Topcoat or Flowcoat has a consistency between that of gelcoat and of resin but has a wax additive content to ensure a tack free surface when fully cured. Its is used as a final coat on GRP laminate and gives a finish similar to a paint...

The Lanotec Citra Force Cleaner 750ml was originally developed to remove lanolin grease but has become popular as a eco friendly marine degreaser for oils, much and general stains. Features All natural substitute to harsh chemical cleaners Heavy Duty...

Magma Bbq Covers are designed specifically to fit any party size Magma Marine Kettle® grill. Constructed from breathable solution dyed acrylic fabric that is water and fade resistant. The material is guaranteed with a 5 year warranty that covers the...

The Magic Marine Rib Engine Cover is made from stretch fabric to fit nearly all outboard engines for RIB's and small boats. Includes a transparent window each side for you to add your country letters. There is an elastic cord adjuster along bottom edge...

Official replacement part for the Lofrans Windlasses, the Lofrans Windlass Bearing 537 fits the Porgress 2 and Leopard models. Feature Suits the Lofrans Progress 2 and Leopard series of Windlasses    

Lofrans Titan Windlass Spacer #653 Feature Suits the Lofrans Titan Windlass

Features Replacement part for the Lofrans Titan Windlass 4" diameter

The Lofrans Falkon Windlass Washer #434 fits the bolt that secures the cap that fits onto the chain gypsy. Feature Suits the Falcon Windlass Parts Diagram The Lofrans Falkon Windlass Washer is shown under part no: 434 below:  

Replacement Washer for the Lofrans Falkon Windlass. Fits onto the bolt securing the rope drum. Lofrans part no: 390

  Features Suits the Lofrans Titan

Features Suits the Titan Windlass Parts Diagram The Lofrans Titan Bearing 51108 #632A is listed under part no: 632 below:

  Features Suits the Lofrans Titan Windlass

Feature Suits the Lofrans Titan Windlasses

Stainless steel spring used in Lofrans Windlasses. Feature Suitable for the Lofrans Tigre, Titan, Cayman, Falcon Windlasses from Lofrans

Lofrans Bearing Ring Im1520164 #348 Feature Suits the Lofrans Tigres, Titan and Falkon windlasses

Feature Suits the Lofran Titan

Lofrans Cone Clutch Tigres 318B 10mm.    

Replacement spare part for the Lofrans Titan Windlass.

Lofrans Falkon Bush Nylon 437C also under 437A.

Lofrans Falkon Windlass Stripper 467

Lofrans Falkon Cone Clutch #436 Features Made from stainless steel Supports the gear on your windlass

Official replacement part for the Lofrans Falkon Windlass, the Clutch Nut Falkon Chrome part no: 435 is chrome finish.

Replacement part to fit the Lofrans Falkon Windlass Drum Upper Part. Feature Material Chrome plated bronze Parts Diagram Falkon Windlass Drum fits part no: 839A as per below:

Lofrans Falkon Windlass Chain Pipe 469 is a thru deck fitting that guides the chain onto the gypsy. Feature Ensures the smooth movement of the chain from and to the chain locker

Lofrans Falkon Windlass Drum Bottom Section 840 comes in two parts (upper section sold seperately). Specification Material: Chrome plated bronze

The Lofrans X2/ Project 1000 Gipsy engages 8mm chain for use with vertical windlasses. Specifications Chain diameter: 8 mm ISO 4565 / DIN 766 Material: Stainless steel Suits: Lorans X2 or Project 1000 Windlasses

The Lofrans X1 DC Replacement Motor in 12V for 500W windlasses. Feature Official replacement motor for the Lofrans X1 Windlass Specifications power supply: 12V  Pole diameter: M5 Screw hole diameter: M4 Drive shaft diameter: 11 mm Drive shaft...

Lofrans Project X2 Replacement Motor comes in 1000 watt for 24 volt power supply. Features Direct replacement for the X2 Lofrans Windlass Waterproof IP56 High power 1000 Watt motor Specifications For Lofrans Airon, Kobra, Progress 1 ( Also X1,...

The Lofrans SX2 Vertical Windlasses are suitable for sail and motor boats from 6m to 27m in length. Includes Dual direction solenoid pack Rope drum Handle Gypsy for chain CD / Instruction manual Features Compact round base design Marine AISI 316L...

45 gram replacement gas cylinder for Gas Inflation Life Jackets. Generally suits 220N Lifejackets but very important to check the correct size before fitting.  Size of Cylinder is normally printed on bladder or the label of jacket.

The Lewmar Size 00 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage. Navy colour Size 00  

The Lewmar 30-48 Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 48ST Lewmar part no: 45000029 Part Diagram The diagram below shows the Lewmar 30ST...

The Lewmar 24-40ST Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 24ST - 40ST Lewmar part no: 15000378 Part Diagram The diagram below shows the Lewmar...

The Lewmar 16ST Stripper Ring Replacement Kit is a direct official replacement part for the Lewmar 16ST Windlasses. Parts Diagram The Lewmar 16ST Stripper Ring Replacement Kit is part 7 from the diagram below:  

The Lewmar Small Cam Fairleads can be fitted using screws from the exisiting camcleat and help retain the line when not jammed in the cleat. Features Black Nylon Easily installed on existing small camcleats from Lewmar Max 8mm Line

The Lewmar 30-40ST Gear Spindle Replacement is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 40ST Lewmar part no: 48000506 Part Diagram The diagram below shows the...

The Lewmar Size 2 Ball Loader come with White Screws and allows you to take off the cars on your Lewmar Size Track without the ball bearings escaping.

The Lewmar Size 2 Ball Loader come with White Screws and allows you to take off the cars on your Lewmar Size Track without the ball bearings escaping.

Made from state-of-the-art materials developed by the automotive industry and refined for the marine market, Lewmar cleats enhance performance in durability, strength and lubrication. Features Low line entry load High holding load Constant tension...

Lewmar 30ST-56ST Winch Top Cap Replacement Kit is an official spare part from Lewmar for use on their sailing winches. Features High strength black nylon. Suits Lewmar 30ST - 56ST winches; older models with 4 hole top