ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This goodeneck also suits Laser Performance models in Standard, Radial and 4.7 rigs Specifications Material: Stainless steel Fasteners 6 x M4.8 x 12mm Stainless Steel Rivets -...

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

ILCA Laser Boom Plug - Inboard end to fit  boom to lower mast via gooseneck fitting. Use a 12mm x  Specifications Material: Plastic

Lower mast, base plug used on the ILCA6, Laser Radial, Funboat and Pico lower mast, includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...

ILCA Laser Boom with Harken ball bearing blocks. Official ILCA approved for all ILCA events and suitlable for all Rigs- ILCA 4, ILCA 6, ILCA 7. Features Harken Boom End and  Centre MainsheetsBlocks fitted Official ILCA approved Suits All modesl...

Plug black plastic fits on the top of the top mast fixed with rivets x 2 (sold seperately).Can also be used as Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

Anodized aluminium tube with end plugs and sleeve fitted. A direct replacement for the top mast that comes on your Laser 4.7, Radial or Standard rig. Suits all types of Laser sailing boat. The Laser Top Mast is too long for a regular courier so there is...

The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similiar sealant to keep the hull watertight.

Laser Toe Strap Padded in grey with XD logo. Internal plastic stiffener stops the Laser Toe Strap from turning over, heat sealed screw holes for easy fit.

Holt Laser Grab Rail fit all Laser Performance and ILCA Dinghies  - Two required per boat - It is recommended to use a sealant, such as Sikaflex 291i to bed screws  Accessories Sikaflex 291i Sealant - Click here  

Official ILCA approved Nautos self-bailer ( Autobailer)  - Suits all models ILCA and Laser

Standard Bow eye fairlead for all Laser and ILCA rig sail boats

ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low  How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

Laser Rudders Gudgeons by Holt - 2 Required per boat  Fasteners 2 x Sowester Pan Head Self Tappers per Gudgeon - Size  8 x 1 1/2"  Select size here

Genuine ILCA Rudder Gudgeon asteners 4 x Sowester Pan Head Self Tappers per Gudgeon - Size  8 x 1 1/2"  Select size here

This ILCA / Laser tiller retaining pin secures the tiller to the rudder head. Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmlypressed into the head before drilling the location hole to ensure solid fit

The Laser rudder head is a aluminium construction complete with a rudder ring and tilller retaining pin. Rudder fittings are stainless steal for long lasting, please make sure you rudder head has the approve sticker for eventing. Comes with rudder...

High quality carbon tiller extension from Holt 23mm dia. x 120cm, including flexible tiller joint ideal for ILCA all rig Features ILCA and Laser approved Carbon fibre  Comes with tiller joint

Older style articulated stainless steel tiller joint for smaller sailing dinghies

High quality, reliable RWO OmniflexTiller Joint to suit most dinghy tiller extension, including ILCA Laser, Topper, and many others. This Omniflex joint is made from Elastomeric polymer which allows all directional flexability. The fitting includes a...

The ILCA Mega Bolt is the pivot bolt to fit the Rudder Head to the Rudders Plade - Supplied with 20mm Washers 

The Laser XD rudder head pivot bolt is an upgraded large diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.

Official ILCA fused rudder blade only - Suits all Rigs and Class legal for all ILCA events. Note Also suits Laser (Torch logo) Sailboats.

Laser shock cord retainer with plastic clip keeps dagger board in place. Specifications Colour: Black Length: 7 mm

Laser Performance Daggerboard Infused.

This Harken T2 Double Block is used as a replacement for the Laser Vang but can used with many different applications for dinghy sailing. The Harken 18 mm T2 Block is used in dinghy applications including the direct replacement for the Laser Vang Double...

Laser XD Vang Kicker Top Harken Block is plain bearing stainless steel body, kicker key is not supplied.

The Laser Curved Kicker Key fits onto the kicker/vang system and slots into the boom.

ILCA Laser XD Harken high performance vang base pulley unit - Fully ILCA Class legal and also compatible to all Laser Rigs, 4.7, Radial & Full Rig Features ILCA Class Legal Clevis pins included for attachment and...

Low-friction Carbo Air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter:...

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and requires 2 x Laser XD Harken 16 mm Air Block...

ILCA Harken XD Outhaul & Downhaul Deck Ceat with Harken Double Jammer. Suits all models ILCA & Laser - Official branded ILCA product. Fasteners 2x A4 Stainless 10 x 1 1/2" self tappers Use sealant in when installing.

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material: Dyneema Colour: Blue Pre-cut diameter: 4 mm Length: 1.3...

Standard length ILCA Laser XD Secondary Line Downhaul made from Marlow Excel Control Line giving perfect control with low stretch and smooth tension and release movements. For 6:1 system. Features Smooth cover giving low friction through the...

This ILCA Laser Outhaul / Vang secondary line is made from 4mm Marlow Excel Control rope and provides excellent strength, flexiiblity and strength. Ready to go and cut to the required length of 4.95 mts, Usage Use as Secondary Vang Line for all rigs in...

Laser Outhaul Control Line Pre-cut 4 mm x 4.8 m made from high quality Marlow Excel Control. Features Precision control and release Smooth cover giving low friction through the sheaves Firm construction allows precise grip in the jam cleat Durable...

The Laser Block Ratchet Spring is to hold your ratchet upright, the spring is heavy duty. Replacement stainless steel spring to suit stand up blocks such as the Laser Harken 57 mm Carbo Rachet Block (LS-91333). Specifications Size: Large

Harken Carbo Ratchet Blocks allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Harken 57 mm Blocks feature Cam-Lock or U-Lock locking systems to lock the shackle in front or side positions, or swivel to...

Harken ILCA Laser complete mainsheet block set includes stainless steel rivets - Official ILCA class approved , this block set uses ILCA exclusive Harken bearing blocks and will fit any Laser or ILCA class dinghy. Features Enhanced performance and...