The Lofrans Falkon Windlass Washer #434 fits the bolt that secures the cap that fits onto the chain gypsy. Feature Suits the Falcon Windlass Parts Diagram The Lofrans Falkon Windlass Washer is shown under part no: 434 below:  

Replacement Washer for the Lofrans Falkon Windlass. Fits onto the bolt securing the rope drum. Lofrans part no: 390

  Features Suits the Lofrans Titan

Features Suits the Titan Windlass Parts Diagram The Lofrans Titan Bearing 51108 #632A is listed under part no: 632 below:

  Features Suits the Lofrans Titan Windlass

Feature Suits the Lofrans Titan Windlasses

Stainless steel spring used in Lofrans Windlasses. Feature Suitable for the Lofrans Tigre, Titan, Cayman, Falcon Windlasses from Lofrans

Lofrans Bearing Ring Im1520164 #348 Feature Suits the Lofrans Tigres, Titan and Falkon windlasses

Feature Suits the Lofran Titan

Lofrans Cone Clutch Tigres 318B 10mm.    

Replacement spare part for the Lofrans Titan Windlass.

Lofrans Falkon Bush Nylon 437C also under 437A.

Lofrans Falkon Windlass Stripper 467

Lofrans Falkon Cone Clutch #436 Features Made from stainless steel Supports the gear on your windlass

Official replacement part for the Lofrans Falkon Windlass, the Clutch Nut Falkon Chrome part no: 435 is chrome finish.

Replacement part to fit the Lofrans Falkon Windlass Drum Upper Part. Feature Material Chrome plated bronze Parts Diagram Falkon Windlass Drum fits part no: 839A as per below:

Lofrans Falkon Windlass Chain Pipe 469 is a thru deck fitting that guides the chain onto the gypsy. Feature Ensures the smooth movement of the chain from and to the chain locker

Lofrans Falkon Windlass Drum Bottom Section 840 comes in two parts (upper section sold seperately). Specification Material: Chrome plated bronze

The Lofrans X2/ Project 1000 Gipsy engages 8mm chain for use with vertical windlasses. Specifications Chain diameter: 8 mm ISO 4565 / DIN 766 Material: Stainless steel Suits: Lorans X2 or Project 1000 Windlasses

Lofrans Project X2 Replacement Motor comes in 1000 watt for 24 volt power supply. Features Direct replacement for the X2 Lofrans Windlass Waterproof IP56 High power 1000 Watt motor Specifications For Lofrans Airon, Kobra, Progress 1 ( Also X1,...

The Lofrans SX2 Vertical Windlasses are suitable for sail and motor boats from 6m to 27m in length. Includes Dual direction solenoid pack Rope drum Handle Gypsy for chain CD / Instruction manual Features Compact round base design Marine AISI 316L...

45 gram replacement gas cylinder for Gas Inflation Life Jackets. Generally suits 220N Lifejackets but very important to check the correct size before fitting.  Size of Cylinder is normally printed on bladder or the label of jacket.

The Lewmar Size 00 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 0

The Lewmar 30-48 Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 48ST Lewmar part no: 45000029 Part Diagram The diagram below shows the Lewmar 30ST...

The Lewmar 24-40ST Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 24ST - 40ST Lewmar part no: 15000378 Part Diagram The diagram below shows the Lewmar...

The Lewmar 16ST Stripper Ring Replacement Kit is a direct official replacement part for the Lewmar 16ST Windlasses. Parts Diagram The Lewmar 16ST Stripper Ring Replacement Kit is part 7 from the diagram below:  

The Lewmar 30-40ST Gear Spindle Replacement is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 40ST Lewmar part no: 48000506 Part Diagram The diagram below shows the...

The Lewmar 15ST - 70ST Winch Collet Replacements are an official spare part for the Lewmar Windlasses range from 15ST EVO series to 70ST EVO series. Come sold as pair Part Diagram The Collets are shown in the image below as part no. 3.

The Lewmar Size 2 Ball Loader comes with White Screws and allows you to take off the cars on your Lewmar Size Track without the ball bearings escaping. Specification Product Type: Spares  

Lewmar 30ST-56ST Winch Top Cap Replacement Kit is an official spare part from Lewmar for use on their sailing winches. Features High-strength black nylon Suits Lewmar 30ST - 56ST winches older models with 4-hole top Download Datasheet ...

Lewmar Traveller Car Size 1 End Caps sold as a pair with screws included. Features Official replacement part from Lewmar Comes with 4 x installation screws Lewmar Size 1 Traveller Car

Ideal for use with hand-held loads, Lewmar's control Blocks feature lightweight, performance load-bearing capacity. MRT(Metal Replacement Technology) and a stainless steel central race and balls provide a weight advantage, while Long Fibre Technology...

The Lewmar Small Hatch Handle Kit fits the Lewmar Flush, Low Profile and Coastline Hatches. Installation screw included. Features Suits the Coastline, Flush or Low Profile Hatches Small left handle in grey

Lewmar Standard Portlight Handle Kit to fit the following portlights: Standard portlight, sizes 0, 1, 1RE, 2, 3, 4, 4L, 4R, 5 & 7RE Standard portlight - Bavaria models: barrel, double barrel, long port, mitred port aft, mitred port fwd, mitred stbd...

Lewmar Size 1 Ocean Car Buffer Kit has replacement end caps for the Ocean series of Lewmar Travellers. Comes with screws and everything needed to replace the old unit's buffers.

The Lewmar 50mm Synchro Blocks are engineered for speed, efficiency, and superior handling. We use a combination of scientifically optimised block geometry, a Free-Spin bearing, and a self-aligning head to reduce friction and increase efficiency by up...

The Lewmar 34ST/40ST Winch Drum Bearing Kit are an official replacement part for Lewmar Winches: 34-40 series. Parts Diagram The Lewmar 34ST/40ST Drum Bearings are shown as part no. 9 below:  

The Lewmar 30mm Single Block Max Line 8mm is ideal for use with hand-held loads. Lewmar’s Control Blocks feature lightweight, performance load-bearing capacity. MRT (Metal Replacement Technology) and a stainless steel central race and balls...

The Lewmar Size 70 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 70

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 18 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 18 Hatches Lewmar part no: 360875999