Ensure your Jabsco pump maintains peak performance with the Jabsco Service Kit Flat Drive SK279-01. Specifically designed for Jabsco flat drive pumps, this comprehensive service kit includes essential components for routine maintenance and repairs. The...

The Jabsco 21966 is an authentic OEM replacement drive end shaft designed for select Jabsco flexible impeller marine pumps, particularly those in the 21960 series (such as models 21960-200, 21960-210, 21960-221, and similar UK-origin "080" size...

Replacement Jabsco Motor 24v for units 21950-1903 & 21950-1703

The Jabsco Maxi Puppy Motor Assembly 12V SP8012-0159 is a high-performance replacement motor designed for Jabsco Maxi Puppy 3000 series pumps, including models like the 23610-3003. Engineered for reliability, this 12V DC motor ensures consistent...

The Jabsco Stainless Steel Accumulator Tank can hold 24 litres of cold water for use with showers and other outlets. It reduces strain on the plumbing system by holding water and then expelling it when needed. Features Reduces pressure on water...

Jabsco 1" Bronze Clutch Pumps are powerful engine-driven units. These tough and fully serviceable belt-driven pumps will self-prime rapidly and work continuously over a wide engine speed range. Installed in innumerable fishing boats and other workboats...

Description The Jabsco Quiet Flush Electric Toilet was designed to reduce noise levels when flushing. A three-way switch allows operation of the flush pump, the discharge pump or both, allowing the water level to be adjusted for user comfort. These...

Description The Jabsco Quiet Flush Electric Toilet was designed to reduce noise levels when flushing. A three-way switch allows operation of the flush pump, the discharge pump or both, allowing the water level to be adjusted for user comfort. These...

Jabsco Utility 40' 1" Self-Priming Flexible Impeller Pump Features Built-in dry-running protection for up to 30 minutes after initial prime Rapid self-priming from dry up to 2m Will handle hard or soft solids Corrosion-resistant bronze body, stainless...

Description From crowded charter boats to racing yachts and everything in between, the Jabsco Quiet Flush E2 electric marine toilet has been designed to solve some of the biggest marine waste challenges facing boat owners and manufacturers. With its...

Description Isotherm Ice Cube Trays - 2 Per Pack. Features Fits the Isotherm Cruise Fridges Made from stainless steel

Description The Isotherm Cruise 100 Fridge Retainer is a spare part designed for the CR100 refrigerator door. This direct replacement is a stainless steel bar that fits onto the fridge door bottom storage compartment. This retainer ensures secure storage...

Description The Isotherm SGC00028AA Drip Tray fits the Isotherm Cruise 80, Cruise 100 and Cruise 120 Fridge models. This high-quality drip tray effectively collects and manages condensation, ensuring your refrigeration system remains clean and dry...

Description The Isotherm Fridge Shelf part number SGC0009AA, is crafted to improve the storage capacity and accessibility within your Cruise 65 marine fridge. Specifications Model Compatibility: Perfectly fits the Isotherm Cruise 65...

Description 2-piece installation frame for your Isotherm Cruise 85 Fridge. Specifications Isotherm part no: SGB00029AA Length: 62 cm Width: 3.5 cm

Description The Isotherm Cruise 130 Fridge O-Evaporator Mount Kit is designed specifically for securing O-Evaporators. Provides everything you need to mount an O-Evaporator in your Cruise 130 Marine Fridge. Features Includes all necessary parts for a...

Description Introducing the Isotherm 2 Side Frame Black CR85, designed for those who value both functionality and aesthetics in their marine refrigeration solutions. This frame is specifically crafted for the Isotherm CR85 refrigerator model, enhancing...

Description Isotherm Cruise 80/100 Fridge Shelf Rod SGC00073AA is a direct replacement for the middle bar on the fridge door. Specifications Fits models: Cruise 80, Cruise 100 Dimensions: 70 cm (Length) x 2 cm (Diameter) Weight: 0.5 kg (1.1...

Description Ensure the safety and longevity of your marine water heating system with the Isotemp Over Heat Thermostatic SEA00042LA, specifically designed for Isotemp Basic and Slim B water heaters. This thermostatic is an essential component that...

Freezer Door Replacement, part number SGC00459AA. Specifically designed for the Freeline 115, this door ensures efficient cooling performance by protecting the evaporator and maintaining the integrity of your refrigeration system. Features Model...

