The Lewmar Size 40 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 40

The Lewmar 40mm Cheek Block is ideal for use with hand-held loads. Lewmar’s Control Blocks feature lightweight, performance load-bearing capacity. MRT (Metal Replacement Technology) and a stainless steel central race and balls provide a weight...

The Lewmar Size 44 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy  Size: 44

The Lewmar Winch Service Kit for the Lewmar V1/V2/V3 Series Windlasses. Contains lip seal, bronze bush, seal washer and 2x delrin washers. Parts Diagram The Lewmar Winch Service Kit V1/V2/V3 is comprised of part no: 2, 35 and 3 as shown below.

The Lewmar Size 44 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 44

The Lewmar Delta Short Bow Rollers fit anchors from 7-16kg. Friction-free surface to make dropping and weighing anchor easier. Features Won’t damage the deck or topsides Stainless steel Allows you to safely stow anchor while cruising and deploy...

The Lewmar Size 60 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy  Size: 60

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 20 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 20 Hatches Lewmar part no: 360864999

The Lewmar Enguard Helm Control Housing is a direct replacement for the housing on your Lewmar Steering Helm (Lever control not included). This part is the housing replacement for the control lever only as pictured below:  

Lewmar Winch Service Kit 6-43 - Suitable for most Lewmar Winches, Sizes 6 to 43. Contents 4 x Circlips 4 x Pawls 4 x Pawl Springs Lewmar Part No: 19700100

Lewmar CHSX Deck Switch Black Closed Features Suitable for DC electric windlasses running on 12 or 24V IP67/5 rated for water resistance Twin sealed switch compartment Composite plastic body Available with polished stainless steel or composite...

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 54 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 54 Hatches Lewmar part no: 360871999

The Lewmar Low Profile Hatch Size 00 has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid...

The Lewmar Bavaria Portlight is 188mm X 690mm with a grey plastic trim. The glass deck hatch comes with three handles to secure the lid. Features Acrylic smoke grey Aluminium frame silver anodized Specifications Overall dimensions 188 x...

The Lewmar Dual Joystick Thruster Controls are designed for all Lewmar TT, RT, SRT & VRT thrusters fitted with a blue box and can be fitted to thrusters fitted with a black-box using a controller adapter.  The controllers are installed without...

With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Features Friction levers hold the lid open in...

The Lewmar Low Profile Hatch Size 41 has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid...

The Lewmar Pro-Sport Anchor Windlass 550G is designed as an economical package for rope and chain applications, without compromise to quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful...

The Lewmar 48ST Ocean 12V Anchor Windlass Conversion Kit upgrades your manual winch to an electric model with the Ocean upgrade kit. The kit contains all you need to convert your existing manual winch to an electric powered version. Contents 40-50 12V...

Leisure-SC Semi Rapide Burner Assembly CU-137 for Plastimo, Sowester & Leisure cookers. Compatible Brands Suits the Voyager 4500, Neptune 4500, Neptune 5000 2B, Pacific 4500 , Pacific 5000 2B and Sowester 4500 range of cookers.

The Laser Boom Vang Plate with Key Slot fits onto the boom and can be used to attach the Laser Kicker system as a quick connect. Specification Laser part no: 91535

The Laser Lower Section Mast Plug fits the Radial/Pico/Funboat dinghies. Feature Fits the mast base (lower section) Specification Laser part no: 90641

Laser Bahia Stock Pin supplied by RS Sailing. The long rudder pin attaches the rudder head to the gudgeons. Feature Made in stainless steel Specification RS part no: BAH-FO-900

The Laser Rudder Retaining Clip screws (screws sold separately) onto the transom of your dinghy and are used to secure the rudder in place. Feature Made from stainless steel

Laser Vago Gennaker Pole as supplied by Laser UK. Comes with end caps and fittings. Specifications Material: Aluminium Laser part no: 89803

Laser Vago batten set and Laser Vago sailboat sails in stock at Sailcenter

Standard Nylon Washer for the Laser-branded sailing trolleys.

The Laser Bahia Mast Step is supplied by RS Marine. It comes in aluminium and is use dto attach the mast to the deck of the Bahia.  

The RS Laser Bahia Mast Shroud Lower comes with a pre-spliced eye, rigged key fitting and wire for easy install.

The Laser Pico Mast Step fits the mast to the deck of your boat. 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black Laser part no: 91299

The 25mm plain bearing block range is one of Sea Sure's oldest and best selling ranges. The range uses marine grade stainless steel side plates and rivets with an arnite (plastic) sheave which is incredibly hard wearing and light. This range could be...

The Laser Vago Trapeze Kit contains everything you need to install or replace a trapeze on your boat including wire (with pre-rigged key fittings), handles, camcleats, blocks and rope. Pre-assembled in an easy to use pack. Features 2 x trapeze per...

The Laser Bahia Cap Shroud is supplied by RS Marine and comes complete with rigging attachments for an easy install. Specification Stainless steel wire

Laser Top Vang Block with V-Jammer is a clasic non-race jammer for the Laser Vang system. Made from aluminium. Specifications Sheave diameter: 20 mm / 40 mm Max line diameter: 6 mm

The Laser Funboat Trolley is designed to help you launch and take your boat out of the water. The frame is made from galvanized steel and comes with inflatable tyres that can be replaced if needed. The trolley straps to the back of the boat and the user...

The Laser Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Standard Sailing Dinghy trollies

The Laser Pico Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Pico Sailing Dinghy trollies

A set of Laser MK1 Battens to suit Laser Standard, Radial, and 4.7 Sails. Features The old-style design is no longer used for racing events 3 per pack (suitable for one sail) Strong and flexible plastic design Comes with batten caps to protect the...

Laser XD Deck Plate Stainless Steel Features Deck plate to attach the outhaul and Cunningham blocks Stainless steel

The Laser Bahia Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Bahia Sailing Dinghy trollies