Replacement part to fit the Lofrans Falkon Windlass Drum Upper Part. Feature Material Chrome plated bronze Parts Diagram Falkon Windlass Drum fits part no: 839A as per below:

Lofrans Falkon Windlass Chain Pipe 469 is a thru deck fitting that guides the chain onto the gypsy. Feature Ensures the smooth movement of the chain from and to the chain locker

Lofrans Falkon Windlass Drum Bottom Section 840 comes in two parts (upper section sold seperately). Specification Material: Chrome plated bronze

The Lofrans X2/ Project 1000 Gipsy engages 8mm chain for use with vertical windlasses. Specifications Chain diameter: 8 mm ISO 4565 / DIN 766 Material: Stainless steel Suits: Lorans X2 or Project 1000 Windlasses

The Lofrans X1 DC Replacement Motor in 12V for 500W windlasses. Feature Official replacement motor for the Lofrans X1 Windlass Specifications power supply: 12V  Pole diameter: M5 Screw hole diameter: M4 Drive shaft diameter: 11 mm Drive shaft...

Lofrans Project X2 Replacement Motor comes in 1000 watt for 24 volt power supply. Features Direct replacement for the X2 Lofrans Windlass Waterproof IP56 High power 1000 Watt motor Specifications For Lofrans Airon, Kobra, Progress 1 ( Also X1,...

The Lofrans SX2 Vertical Windlasses are suitable for sail and motor boats from 6m to 27m in length. Includes Dual direction solenoid pack Rope drum Handle Gypsy for chain CD / Instruction manual Features Compact round base design Marine AISI 316L...

Replacement of a 45-gram gas cylinder for Gas Inflation Life Jackets. Generally suits 220N Lifejackets, but very important to check the correct size before fitting.  The size of the Cylinder is normally printed on the bladder or the label of the...

The Lewmar Size 00 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 0

The Lewmar 30-48 Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 48ST Lewmar part no: 45000029 Part Diagram The diagram below shows the Lewmar 30ST...

The Lewmar 16ST Stripper Ring Replacement Kit is a direct official replacement part for the Lewmar 16ST Windlasses. Parts Diagram The Lewmar 16ST Stripper Ring Replacement Kit is part 7 from the diagram below:  

The Lewmar 15ST - 70ST Winch Collet Replacements are an official spare part for the Lewmar Windlasses range from 15ST EVO series to 70ST EVO series. Come sold as pair Part Diagram The Collets are shown in the image below as part no. 3.

The Lewmar Size 2 Ball Loader comes with White Screws and allows you to take off the cars on your Lewmar Size Track without the ball bearings escaping. Specification Product Type: Spares  

Lewmar Control Sheave Bearing Sz1 Lewmar Control Sheave Bearing Sz1 - For Lewmar Ocean traveller cars.

Ideal for use with hand-held loads, Lewmar's control Blocks feature lightweight, performance load-bearing capacity. MRT(Metal Replacement Technology) and a stainless steel central race and balls provide a weight advantage, while Long Fibre Technology...

The Lewmar Small Hatch Handle Kit fits the Lewmar Flush, Low Profile and Coastline Hatches. Installation screw included. Features Suits the Coastline, Flush or Low Profile Hatches Small left handle in grey

Lewmar Standard Portlight Handle Kit to fit the following portlights: Standard portlight, sizes 0, 1, 1RE, 2, 3, 4, 4L, 4R, 5 & 7RE Standard portlight - Bavaria models: barrel, double barrel, long port, mitred port aft, mitred port fwd, mitred stbd...

Lewmar Size 1 Ocean Car Buffer Kit has replacement end caps for the Ocean series of Lewmar Travellers. Comes with screws and everything needed to replace the old unit's buffers.

The Lewmar 50mm Synchro Blocks are engineered for speed, efficiency, and superior handling. We use a combination of scientifically optimised block geometry, a Free-Spin bearing, and a self-aligning head to reduce friction and increase efficiency by up...

