Plastic replacement Bhaia mast heel. This part is also known as the 'Laser Bahia Mast Foot', not to be confused with the Laser Bahia Mast Step.

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction, riveted to the cross beam, used to pin the mast foot to the cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts Specifications Weight: 1 kg Dimension: 120 × 5 × 4 cm

The replacement sheave to suit the mast head on all Laser and Bahia sailing boats. The Laser Sheave is made from nylon plastic and fits onto the top of the mast with a clevis pin 3/16" x 1" (sold separately). Specification Material: Nylon plastic

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats. Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until it's put under...

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder, see code LS-8513.  Specification Length: 710 mm

The Laser Tiller without extension for the Bug and Pico Sailboats comes with a cleat and attachment fitting to connect the flexible joint from the tiller extension. Suits Laser Pico and Laser Bug. Laser Pico tiller arm, which also fits the Laser Bug...

The Laser Pico has a simple downhaul system equipped with a self-releasing cleat for when you run a ground.

The official replacement Laser Rudder Head with aluminum tiller for the Laser Pico or Bug Sailboats is supplied without the rudder, tiller, or tiller extension. For a full rudder with tiller kit, see code LS-8513. This rudder head is the new style...

Laser Pico / Bug and Fusion Rudder Assembly with Blade, Head, Tiller & Tiller Extension Specification Material: Aluminium

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs, top and bottom. Aluminium rudder blade for the Laser Bug and Laser Pico, which comes complete with the plastic top and...

The Laser Gudgeon fits the Laser Pico and Funboat sail craft, constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold separately and comes complete with a spacer and rudder retention spring clip...

Replacement Rudder Retaining Clip for the Laser Pico range of sailboats. Fits on the gudgeon bracket on the transom of the dinghy to secure the rudder when in position. Specification Material: Stainless steel

Talamex Drop Nosed Pins are manufactured from high-quality AISI 316 marine-grade stainless steel for excellent strength and corrosion resistance. Designed for reliable fastening in marine environments, they are available in a wide range of diameters and...

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

Direct replacement for the Laser Bug and Pico Daggerboard, constructed from aluminium. Official Foil from Laser Sailboats. Comes with end plugs and a bottom. In recent years, the Laser Pico and Laser Bug daggerboards have been made tougher so they will...

High quality HOLT padded centre toestrap to suit RS Pico and Laser Pico. Replaces Laser Performance part no 83112 This is the longer of the Laser Pico padded hiking straps which is fitted to the middle of the boat for the helm. The holes at each end of...

Genuine RS Laser Pico Toe Straps with padding both sides. Fitted in three positions on an RS Laser Pico: Two either side of the main hiking strap and the third in the crew forward position. Sold singularly Mounting screws sold separately M5 X 2 mm pan...

The official Laser Daggerboard Plate replacement fits Laser Pico's only. Made from black plastic, positioned above the shim, and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold separately. Specifications Material:...

The RS Pico Slot Strip for the underside of the daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into the cockpit. It keeps the daggerboard casing closed so...

Laser Performance Pico Race Sail Batten Set.

RS Pico / Laser Pico  5.14 m² new design main sail blue and white panels made from Dacron Specifications Colour: Blue/White With a Sail Bag Weight: 2.1 kg Dimension: 80 × 27 × 10 cm

RS Pico 1.09 m² rolled job in blue and white made from Dacron, including sail bag. Specifications Colour: Blue Weight: 1.5 kg Dimensions: 60 × 20 × 20 cm

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

The Mast Sleeve to suit the Laser Pico is fitted using 3/16" x 5/8" rivets (not included). The Pico Lower Mast Collar attaches to the mast and holds the boom in place. A rivet is used to hold the Pico Lower Mast Collar in Place...

Mast step plate, black plastic, with a large hole to take the mast foot, and 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

The Laser Pico Gooseneck is the plastic  U-shaped fitting that attaches the mast to the boom while allowing it to swing freely. Comes with a U-shaped clamp and boom insert.  The Pico Gooseneck attaches the boom to the mast via a simple clipping...

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

RS Pico webbing loop to fit Pico Boom with stainless rivet.  

Replacement Pico Boom with cleat, outhaul, and boom block. Official Pico parts are constructed from aluminium. Specification Material: Aluminium

OEM supplied for the following Dinghies and Users Laser Pico Clamcleat for boom outhaul   The Clamcleat side entry CL218 fairlead allows ropes to be hooked in for cleating, yet easily removed. Ideal as a reaching hook. This cleat is ideal for...

The Laser Pico Vang Plate for the boom has two attachment holes (3/16" x 1/2" rivets sold separately) and a flat base.  For a full Laser Pico Vang kit, see code: LS-90507. Pico kicker vang boom plate. Specification Material: Stainless steel

Eye Plate to attach the vang system to the mast on the Laser Pico. The Vang Mast Plate features three attachment holes (3/16" x 1/2" rivets sold separately) and a curved base designed to fit the Pico Mast. Specification Material: Stainless steel

Laser Road Base Trailer for galvanized stacking style, launching trollies - Suits ILCA, Laser & Laser Pico sailboats. Includes the lightboard, cable, and plug fitting and  complies with European Specification 793 Features Suits ILCA, Laser, and...

Fully detachable hiking bench for the Laser/ILCA, with adjustable hiking strap. 2 padded supports. Perfect for that extra training session. Convenient, portable, and quick to assemble due to the quick-link detachable joint design. This product is...

Sowester ILCA Laser Stacking Launching Trolley. Manufactured in high-grade stainless steel, making them lightweight and easy to handle, and entirely clean and corrosion-resistant. The trolley is designed to fit and lock into the standard ILCA Laser road...

This is one of the most popular launching trollies for Laser or ILCA Class Sailing Dinghies - Manufactured in galvanized steel, this trolley is robust and able to take a battering from multiple launches. It is designed to quickly and securely connect to...

The 10" Road wheel for the Dart 16 road base. A must if you are doing a lot of towing. Specification Diameter: 10"

The 8" road wheel fits the Laser, Pico, Vago, Bahia and Funboat road bases. A must if you are doing a lot of towing. Specification Diameter: 8"

ILCA 7 Mk11 Batten Set, approved by ILCA for all class events. ILCA 7 Batten set complete with all 3 battens and end caps. This set is suitable for the MK2 sails.