Fenders

The Plastimo Peformance Inflated Fender is manufactured from soft, shiny and UV resistant PVC. Can be used either horizontally or vertically. Thanks to the design of the fender’s extremities, the PVC spreads evenly inside the mould during the...

Plastimo Bow Fenders are invaluable for small to medium sized boats who are constantly approaching piers and jetties to moor against. Not only do they provide good protection to your boat but they can  also prevent damage to vessels. 35x35cm in blue...

The most versatile fender storage solution on the market. Manufactured in marine grade AISI 304 stainless, these fenders baskets are easy to install and offer multiple mounting options. This is for the Basket only Connectors are required in addition...

A traditional fender will tilt away from the hull and may eventually slip above or below, whereas the articulated RIB fender follows the curves of the hull and remains in the right position to protect the boat efficiently. Features A clever solution...

The Plastimo Peformance Inflated Fender is manufactured from soft, shiny and UV resistant PVC. Can be used either horizontally or vertically. Thanks to the design of the fender’s extremities, the PVC spreads evenly inside the mould during the...

The Clamcleat CL223 Loop cleat is a nylon cleat for tensioning lines. Rigged onto a rope, the CL223 is quick to tension, easy to adjust and release. Features Lightweight Generous opening at the top of the teeth, so it is easier for the rope to...

Fendress single layer, fender covers are manufactured using non abrasive, loop knit acrylic to create premium quality sleeves with no seams. They specially designed to protect your boat's hull from fender abrasion and wear which not only...

Very handy Plastimo flat fenders with loads of useful applications - Great for use where a conventional fender may easily displace Also duplicates a great kneeling pad. Features Semi-rigid fenders will not puncture or deflate Double eyes top...

Pair of single fender ,rail mount spring loaded brackets. Features Both clips feature a spring mounted bracket which holds the narrow ends of the fender The clips can be adjusted up and down the rail, the only limit being the rail length When fenders...

Dan Fender Bow Fenders have been carefully designed in order to stay in position and to protect the bow of your boat. They are produced in two sizes and each having 3 eyes, which makes fastening easy and safe, for maximum protection. Specifications

Fendress single layer, fender covers are manufactured using non abrasive, loop knit acrylic to create premium quality sleeves with no seams. They specially designed to protect your boat's hull from fender abrasion and scuffing, which not...

Plastimo Bow Fenders are invaluable for small to medium sized boats, who are constantly approaching piers and jetties to moor against. Not only do they provide good protection to your boat but they can also prevent damage to vessels...

The Plastimo Peformance Non-Inflated Fender is manufactured from soft, shiny and UV resistant PVC. Can be used either horizontally or vertically. Thanks to the design of the fender’s extremities, the PVC spreads evenly inside the mould during the...

Provides efficient protection against rubbing and chafing adapts to all hull shapes, and more particularly to RIB tubular shapes. Also ideal to protect the hull or the tubes of a RIB when trailered : just insert the half-moon fenders between the boat...

A pair of Nawa parallel connectors used to connect a series of Nawa fender baskets together in parallel. One pair is required for each join. Manufactured in UV resistant Nylon with AISI 304 Stainless fixings.

The Plastimo Stern Fender has been designed to fit and protect the stern quarter of the boat. This simple and inexpensive solution to prevent stern damage to you and other boats. Specifications Colour: white Inflatable 2 Eyes on ends 1 Central...

Polyform Fender F3 - Black (21.5cm X 74.5cm) F-series cylindrical fenders have set the standard for heavy duty fenders for close to 60 years. The newest generation are made by use of Polyform's unique, in-house developed and patented Polymatiq technology...

Very handy Plastimo flat fenders with loads of useful applications - Great for use where a conventional fender may easily displace Also duplicates a great kneeling pad. This is the largest size at just short of 1 metre. Features Semi-rigid...

HL-series High-linerCylindrical, bullet-shaped POLYFORM® HL-buoys are specially designed to reduce drag when used under conditions with strong currents. The special oval design and ribs along the body contribute to a lower drag and for the buoy to...

Features Curved shape to fit the RIB or tender tube Provides efficient protection against abrasion along pontoons or jetties Stacks easily for storage Made from closed cell polyethylene foam, UV-and hydrocarbon resistant Specifications Colour: Grey...

