Lewmar External Hatch Handle to suit the Coastline & Ocean Hatch models. Features Fits Lewmar Ocean and Coastline hatches size 30-77 Genuine spare part from Lewmar Sold 1 per pack

The Lewmar Manual Recovery Pawl Kit (Fall Safe) suits the V1/V2/V3/Go Series of Lewmar Windlasses. Parts Diagram The Lewmar Manual Recovery Pawl Kit is shown below as part no: 28,12,29,18,33,19 sold together in one pack.

Lewmar Catch Block for Low & Medium Profile Hatches Features Genuine Lewmar Hatch replacement part Comes with rivets and washers to attach Fits Low Profile / Medium Profile Lewmar part no: 360924992 Black version

Lewmar Replacement Catch Block for Low & Medium Profile Hatches. Features Genuine Lewmar Hatch replacement part Comes with rivets and washers to attach Fits Low Profile / Medium Profile Lewmar part no: 360924992 Grey version

The Lewmar Size 1 Standup Car Conversion Kit converts your shackle type car system to a standup version. Features Lewmar Size 1 Easy to install Suits Lewmar's NTR travellers

The Lewmar 30mm Double Block with Becket is ideal for use with hand-held loads on sailing craft. They are lightweight with high load-bearing capacity. MRT (Metal Replacement Technology) and stainless steel central race ball bearings provide a...

Lewmar DC1 Single Rope Clutches have a series of smooth, in-line and parallel rings hinged at the base. The line is run through these rings, which are then tilted by a single connecting lever. When tilted, the rings force the line to snake through...

The Lewmar 30mm Double Block with Becket is ideal for use with hand-held loads on sailing craft. They are lightweight with high load-bearing capacity. MRT (Metal Replacement Technology) and stainless steel central race ball bearings provide a...

The Lewmar Size 60 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 60

The Lewmar 48ST Chrome Feeder Arm is an official replacement spare part for the Lewmar 48ST Windlass. Part Diagram The Lewmar 48ST Chrome Feeder Arm is shown as part no. 3 in diagram below:

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 30 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 30 Hatches Lewmar part no: 360866999

The Lewmar Size 40 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy  Size: 40

Lewmar Replacement Coastline Small Hatch Handle in grey. Features Fits Coastline hatch sizes 00, 03, 05, 10, 20, 21, 41 & 61 Genuine replacement spare part from Lewmar Comes with attachment rivet and screws for installation

The Lewmar Winch Replacement Cone is a direct replacement part for the Lewmar V1/V2/V3 Series Windlasses. Parts Diagram The Lewmar Winch Replacement Cone V1/V2/V3 Series is displayed as part no. 15 below:

The Lewmar Hatch Telescopic Stay can be installed on any Lewmar 2/3G Hatch or can be used as a replacement stay. The stay kit comes supplied with nuts and bolts for fastening. Features Fits the Lewmar Flush 2G and 3G Hatches Features excellent lid...

The Lewmar Size 30 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 30

Lewmar's anchor bag is designed for the LFX range for stowage when not in use. Features Suits the Lewmar LFX Anchors sizes 2kg (4lbs), 3.2kg (7lbs) and 4.5kg (10lbs) Lewmar part no: 0058302

The Lewmar Size 30 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 30

The Lewmar Size 40 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 40

The Lewmar 40mm Cheek Block is ideal for use with hand-held loads. Lewmar’s Control Blocks feature lightweight, performance load-bearing capacity. MRT (Metal Replacement Technology) and a stainless steel central race and balls provide a weight...

The Lewmar Size 44 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy  Size: 44

The Lewmar Winch Service Kit for the Lewmar V1/V2/V3 Series Windlasses. Contains lip seal, bronze bush, seal washer and 2x delrin washers. Parts Diagram The Lewmar Winch Service Kit V1/V2/V3 is comprised of part no: 2, 35 and 3 as shown below.

The Lewmar Size 44 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 44

The Lewmar Delta Short Bow Rollers fit anchors from 7-16kg. Friction-free surface to make dropping and weighing anchor easier. Features Won’t damage the deck or topsides Stainless steel Allows you to safely stow anchor while cruising and deploy...

The Lewmar Size 60 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy  Size: 60

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 20 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 20 Hatches Lewmar part no: 360864999

The Lewmar Enguard Helm Control Housing is a direct replacement for the housing on your Lewmar Steering Helm (Lever control not included). This part is the housing replacement for the control lever only as pictured below:  

Lewmar Winch Service Kit 6-43 - Suitable for most Lewmar Winches, Sizes 6 to 43. Contents 4 x Circlips 4 x Pawls 4 x Pawl Springs Lewmar Part No: 19700100

Lewmar CHSX Deck Switch Black Closed Features Suitable for DC electric windlasses running on 12 or 24V IP67/5 rated for water resistance Twin sealed switch compartment Composite plastic body Available with polished stainless steel or composite...

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 54 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 54 Hatches Lewmar part no: 360871999

The Lewmar Low Profile Hatch Size 00 has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid...

The Lewmar Low Profile Hatch has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid size yachts...

The Lewmar Dual Joystick Thruster Controls are designed for all Lewmar TT, RT, SRT & VRT thrusters fitted with a blue box and can be fitted to thrusters fitted with a black-box using a controller adapter.  The controllers are installed without...

With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Features Friction levers hold the lid open in...

The Lewmar Low Profile Hatch Size 41 has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid...

The Lewmar Pro-Sport Anchor Windlass 550G is designed as an economical package for rope and chain applications, without compromise to quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful...

The Lewmar 48ST Ocean 12V Anchor Windlass Conversion Kit upgrades your manual winch to an electric model with the Ocean upgrade kit. The kit contains all you need to convert your existing manual winch to an electric powered version. Contents 40-50 12V...

Leisure-SC Semi Rapide Burner Assembly CU-137 for Plastimo, Sowester & Leisure cookers. Compatible Brands Suits the Voyager 4500, Neptune 4500, Neptune 5000 2B, Pacific 4500 , Pacific 5000 2B and Sowester 4500 range of cookers.

The Laser Pico Mainsheet Padeye 91303 is the official deck fitting made in stainless steel from Laser Boats. Dimensions Width: 35mm Length: 40mm Height: 25mm Fasteners: 4 x 5mm countersunk Material: S/S

The Laser Boom Vang Plate with Key Slot fits onto the boom and can be used to attach the Laser Kicker system as a quick connect. Specification Laser part no: 91535