Isotherm Cruise Fridge Door Handle SGD00008AA. Specifications Model: XYZ123 Color: Black Weight: 38 kg

Description Isotherm Cruise 65 Fridge Mounting Frame S/S SGB00145AA in the 3 sided version. Specification Part no: SGB00145AA

Description Enhance the appearance and functionality of your Isotherm CR42 fridge with the Isotherm 3-Side Black Frame. This meticulously designed frame is the perfect accessory for those looking to achieve a clean, professional look in their marine or...

Description A replacement Isotherm Fridge Thermostat for the Cruise 42 and B140 models. Specification Part no: SEA00020DA

Description The Isotherm Evaporator CR85/130L G159 is a high-quality replacement evaporator designed for specific Isotherm refrigeration systems. This essential component plays a crucial role in maintaining optimal cooling performance. Features Precise...

The Isotherm SDF00030AA is a genuine replacement door seal for Cruise CR36 and BI135 refrigerators. This flexible gasket ensures a tight, reliable seal around the refrigerator door, preventing cold air loss and...

Description This genuine Isotherm Fridge Evaporator Door is designed to replace the original door on your Cruise 80, 100, or 120L refrigerator. It's a crucial component that helps maintain optimal temperature and energy efficiency. Specification Part...

The Isotherm Mounting 3 Side Frame Black - CR90FR/CR130 (part reference SGB00082AA or similar variants like SGB00083AA) is a premium, purpose-built flush-mount installation frame designed for seamless integration of Isotherm's popular Cruise series...

Description Ensure a tight seal and optimal performance of your Isotemp water heater with this genuine replacement gasket. Specifications Suits water heater models: Slim, Basic and Spa Isotemp part no: SDF00025AA  

The Isotherm Replacement Door Stop CR120 is a genuine OEM spare part designed to restore smooth, reliable operation to your Isotherm Cruise CR120 marine refrigerator. This small but essential component prevents the door from opening too far, protects...

The Isotherm ASU Fridge Control Panel 12/24V is a key component for managing your Isotherm refrigeration system. Features Intuitive Control: User-friendly interface for easy operation Energy Efficiency: Optimizes energy consumption Durable Construction:...

Restore perfect performance and insulation to your marine refrigerator's freezer compartment with the genuine Isotherm Evaporator Door, part number SGC00021AA.This high-quality OEM evaporator/freezer door is specifically designed as a direct replacement...

Restore secure, reliable storage in your Isotherm refrigerator with these genuine OEM attaching clips (Part # SGC00082AA). Designed specifically for the Isotherm CR100 (and compatible with select Cruise series models), these durable white plastic clips...

Description Elevate the style and integration of your Isotherm CR65 fridge with the Isotherm 3 Side Frame in Black. This frame is the ultimate accessory for those who demand both functionality and aesthetics in their marine or RV living spaces. Also...

Elevate the aesthetic of your marine or RV living space with the Isotherm Teak Doorfront for the CR130 Fridge. This doorfront transforms your refrigerator into a statement piece, combining the natural beauty of teak with the functionality and durability...

Description The Isotherm 3 Side Installation Frame Black fits the CR42 and CR49 fridges. A frame covers the cutout edges where the fridge is installed, giving a cleaner and more finished look. It can hide rough cuts in the bulkhead or cabinetry, ensuring...

Transform your icebox into a high-performance fridge or freezer with the Isotherm Flat Evaporator Plate, designed for maximum efficiency in confined spaces. This particular model, measuring 1000mm x 270mm, is perfect for larger refrigeration needs,...

The Isotemp SPA 25L Water Heater is the epitome of marine-grade hot water systems, offering both reliability and efficiency for boat owners. With a capacity of 6.5 gallons (25 litre), this heater is tailored for marine environments where space and...

Description Discover the versatility and efficiency of the Isotherm Refrigeration Unit GE80, designed to convert any suitable space into a reliable fridge or freezer. This unit is perfect for marine, RV, or off-grid living where space and efficiency are...

Experience the luxury of hot water on demand with the Isotemp SPA 40L , 25 L. 50L Water Heater, designed for marine, RV, and small home applications where space and efficiency are critical. This water heater brings comfort and convenience to your travels...