Large heavy duty Polyform F6 Fender dia 29.0cm, length  109cm F-series cylindrical fenders have set the standard for heavy duty fenders for close to 60 years. The newest generation are made by use of Polyform's unique, in-house developed and...

Plastimo Bow Fenders are invaluable for small to medium sized boats, who are constantly approaching piers and jetties to moor against. Not only do they provide good protection to your boat but they can  also prevent damage to vessels...

Plastimo's Ø 25 x 90 cm bumper fenders are excellent for lining a marina berth and provide fendering protection when moored or during docking. This 3/4 design is easily secured to the pontoon edge and becomes a permanent fender solution...

Provides efficient protection against rubbing and chafing adapts to all hull shapes, and more particularly to RIB tubular shapes. Also ideal to protect the hull or the tubes of a RIB when trailered : just insert the half-moon fenders between the boat...

The POLYFORM® F11 is a supreme heavy duty fender with a dual valve system incorporated in the extra strong pre-made injection moulded rope holds. The fender and the rib reinforced rope hold are unified through the in-house developed roto-molding...

Plastimo's Ø 25 x 90 cm bumper fenders are excellent for lining a marina berth and provide permanent fender protection when moored or during docking. This Foam filled version provides has extended durabilty, while the 3/4 design gives a a secure...

This Plastimo articulated fender is excellent for 'padding' out your berth and giving extra protection against those sharp corners. Its flexible shape allows it to fit around 90 angles, as well as round or facetted edges. Features Size 18cm dia. x...

Marina Bumper Fender MF60 sold 2 per pack. The MF60 Marina Fender is Polyform's smallest dock fender for boat protection. It's easily attached to most docks by use of mounting brackets (included) and 4 appropriate screws or by cable-tyeing it to a post...

Plastimo 66203 white trim end fittings to suit Plastimo 40mm radial PVC rubbing fender profile P 66202. Features 40mm Profile Sold singularly Colour White

Uniquely shaped to fit the stern of a sailboat or the edge of most swim platforms up to 4" thick. An integral 3/4" diameter tube allows a securing line to pass from end to end while a contoured shape helps grip the fendering location. Made from soft,...

Fendress single layer, fender covers are manufactured using non abrasive, loop knit acrylic to create premium quality sleeves with no seams. They specially designed to protect your boat's hull from fender abrasion and scuffing, which not...

Same technical features as Plastimo Performance fenders. Two-colour version with white fender body and black cone ends. Can be used either horizontally or vertically. Perfect shock absorption no matter where the impact is on the fender, largely down to...

Polyform Fender F8 - White (37.5cm X 144cm) F-series cylindrical fenders have set the standard for heavy duty fenders for close to 60 years. The newest generation are made by use of Polyform's unique, in-house developed and patented Polymatiq technology...

The V-10 valve is a non-return type of valve, fitted with a protective valve screw. For inflation, the screw has to be removed. Air is blown into the valve, and the valve screw has to be set back in place in order to fully secure any loss of air from the...

Plastimo performance fenders are precision rotomoulded to ensure the even distribution of the PVC throughout the making of the fender. The result is robust and durable fender at a very economical price. Supplied with Fender Line Specifications Approx...

Features Curved shape to fit the RIB or tender tube Provides efficient protection against abrasion along pontoons or jetties Stacks easily for storage Made from closed cell polyethylene foam, UV-and hydrocarbon resistant Specifications Colour: Grey...

The Plastimo foam filled white 1/2 Fender Bumper is really efficient, suitable for all pontoon or catway shapes - square or round-end. Sturdy construction, from roto moulded PVC, UV-ray protected. Registered design. Features Max. pressure - 0.10 bar...

Plastimo radial profile fender fixing track. Pack of 8pcs x 2m tracks. Component used for fixing 40mm Plastimo Radial Profile Fendering to the hull of a vessel. Features Suits 40mm Profile Forms to hull curve Pack of 8 length, each length 2mtr Colour...

Plastimo Tessilmare radial PVC fender profile (Rubbing strake) Supplied in 16m rolls x  40mm width. These patented fender profiles combine high-impact strength with elegance and good value. Features 40mm Profile 16mtr Roll Forms to hull...

Plastimo 66199 white trim junction fittings to cover join when using Plastimo 40mm radial PVC rubbing fender profile P66202. Features 40mm Profile Sold singularly Colour White Top Cap / Join Cover