AIS-MAST, AIS 3dB 0.9m stainless steel masthead whip antenna. This omni-directional antenna has been specifically designed so that the user can dedicate one antenna for the narrowband frequency specified for AIS (Automatic Identification...

This handy kit includes 93-ohm RG-62 cable with male and female Motorola connectors installed.  Features 10ft RG-62 coax Plugs pre-installed Coax Supplied: 10 ft of RG-62 Connector Supplied: Motorola type plugs, installed

Shakespeare under V-Tronix 4715 Mast Mounts (Pair) for antennas. Pair of galvanised steel mounting clamps.  Features For V-Tronix MD 7A or MD 15A antenna  Galvanised steel construction  Includes pliable rubber pad to cushion the...

White nylon, 25mm (1") high mount. Features 70mm diameter base  Suitable for moderate duty operations  Low-profile 

Swivel type stainless steel rail mount vertical, horizontal or slanted rails. Features Ratchet action for antenna fold-down  Easy installation on 22mm (7/8") and 25mm (1") rails  Not for use with antennas longer than 2.4m (in self supporting...

V-Tronix Nylon Ratchet Rail Mount Bracket.  Swivel type nylon rail mount vertical, horizontal or slanted rails.  Features Ratchet action for antenna fold-down  Easy installation on 22mm (7/8") and 25mm (1") rails  Complete with...

Shakespeare V-Tronix Nylon Fixed Rail Antenna Mount 4722. Economy fixed rail mount for horizontal rails. This sturdy plastic mount attaches to 7/8in and 1in horizontal rails and has a side slot in the 1in-14 thread section for antennas with coax...

The Sowester stainless antenna ratchet mount fit is fully adjustable and fits VHF, FM and AIS antennas with 1" x 14 TPI female thread. Features Four-way ratchet design with lever handle allows full adjustment the antenna angle nd position Standard 1" x...

Four-way ratchet design with handle, for deck or side mounting. Features Standard 1" x 14TPI thread  Not for use with antennas longer than 2.4m in self-supporting mode Bolt holes: 5/16in dia., 3in x 1½ in on centre Hardware: sold separately

Heavy Duty RG-213 VHF Cable - Sold per meter. VHF antenna cable for AIS and VHF devices. These cables use 50 Ohm RG213 coax. Fits PL-259 connectors (see related products list below). Sold per meter.

Sowester RG213 VHF cable plug PL-259-9 . For use with  heavy duty RG213 coaxial cable.  Specifications Ohms Rating: 50 Ohms Cable entry: 10.3mm (RG213) Material: Silver plated Brass

The V-Tronix VHF MD15 is a 2.8m commercial grade marine VHF antenna, carefully constructed and capable of withstanding the worst elements. All the V-Tronix antennas offer excellent bandwidth/VSWR characteristics within the frequency range of 156 MHz -...

SL156C V-Tronix Emergency VHF Antenna for instant set up, if your main antenna becomes broken or disabled. Approved for RORC racing. Features Sealed in waterproof container  Stored easily on bulkhead or in flare pack  6m of miniature coaxial...

V-Tronix Commercial Heavy Duty VHF Aerial MD7A.This Commercial Marine VHF Antennas is carefully constructed and is capable of withstanding the worst the elements can throw at it. The antenna offers excellent bandwidth/VSWR characteristics within the...

Shakespeare Galaxy VHF Antenna - 8’ (2.4m) VHF Marine Band 6dB. Features Brass and copper elements Chrome-plated brass ferrule with standard 1in-14 thread Includes 15ft RG-58 cable, which can be cut to size, and a PL-259 connector Suggested...

Shakespeare 5101-S  V-Tronix VHF Antenna - 8’ (2.4m) VHF Marine Band 6dB. End-fed with matching stub. A new standard of excellence in an economical antenna! Shakespeare brings you the best of the high-end features in an 8ft antenna with a...

5215 Classic AIS Squatty Body® Antenna   3′ (0.9m) VHF/AIS Marine Band 3dB Gain Communication performance over VHF marine frequencies is optimized with the master craftsmanship of this Classic 5215 Squatty Body®, built...

End-fed 1/2-wave stainless steel whip antenna in 90cm.The 5215-D ia light weight, low-profile, stainless steel whip antenna, specially designed for masthead mounting on sailing boats.Please note: This unit requires additional RG58 cable, PL-259 and ac151...

Replacement Wind Indicator for Hawk antenna.Replacement kit to suit the YHK antenna.

