Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 1/4" (6...

Race once with the windward sheeting traveler car and you’ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...

High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin ball bearings let cars instantly adjust and release under load. Delrin is a registered...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Mainsheet block pin diameter: 1/4" (6 mm) Control block pin diameter: 5/32" (4 mm) Maximum working load: 1250 lb (567...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track...

Black Magic air blocks are a top favorite of Big Boat performance racers and cruisers. These lightweight, free-running, powerful performers are used for sail controls that see lots of action: mainsheet, runner, halyard, and spinnaker systems. A center...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Specifications Material: Torlon Diameter: 3/16" (5 mm) Quantity: 20

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Specifications Sheave diameter: 1 1/2" (38 mm) Shackle pin diameter: 1/4" (6 mm) Maximum wire diameter: 1/8" (3 mm) Maximum line diameter:...

Harken Soft-Attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size...

Perfect solution for fastening applications, stays, blocks, jib tack point, lifelines, tether etc. High quality, drop forged stainless steel  with outstanding work and break loads . They feature a modern and optimized design to suit aesthetics of...

Folding Padeyes keep your deck and passageways clear. They’re ready when you need to attach a snatch block or fender, but fold safely out of the way when you don’t. Specifications Maximum working load: 3080 lb (1400 kg) Breaking load: 6160...

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Specifications Sheave diameter: 1" (25 mm) Shackle pin diameter: 3/16" (5 mm) Maximum wire diameter: 3/32" (2 mm) Maximum line diameter:...

Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/4" (32 mm) Length: 2 9/16" (65 mm) Width: 1 1/4" (32 mm) Weight: 0.5 oz. (14 g)

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/16" (27 mm) Length: 2...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1" (24 mm) Length: 2 9/16"...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 3/4" (19 mm) Length: 1 7/8"...

Low-friction micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications Sheave diameter: 7/8" (22 mm) Shackle pin diameter: 5/32" (4 mm) Maximum line...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Maximum working load: 310 lb (140 kg) Breaking load: 1500 lb (680 kg) Car body height: 3/4" (19 mm) Length: 3 7/16" (87 mm)...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 2...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 2...

Low-friction Bullet Blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Specifications Sheave...

Use 285 to ease genoas over lifelines or past shroudsand to help large roach mainsails clear backstays. Diameter: 2 3/4" (70 mm) Technical File Instruction Manual

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2 15/16" (75 mm) Shackle pin diameter: 1/4" (6 mm) Maximum line diameter: 7/16" (12 mm) Maximum working...

Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 2 1/16" (52 mm) Fits cam: 280 Length: 3 3/8" (85 mm) Width: 1 1/2" (38...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic line, these small, compact blocks have very high working loads for safe, easy trimming. The 40 mm fiddle is an excellent choice...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic line, these small, compact blocks have very high working loads for safe, easy trimming. The 40 mm fiddle is an excellent choice...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

When end controls are not used, add endstops to absorb shock loads. Specifications Fasteners: 5 mm (#10 FH inch) Use with track/rail: 2721, 2725, 374 Technical File Installation Sheet

The carbo Ratchamatic is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. Use the 2634 with a 402 or 403...

The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Specifications Minimum line diameter: 1/8" (3 mm) Maximum line diameter: 3/8" (10 mm) Fastener spacing: 1 1/32" (26 mm)...