The Lewmar 34ST/40ST Winch Drum Bearing Kit are an official replacement part for Lewmar Winches: 34-40 series. Parts Diagram The Lewmar 34ST/40ST Drum Bearings are shown as part no. 9 below:  

The Lewmar 30mm Single Block Max Line 8mm is ideal for use with hand-held loads. Lewmar’s Control Blocks feature lightweight, performance load-bearing capacity. MRT (Metal Replacement Technology) and a stainless steel central race and balls...

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 18 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 18 Hatches Lewmar part no: 360875999  

Lewmar External Hatch Handle to suit the Coastline & Ocean Hatch models. Features Fits Lewmar Ocean and Coastline hatches size 30-77 Genuine spare part from Lewmar Sold 1 per pack

The Lewmar Manual Recovery Pawl Kit (Fall Safe) suits the V1/V2/V3/Go Series of Lewmar Windlasses. Parts Diagram The Lewmar Manual Recovery Pawl Kit is shown below as part no: 28,12,29,18,33,19 sold together in one pack.

Lewmar Catch Block for Low & Medium Profile Hatches Features Genuine Lewmar Hatch replacement part Comes with rivets and washers to attach Fits Low Profile / Medium Profile Lewmar part no: 360924992 Black version

Lewmar Replacement Catch Block for Low & Medium Profile Hatches. Features Genuine Lewmar Hatch replacement part Comes with rivets and washers to attach Fits Low Profile / Medium Profile Lewmar part no: 360924992 Grey version

The Lewmar Size 1 Standup Car Conversion Kit converts your shackle type car system to a standup version. Features Lewmar Size 1 Easy to install Suits Lewmar's NTR travellers

The Lewmar 30mm Double Block with Becket is ideal for use with hand-held loads on sailing craft. They are lightweight with high load-bearing capacity. MRT (Metal Replacement Technology) and stainless steel central race ball bearings provide a...

Lewmar DC1 Single Rope Clutches have a series of smooth, in-line and parallel rings hinged at the base. The line is run through these rings, which are then tilted by a single connecting lever. When tilted, the rings force the line to snake through...

The Lewmar 30mm Double Block with Becket is ideal for use with hand-held loads on sailing craft. They are lightweight with high load-bearing capacity. MRT (Metal Replacement Technology) and stainless steel central race ball bearings provide a...

The Lewmar Size 60 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 60

The Lewmar 48ST Chrome Feeder Arm is an official replacement spare part for the Lewmar 48ST Windlass. Part Diagram The Lewmar 48ST Chrome Feeder Arm is shown as part no. 3 in diagram below:

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 30 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 30 Hatches Lewmar part no: 360866999

The Lewmar Size 40 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy  Size: 40

Lewmar Replacement Coastline Small Hatch Handle in grey. Features Fits Coastline hatch sizes 00, 03, 05, 10, 20, 21, 41 & 61 Genuine replacement spare part from Lewmar Comes with attachment rivet and screws for installation

The Lewmar Winch Replacement Cone is a direct replacement part for the Lewmar V1/V2/V3 Series Windlasses. Parts Diagram The Lewmar Winch Replacement Cone V1/V2/V3 Series is displayed as part no. 15 below:

The Lewmar Hatch Telescopic Stay can be installed on any Lewmar 2/3G Hatch or can be used as a replacement stay. The stay kit comes supplied with nuts and bolts for fastening. Features Fits the Lewmar Flush 2G and 3G Hatches Features excellent lid...

The Lewmar Size 30 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 30

Lewmar's anchor bag is designed for the LFX range for stowage when not in use. Features Suits the Lewmar LFX Anchors sizes 2kg (4lbs), 3.2kg (7lbs) and 4.5kg (10lbs) Lewmar part no: 0058302

The Lewmar Hatch Cover for the Ocean model in Navy colour is a high-quality protective cover designed specifically to fit the Ocean series hatches from Lewmar. It’s crafted to safeguard your hatch from UV damage, dirt, and general wear when the...