Attach eyelets to your boat cover or any other fabric with the 11.11mm Brass Eyelet Kits. Kit includes the punch and die for cutting the hole and then installing the eyelet. Brass eyelet kit includes punch and diePack 25 eyelets with tools.

Self-adhesive encapsulated Kevlar tape for repair to Kevlar and high-performance sails.

Transparent and ideal for repairing windows and mylar sails.  Features Self adhesive Weatherproof and waterproof

Heavy duty self-adhesive polyamide tape for semi-permanent sail repair. Features Weather and water-resistant Colour: white

Waxed polyester twine. Features Size: 5mm x 1m spool Available in white only

Traditional sailmaker's sewing palm. Specifications Weight: 0.05 kg Height: 65.0 mm Width: 53.0 mm Length: 30.0 mm Volume: 30.45 cm Unit type: N

Useful "get-you-out-of-trouble" sail repair kit including sewing palm, pack of needles, sail thread and rip-stop tape.

Barton Towable Car End with a functional bracket placed on top. Barton Genoa Cars and specialist sliders designed to run on 25mm (1") T track. Specifications Barton Car No: 25221  Type: Track End Car with Becket  Length: 88mm  Width:...

These 5mm Barton Screws feature a die-cast plastic Knob that affords and easy way of tightening or loosening.

Barton Sliding Loop for 32mm 'T' track features a heavy duty stainless steel attachment loop and through-bolted and riveted for extra strength.

Spinlock RF/MA Main Sail Feeders give a smooth and fast sail hoist with no hand feeding. The RF/MA is located in the mast track below the luff entry and protects the luff during the hoist. No drilling is needed to fix the Feeder in its...

The Spinlock Headsail feeder RF/H guides any flaked genoa from the deck cleanly up into the foil and guarantees a smooth, fast sail hoist with no hand feeding. Supplied with a length of line for attachment in the correct free pivoting position between...

Barton High load fixing strop or 'Tweeker' is designed to be spliced into 16mm rope. Ergonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodising and the profile of the curved surfaces, these have been developed to...

Barton low-friction eyes are manufactured in marine-grade aluminium and finished in a unique hard ‘Spectro’ grey anodising. These lightweight high-load rings are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast...

Stainless steel Mast Step These low-profile, lightweight hinged mast steps are manufactured in bright, polished stainless steel Each step has a secure and positive hinged action and is rattle-free The foot area has a toothed non-slip surface and the...

This product has won many top design awards and is truly innovative.Keep one onboard for an emergency - It will repair all manner of tears and leaks in Inflatable Boats, RIB, or any Inflatable item. The system works by using two half-shells that screw...

Spinlock T-Series organisers lead multiple lines back from the mast to XAS or XTS/XCS powerclutches. Features Minimal overall length Efficient bearing Reduces winch effort and increases halyard life Modular end fairings for safe sideloading Asymmetric...

Spinlock T-Series organisers lead multiple lines back from the mast to XAS or XTS/XCS powerclutches. Features Minimal overall length Efficient bearing Reduces winch effort and increases halyard life Modular end fairings for safe sideloading Asymmetric...

Spinlock T-Series organisers lead multiple lines back from the mast to XAS or XTS/XCS powerclutches. Features Minimal overall length Efficient bearing Reduces winch effort and increases halyard life Modular end fairings for safe sideloading Asymmetric...

New slimline range of organizers for leading lines to the clutch. Features Modular end fairings for safe side loading Sheave spacing identical to the previous model No base plate needed New profile composite sheaves T38 stacks on...

New slimline range of organisers for leading lines to the clutch. Features Modular end fairings for safe side loading Sheave spacing identical to the previous model No base plate needed New profile composite sheaves T38 stacks on...

New slimline range of organizers for leading lines to the clutch for lines up to 12mm dia. Features Minimal overall length An efficient bearing surface reduces winch effort and increases halyard life Integral end fairings for safe side loading The...

New slimline range of organizers for leading lines to the clutch. Features Minimal overall length An efficient bearing surface reduces winch effort and increases halyard life Integral end fairings for safe side loading The asymmetric version reduces...

New slimline range of organizers for leading lines to the clutch. Features Modular end fairings for safe side loading Sheave spacing identical to the previous model No base plate needed New profile composite sheaves T38 stacks on...

The Barton Size 2 Deck Organiser (4 Sheave) is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with 'Spectro' grey anodised finish. Sheaves are from moulded...

The Barton Size 2 Deck Organiser with 3 Sheaves suits up 14mm lines and is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.  This range features aluminium construction with 'Spectro' grey...

The Barton Size 1 Deck Organiser (4 Sheave) is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with 'Spectro' grey anodised finish. Sheaves are from moulded...

The Barton Size 1 Deck Organiser (3 Sheave) is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with 'Spectro' grey anodised finish. Sheaves are from moulded...

The Barton 2 Sheave, Size 1 Deck Organiser features 32mm Sheaves and is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with 'Spectro' grey anodised finish...

Spinlock PXR Cam Cleat PXR0810-T - Compact roller action cam cleat for easy release and precision of high-performance control lines 8-10mm. This is the Retrofit version for upgrading main sheet swivel cleats and traveller systems on dinghies,...

Spinlock PXR Cam Cleat PXR0206/VP - Vertical Pivot version for 2-6mm lines - Provides a vertically fixed, pivoting sheave and cleat in an ultra compact design This will suit various mounting positions for centrally feeding control lines out to the...

Spinlock PXR Cam Cleat PXR0206-T - Compact roller action cam cleat for easy release and precision of high-performance control lines 2-6mm. This is the Retrofit version for upgrading main sheet swivel cleats and traveller systems on dinghies, keelboats,...

The Spinlock PXR Cam Cleat for 2-6mm line. PXR - Designed for precision control of high-performance lines.The PXR racing cam cleat features a three-stage adjustment spring, allowing users to select the release setting for the application and prevailing...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams for racing where weight is critical, or where adjustments are less frequent. Specifications Height: 1 3/16" (30...

The 093 U-adaptor allows blocks with 3/8" (10 mm) posts to be attached to swivel bases or to other blocks with 3/8" (10 mm) posts. Specifications Shackle pin diameter: 3/16" (5 mm) Weight: 0.48 oz. (13.6 g) A: 1/2" (12 mm) B: 7/16" (11 mm) Maximum...

Pillar fairleads enable the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Stainless steel pillars add strength and wear resistance. `K´ cam bases feature a...

The Barton Maxi  KCamcleat suits ropes from 10mm to 14mm Manufactured from a composite Kevlar/Zytal material to accept lines 10-14mm. This advanced material offers performance advantages over carbon fibre and conventional glass-reinforced...

The Barton Mini Camcleat suits ropes from 8mm to 10mm. Made from high-strength materials. Manufactured from a composite Kevlar/Zytal material to accept lines up to 10mm. This advanced material offers performance advantages over carbon fibre and...

Clamcleat's CL230 Trapeze and Roller holds ropes firmly yet is devoid of any moving parts to break or seize. They are unaffected by the heat generated by a rope surging back through a cleat and are suitable for sub-zero temperatures. The principle of...

The Becket on the Clamcleat® CL211 MK2/S2 holds the end of the rope under the cleat. Rig for 2:1 advantage without the need for an extra fixing. Ideal for Optimist masts and small dinghy halyards. Manufactured from aluminium for a light weight...