes (3/16" x 1/2" rivets sold separately) and a flat base.  For a full Laser Pico Vang kit, see code: LS-90507. Pico kicker vang boom plate. Specification Material: Stainless steel

Eye Plate to attach the vang system to the mast on the Laser Pico. The Vang Mast Plate features three attachment holes (3/16" x 1/2" rivets sold separately) and a curved base designed to fit the Pico Mast. Specification Material: Stainless steel

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

Laser Performance Pico/Funboat Upper Mast Base Plug black plastic fits on the bottom of the top mast, fixed with 2 x rivets (sold separately). Specifications Material: Plastic Colour: Black

Plug black plastic fits on the top of the mast, fixed with rivets x 2 (sold separately). It can also be used as a Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

The Laser Lower Vang Block is used for the Laser Pico and Laser Standard rig sailboats on the top section of the Vang which attaches to the eye plate on the boom.Comes with removable pin to attach to eye plate (eye plate LS-91532 sold...