The V-Tronix stainless steel whip VHF antenna with Hawk wind indicator fitted. See V-Tronix code: YHK. The Hawk was designed and developed to meet the requirements of the most demanding sailors. It features the popular V-Tronix solderless connector...

The MD20 V-Tronix Stainless Steel Whip Antenna has been designed to withstand the most rugged punishmentand is manufactured to the highest standards and quality – All vulnerable electrical parts are sealed in epoxy resin to resist water ingress...

The V-Tronix Raider Antenna for rigid inflatable boats (RIB's) and powerboats where shock can usually affect the fibreglass in other antennas this one comes in a marine painted steel whip antenna for durability and long life. See V-Tronix code: YRR...

V-Tronix 427-S 1.5m powerboat VHF fibreglass antenna for small to medium craft.Good looking, durable, smooth gloss finished, white fibreglass VHF antenna, ideal for power and work boats427-S Features- Durable, smooth gloss finished, white fibreglass VH.

Shakespeare VHF Antenna - 427N The Shakespeare 427-N 1.5m fibreglass VHF antenna with 3db gain designed for small to medium boats. This antenna replaces the old RV120-P and coes with 6m cable and PL259 plug.V-Tronix brings you the best of the high-end...

The V-Tronix MD23N VHF Antenna antenna has been designed to withstand the most rugged punishment. It is manufactured to the highest standards and quality and all the vulnerable electrical parts are sealed in epoxy resin to resist water...

An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. The 5206-N has a nylon ferrule. Features Quality copper cable elements for good range and efficiency Nylon ferrule Includes 15ft...

Install GPS & VHF antennas above the radar for maximum visibility and performance using the Scanstrut Pole Mount SC111 The Scanstrut Pole Accessory is designed for the installation of GPS antenna and Whip type antennae of up to 1m in height...

For installation with Composite & Aluminium Power Tower. Angles your radar down 4° below horizontal and provides a level horizon for your radar when the boat is bow’s up underway. Features Fits under the base of your Power Tower Pre-fitted...

Stainless steel mast mounting brackets for Echomax Radar Reflectors EM305.

The Echomax EM230 Bracket suits the Em230 Midi Base Mounted Radar Reflector only.Please note: Echomax Radar Reflector in picture not included (see related products) Features Stainless Steel Suits 230 Midi Base Mount Only Reflector not included!

Mast Mounting Brackets to suit Echomax Radar Reflectoes model EM230, EM230BR & EM230 Midi

The EM305PE is a popular high response radar reflector with a robust Polyethylene case and is suitable for large 15 - 20 metres size vessels. Successfully tested by QinetiQ to ISO 8729-1999 and meets RORC,ORC,ISAF 2012/13 and WCC requirements of 10M2...

The Echomax EM230I Inflatable Radar Reflector combines superior performance with complete flexibility in terms of use and mounting options. "Highly recommended in Yachting Monthly 2012- Exceeds RORC requirements"The 230I Reflector is a DuPont...

Echomax 230 BR Radar Reflector- This model is a retrofit replacement for the Firdel Blipper 210-7 and is suitable for vessels 9 metres and above. Features Restyled case with fixing centres of 545mm. Direct replacement for the Firdell Blipper 210-7...

The medium sized Echomax radar reflector with a maximum 20 m2 radar cross section is suitable for 8-15 metres sailing yachts, RIBs and motor cruisers. Suitable for mast, deck bracket or halyard suspension. Fully tested by QinetiQ. Exceeds...

Trem 18" Aluminium Radar Reflector. Features Meets RORC Simple to assemble Folds flat when not in use Specifications Weight: 1.1kg Dimensions (Diagonal): 46cm x 18"

Trem 16" Aluminium Radar Reflector Features Meets RORC Simple to assemble Folds flat when not in use Specifications Weight: 0.9kg Dimensions (Diagonal): 40cm x 16"

A tough and reliable extension speaker for VHF radios. Ideal for sail or power boats.A rugged, corrosion resistant speaker designed for outside use on sea going vessels. It can be stirrup mounted using the bracket provided or it can flush mounted by...

ICOM SP-24E standard external speaker for IC-M801, IC-M802 and GM800 Radio  Specification table { width: auto; border-collapse: collapse; border: 1px solid #999; } th, td { border: 1px solid #999 !important; /* Force uniform...

Scanstrut Dual PowerTower Satcom in 40cm to mount the following antennas:Radar: 2kW and 4kW Raymarine, Simrad or Garmin radomes OR open-array radarsSatcom/TV: any 40cm antenna Scanstrut’s Dual PowerTower® mounts allow the installation...