Holt Laser Grab Rail fits all Laser Performance and ILCA Dinghies - Two required per boat - It is recommended to use a sealant, such as Sikaflex 291i, to bed screws  Accessories Sikaflex 291i Sealant - Click here  

Official ILCA approved Nautos self-bailer ( Autobailer) - Suits all models ILCA and Laser. Complete autobailer assembly for the ILCA dinghy with bailer plate, chute door, bung, and screw. This is a class legal bailer with ILCA stamp on body of the bailer...

Standard&nbsp Bow eye fairlead for all Laser and ILCA rig sail boats   Acetal open-based and bullseye rope fairleads with or without stainless steel liner. Features Fixing Hole Size: 5mm Dist. Between Fixing: 5mm Weight: 30g

ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low. How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

Laser Rudders Gudgeons by Holt - 2 Required per boat  Fasteners 2 x Sowester Pan Head Self Tappers per Gudgeon - Size  8 x 1 1/2"  Select size here

Replacement gudgeon for the ILCA dinghy and Laser sailboat. Two of these are mounted on the transom of the boat and used for attaching the rudder head. Installs with 4 screws (not included). Sold individually and made from a heavy duty plastic for long...

This ILCA / Laser tiller retaining pin secures the tiller to the rudder head. Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole to ensure solid fit.

Official ILCA Rudder Head comes with rudder megabolt. Suits all models ILCA 4, 6 & 7 and Laser 4.7, Radial and Full Rig.

High quality carbon tiller extension from Holt 23mm dia. x 120cm, including flexible tiller joint ideal for ILCA all rig Features ILCA and Laser approved Carbon fibre  Comes with tiller joint

Older style articulated stainless steel tiller joint for smaller sailing dinghies

High quality, reliable RWO Omniflex Tiller Joint to suit most dinghy tiller extension, including ILCA Laser, Topper, and many others. This Omniflex joint is made from Elastomeric polymer which allows all directional flexibility. The fitting includes a...

The ILCA Mega Bolt is the pivot bolt to fit the Rudder Head to the Rudders Plade - Supplied with 20mm Washers.

The Laser XD rudder head pivot bolt is an upgraded, large-diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.

Official ILCA fused rudder blade only - Suits all Rigs and Class legal for all ILCA events. Features Infused GRP rudder blade - blade only Fits the ILCA rudder head Note Also suits Laser (Torch logo) Sailboats.

Laser Performance Daggerboard Infused.

This Harken T2 Double Block is used as a replacement for the Laser Vang but can used with many different applications for dinghy sailing. The Harken 18 mm T2 Block is used in dinghy applications including the direct replacement for the Laser Vang Double...

Laser XD Vang Kicker Top Harken Block is plain bearing stainless steel body, kicker key is not supplied.

The Laser Curved Kicker Key fits onto the kicker/vang system and slots into the boom. Features New and stronger kicker key (thicker) Connects to the upper boom vang block Official class legal Laser sailboat part

ILCA Laser XD Harken high performance vang base pulley unit - Fully ILCA Class legal and also compatible to all Laser Rigs, 4.7, Radial & Full Rig. Features ILCA Class Legal Clevis pins included for attachment and...

Low-friction Carbo Air blocks are lightweight, strong, reliable, and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat. The plate is mounted directly aft of the mast slot and requires 2 x Laser XD Harken 16 mm Air Block with Fork...

ILCA Harken XD Outhaul & Downhaul Deck Cleat with Harken Double Jammer. Suits all models ILCA & Laser - Official branded ILCA product. Fasteners 2x A4 Stainless 10 x 1 1/2" self tappers Use sealant in when installing

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material: Dyneema Colour: Blue Pre-cut diameter: 4 mm Length: 1.3...

Standard length ILCA Laser XD Secondary Line Downhaul made from Marlow Excel Control Line giving perfect control with low stretch and smooth tension and release movements. For 6:1 system. Features Smooth cover giving low friction through the...

Laser Outhaul Control Line Pre-cut 4 mm x 4.8 m made from high quality Marlow Excel Control. Features Precision control and release Smooth cover giving low friction through the sheaves Firm construction allows precise grip in the jam cleat Durable...

The Laser Block Ratchet Spring is to hold your ratchet upright, the spring is heavy duty. Replacement stainless steel spring to suit stand up blocks such as the Laser Harken 57 mm Carbo Rachet Block (LS-91333). Laser/ILCA mainsheet block spring for...

Harken Carbo Ratchet Blocks allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Harken 57 mm Blocks feature Cam-Lock or U-Lock locking systems to lock the shackle in front or side positions, or swivel to...

Harken ILCA Laser double block for traveller and mainsheet rigging - For performance sailing. Features For performance sailing Lightweight Helps crank boom down hard when beating ILCA Class legal Suits all Rigs Also suits Laser Performance XD rigs

High performance Harken boom end, mainsheet block with becket for all rigs ILCA or Laser Dinghies. The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to...

ILCA Laser high performance Harken middle boom mainsheet block with bearings - This block is permanently fixed to the laser boom and riveted in place with a stainless steel eye strap. Features ILCA Lass Class legal High performance Harken design with...

ILCA Laser Traveller Line, made from Marlow Excel Dyneema D12 SK78, the high strength gives the confidence to hike the traveller down hard. Features Low friction Lightweight Low water absorption Superb low stretch for ultimate tension on the...

Rooster's Polilite revolutionary, non-twist mainsheet line continues to the preferred choice for leading sailors in ILCA and Laser Dinghy classes. With the load bearing outer cover gripping the lightweight inner core the risk of being confronted by a...

Optiparts Optimist Trolley Bow Wow Replacement Kit is a unique system to lock the bow to the Optimist trolley with one quick and simple movement. Prevents the hull from sliding off on steep launch ramps. Trolley Bow Wow replacement kit for the...

Optiparts Duralite puncture and temperature-proof dinghy trolley wheels Suitable for 25mm dia. x 75 mm axles Features Diameter: 37 cm Ultra lightweight: 1750 g

The Optiflex-lite trolley wheels are the ultimate in wheel design. Large Optiflex-Lite puncture proof wheels for Optiparts Optimist trolleys - the ultimate in wheel design. Suitable for 25 mm x 75 mm axles. Available at Sailcenter...

An Optipart Trolley Wheel Clip in R-Pin style to secure the trolley wheel onto your Oppie trailer. Specifications Material: Stainless steel Style: R

Improved lightweight aluminium Optimist trolley with new hull supports. With bow wow, a unique system to lock the bow to the trolley with one quick and simple movement, preventing the Optimist hull from sliding off on steep launch ramps. This...

Optiparts Optimist Boom Bridle with Ring - 3mm Specifications Ring material: Stainless steel Length: 3 mm

Optiparts Optimist Pins Stop for Optimist spars as used on the Silver and School spars from Optiparts. Specification Colour: Silver