Protect your marine battery with a Can-SB Battery Box designed for most 100Ah batteries. A battery box will contain acid spills and prevent impact damage from accidents. For increase effectiveness, add a battery box strap to secure it to your boat deck...

Protect your marine battery with a Can-SB Battery Box designed for most 70Ah batteries. A battery box will contain acid spills and prevent impact damage from accidents. For increase effectiveness, add a battery box strap to secure it to your boat deck...

The Nuova Rade Battery Box Large is suitable for marine batteries up to 120A. Check the dimensions on your boat battery to be sure it fits inside. Features External dimensions (LxWxH) = 470x225x255mm  Internal dimensions / Maximum battery...

The Nuova Rade Battery Boxes are acid resistant and come with a support holding strap and a 'cut-in-half' design where the lid and the box are equally sized. Specifications Total Length when Closed: 344mm Total Width when Closed: 233mm Total Height when...

Features Provides electrical insulation for exposed panel backs Provides mechanical protection for panel backs protruding into lockers Lightweight material is easily drilled for wire entrance and exit Meets ABYC requirements for panels with combined AC...

Blue Sea AC Rotary Switch Panel 30 A 3 positions + Off and 2 Pole as under 8358. Fully wired and ready for installation. Blue Sea 230 V AC Source Selector Switch Panel with rotary switch x 3. If either the Blue Sea Switch front or back is to be exposed...

Blue Sea 360 System Distribution Panel BS1217 is one of the most opular models but please contact us for more information on other configurations which may suit your requirements. Features Includes 4205 - square format label set Available with...

Features Isolates the Engine circuit from the House circuit Allows emergency cross connect between isolated battery banks Protects electronics from sags and spikes caused by engine cranking Specifications Number of positions: 3 Nominal voltage: 12 V...

Features Red reverse polarity indicating LED Safety ground screw on panel back Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during fault current condition Specifications Nominal voltage: 230 V...

The Solar Grip is a versatile mounting system that permits a quick temporary or permanent installation of the Sunsei SE-500 / DZ 500 without the need for any hand tools.- Comes with a table mount and a rail mounting system.- No need to drill your deck or...

Victron Solar Cable (4 mm Sq) with pre-assembled male and female MC4 (PV-ST01) connectors. Features Hook up 2 Victron solar panels with this easy connection cables with MC4 ends Designed for use all over the world and for all climates Inter-linked...

For 12V Battery use 36 cell solar panelsFor 24V Battery use 72 cell solar panels or 2x 36 cell in series Features Load output with low battery voltage disconnect function Lighting control function, one timer only Three stage battery charging (bulk,...

Self adhesive pins for fixing sound insulation panels. Sold seperately. Specification Length: 65mm

Joining tape increases the efficiency of the installation and gives a neat professional look. Results can be spoilt by a poorly fitting hatch or a panel which rests straight on a timber frame. As with a car door, a sealing strip should be applied as...

Joining tape increase the efficiency of the installation and gives a neat professional look. Results can be spoilt by a poorly fitting hatch or a panel which rests straight on a timber frame. As with a car door, a sealing strip should be applied as...

Halyard 45mm Maritex Self Adhesive. Halyard's Maritex is a technical leader in sound insulation materials and the 45mm thickness, with its twin barrier is one on highest ratings available. Maritex composition includes of an immensely tough fibreglass...

Halyard 32mmmm Maritex Self Adhesive  Halyard's Maritex is a technical leader in sound insulation materials and the 32mm thickness is generally considered industry standard. Maritex composition includes of an immensely tough fibreglass cloth with a...

Halyard 32mmm Maritex Self Adhesive Sound Insulation Halyard's Maritex is a technical leader in sound insulation materials and the 32mm thickness is generally considered industry standard. Maritex composition includes of an immensely tough fibreglass...

Halyard 12mm Maritex Self Adhesive.  Halyard's Maritex is a technical leader in sound insulation materials. This 12mm is ideal for use when space will not allow for the more standard 32mm - It is particularly suitable for cutting and fitting into...

Halyard 12mm Maritex Self Adhesive. Halyard's Maritex is a technical leader in sound insulation materials. This 12mm is ideal for use when space will not allow for the more standard 32mm - It is particularly suitable for cutting and fitting into tight...

The Haztec Gas Controller System incorporates a two sensors, 1 x Gas and 1 x CO2  with a solenoid gas control valve. . If gas build-up is detected, the controller operates the alarms and automatically shuts down the gas supply by means of the...

Exhaust Lagging 30mm Internal Diameter. Suitable for: Thermo Top E & C Air Top 2000 models Air top 3500 & 5000 Air Top EVO 3900 & 5500 This product is designed to sleeve the heaters exhaust pipe to protect the user from burning themselves...

Suits both Webasto Air Top Evo Heaters (2000STC, Evo 40, Evo 55) and also the Webasto Thermo Top C Water Heaters.The Webasto Multi-Control sets new standards in terms of its modern design and user-friendliness that allows fast and intuitive operation...

Weekly timer for use with the Webasto Evo Heater: 3900 & 5500.Supplied by 12V systems.with 7 day timer including 4 daily programmable events.

To suit ducting for the Eberspacher or Webasto Heaters. This Webasto Adapter Ring reduces the size down from 9 mm to 8 mm ducting.

Webasto 90mm Flap Valve also know as Y-valves for Webasto Air Heaters and ducting.

Webasto 60mm Flap Valve also know as Y-valves for Webasto Air Heaters and ducting.    

The Webasto Tee Piece Joint for the 90mm heater ducting. No extra tools needed. The Webasto T-Piece can be screwed onto bare ducting (see related items) with a secure fit. It redistributes heat to different outlets (see related products) with minimal...

The Webasto Tee Piece Joint for the 90mm heater ducting. No extra tools needed. The Webasto 90mm T-Piece can be screwed onto bare ducting (see related items) with a secure fit. It redistributes heat to different outlets (see related products) with...

This back nut sandwiches a 90mm fitting in a bulkhead and provides a tail to receive 90mm ducting. Specification Colour: Black

This back nut sandwiches a 6mm fitting in a bulkhead and provides a tail to receive 6mm ducting. Specification Colour: black

Closable vent with outer thread. Suitable for 90 mm union nuts. Specifications Colour: Black / white Outer: 90mm

Webasto Closeable 60mm Duct Outlet Features Controlling direction of warm air flow  Additional outlet to an existing systems Closeable to allow air distribution and rotating for desired direction  Specifications Colour: Black Outer: 60mm

The Webasto Heater 60mm Outlet is perfect as a vent for a Webasto Heater System on a boat or caravan. The outlet is adjustable 360°. The outlet fits straight onto bare Webasto heater ducting.

New range outlets from Webasto giving a modern and ergonomic look Available in Black, White and Grey (Grey to special order) and supplied in size: 90mm. Features  Open Outlets: Atleast one outlet in the system must be an ' Open Type ' to prevent...

At least one Webasto Heater Outlet in the system must be an 'Open Vent Type' to prevent accidental overheat should all other vents be closed.

A black plastic Webasto Outlet for 60mm ducting. The outlet has 90 degree vents which expel air straight out.Simple to install. Simply screw into bare Webasto 60 mm Ducting.

A Webasto End Cap for 90mm Ducting made from black plastic.

A Webasto End Cap for 60mm Ducting made from black plastic.

For inline ducting joins.