The Lewmar Size 60 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy  Size: 60

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 20 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 20 Hatches Lewmar part no: 360864999

The Lewmar Enguard Helm Control Housing is a direct replacement for the housing on your Lewmar Steering Helm (Lever control not included). This part is the housing replacement for the control lever only as pictured below:  

Lewmar Winch Service Kit 6-43 - Suitable for most Lewmar Winches Sizes 6 to 43. Contents: 4 x Circlips 4 x Pawls 4 x Pawl Springs Lewmar Part No: 19700100

Lewmar CHSX Deck Switch Black Closed Features Suitable for DC electric windlasses running on 12 or 24V IP67/5 rated for water resistance Twin sealed switch compartment Composite plastic body Available with polished stainless steel or composite...

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 54 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 54 Hatches Lewmar part no: 360871999

The Lewmar Low Profile Hatch Size 00 has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid...

The Lewmar Low Profile Hatch has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid size yachts...

The Lewmar Dual Joystick Thruster Controls are designed for all Lewmar TT, RT, SRT & VRT thrusters fitted with a blue box and can be fitted to thrusters fitted with a black-box using a controller adapter.  The controllers are installed without...

With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Features Friction levers hold the lid open in...

The Lewmar Low Profile Hatch Size 41 has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid...

The Lewmar Pro-Sport Anchor Windlass 550G is designed as an economical package for rope and chain applications, without compromise to quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful...

The Lewmar 48ST Ocean 12V Anchor Windlass Conversion Kit upgrades your manual winch to an electric model with the Ocean upgrade kit. The kit contains all you need to convert your existing manual winch to an electric powered version. Contents 40-50 12V...

The Laser Pico Mainsheet Padeye 91303 is the official deck fitting made in stainless steel from Laser Boats. Dimensions Width 35mm Length 40mm Height 25mm Fasteners: 4 x 5mm countersunk Material: S/S

The Laser Centreboard Pivot Plate suits the Vago/Bahia/L2000 sailing dinghies and is made from stainless steel. Features Secures the daggerboard in place Suits the Laser Vago, Bahia or L2000 Specifications Material: Stainless steel Laser part no:...

The Laser Boom Vang Plate with Key Slot fits onto the boom and be used to attached the Laser Kicker system as a quick connect. Specifications Laser part no: 91535

The Laser Lower Section Mast Plug fits the Radial/Pico/Funboat dinghies. Features Fits the mast base (lower section) Specifications Laser part no: 90641

Laser Bahia Stock Pin supplied by RS Sailing. Made in stainless steel   Specifications RS part no: BAH-FO-900

The Laser Rudder Retaining Clip screws (screws sold seperately) onto the transom of your dinghy and is used to secure the rudder in place. Features Made from stainless steel.

Laser Vago Gennaker Pole as supplied by Laser UK. Comes with end caps and fittings. Specifications Material: Aluminium Laser part no: 89803

Laser Vago Batten Set as supplied by RS Sailing.

The Laser Vago Jib Halyard comes with a length of 3 stran rope, stainless steel wire and a crimped eye for rigging. Features Jib wire halyard and spliced rope tail Specifications Laser part no: 81032

Description Standard Nylon Washer for the Laser branded sailing trolleys.

The Laser Bahia Mast Step is supplied by RS Marine. It comes in aluminium and is use dto attach the mast to the deck of the Bahia.  

The RS Laser Bahia Mast Shroud Lower comes with a pre-spliced eye, rigged key fitting and wire for easy install.

The Laser Pico Mast Step fits the mast to the deck of your boat. 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black Laser part no: 91299

Laser Stainless Steel Sheave Block with Clevis Pin Features Easily dettachable cleavis pin Stainless steel body Used frequently on Laser boats for rigging outhauls, downhauls etc Specifications Size: 25mm sheave Max Load 500kg Max line 8mm

The Laser Vago Trapeze Kit contains everything you need to install or replace a trapeze on your boat including wire (with pre-rigged key fittings), handles, camcleats, blocks and rope. Pre-assembled in an easy to use pack. Features 2 x trapeze per...

The Laser Bahia Cap Shroud are supplied by RS Marine and come complete with rigging attachments for an easy install. Specifications Stainless steel wire

Laser Top Vang Block with V-Jammer is a clasic non-race jammer for the Laser Vang system. Made from aluminium. Specifications Sheave diameter: 20 mm / 40 mm Max line diameter: 6 mm

The Laser Funboat Trolley is designed to help you launch and take your boat out of the water. The frame is made from galvanized steel and comes with inflatable tyres that can be replaced if needed. The trolley straps to the back of the boat and the user...

Description The Laser Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows to you to carry two or more boats at the same time. Features Water resistant galvanized steel. Fits all Laser Standard Sailing Dinghy...

Description The Laser Pico Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows to you to carry two or more boats at the same time. Features Water resistant galvanized steel. Fits all Laser Pico Sailing Dinghy...

Description A set of Laser MK1 Battens to suit Laser Standard, Radial and 4.7 Sails. Features Old style design no longer used for racing events. 3 per pack (suitable for one sail) Strong and flexible plastic design Comes with batten caps to protect the...

Description Laser XD Deck Plate Stainless Steel Features Deck plate to attach the outhaul and cunningham blocks Stainless steel

Description The Laser Bahia Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows to you to carry two or more boats at the same time. Features Water resistant galvanized steel. Fits all Laser Bahia Sailing...

The Laser Funboat Mainsail Small Rig is a direct replacement for the Laser Funboat sailing dinghy. Features Small rig size Extra strength polyester Training or club use Specifications Material: 6.3oz Polyester Twin Ply Leach Laser part no: 95700

The Laser Vago Deck Cover 87113 is a waterproof polyestercover to protect your sailing dinghy from while not in use.

RS Sailing Toestrap to fit the middle section of a Laser Pico Dinghy. Specifications RS part no: PIC-HF-400

Replacement Mainsail for the Laser Vago sailing dinghies. Features Comes with sail bag Specifications Laser part no: 95505 Material: Polyester