Replacement Jabsco Motor 24v for units 21950-1903 & 21950-1703

The Jabsco Maxi Puppy Motor Assembly 12V SP8012-0159 is a high-performance replacement motor designed for Jabsco Maxi Puppy 3000 series pumps, including models like the 23610-3003. Engineered for reliability, this 12V DC motor ensures consistent...

Jabsco 1" Bronze Clutch Pumps are powerful engine-driven units. These tough and fully-serviceable belt-driven pumps will self-prime rapidly and work continuously over a wide engine speed range. Installed in innumerable fishing boats and other workboats...

Description The Jabsco Quiet Flush Electric Toilet was designed to reduce noise levels when flushing. A three-way switch allows operation of the flush pump, the discharge pump or both, allowing the water level to be adjusted for user comfort. These...

  Features Built-in dry-running protection for up to 30 minutes after initial prime Rapid self-priming from dry up to 2m Will handle hard or soft solids Corrosion resistant bronze body, stainless steel shaft Carbon-ceramic mechanical shaft...

Description From crowded charter boats to racing yachts and everything in between, the Jabsco Quiet Flush E2 electric marine toilet has been designed to solve some of the biggest marine waste challenges facing boat owners and manufacturers. With its...

Description Isotherm Ice Cube Trays - 2 Per Pack. Features Fits the Isotherm Cruise Fridges Made from stainless steel

Description The Isotherm Cruise 100 Fridge Retainer is a spare part designed for the CR100 refrigerator door. This direct replacement is a stainless steel bar that fits onto the fridge door bottom storage compartment. This retainer ensures secure storage...

Description The Isotherm Fridge Shelf part number SGC0009AA, is crafted to improve the storage capacity and accessibility within your Cruise 65 marine fridge. Specifications Model Compatibility: Perfectly fits the Isotherm Cruise 65...

Description 2-piece installation frame for your Isotherm Cruise 85 Fridge. Specifications Isotherm part no: SGB00029AA Length: 62 cm Width: 3.5 cm

Description The Isotherm Cruise 130 Fridge O-Evaporator Mount Kit is designed specifically for securing O-Evaporators. Provides everything you need to mount an O-Evaporator in your Cruise 130 Marine Fridge. Features Includes all necessary parts for a...

Description Introducing the Isotherm 2 Side Frame Black CR85, designed for those who value both functionality and aesthetics in their marine refrigeration solutions. This frame is specifically crafted for the Isotherm CR85 refrigerator model, enhancing...

Description Isotherm Cruise 80/100 Fridge Shelf Rod SGC00073AA is a direct replacement for the middle bar on the fridge door. Specifications Fits models: Cruise 80, Cruise 100 Dimensions: 70 cm (Length) x 2 cm (Diameter) Weight: 0.5 kg (1.1...

Description Enhance the appearance and functionality of your Isotherm CR42 fridge with the Isotherm 3-Side Black Frame. This meticulously designed frame is the perfect accessory for those looking to achieve a clean, professional look in their marine or...

Description The Isotherm Evaporator CR85/130L G159 is a high-quality replacement evaporator designed for specific Isotherm refrigeration systems. This essential component plays a crucial role in maintaining optimal cooling performance. Features Precise...

Description This genuine Isotherm Fridge Evaporator Door is designed to replace the original door on your Cruise 80, 100, or 120L refrigerator. It's a crucial component that helps maintain optimal temperature and energy efficiency. Specification Part...

Description Ensure a tight seal and optimal performance of your Isotemp water heater with this genuine replacement gasket. Specifications Suits water heater models: Slim, Basic and Spa Isotemp part no: SDF00025AA  

Description Elevate the style and integration of your Isotherm CR65 fridge with the Isotherm 3 Side Frame in Black. This frame is the ultimate accessory for those who demand both functionality and aesthetics in their marine or RV living spaces. Also...

Description Elevate the aesthetic of your marine or RV living space with the Isotherm Teak Doorfront for the CR130 Fridge. This doorfront transforms your refrigerator into a statement piece, combining the natural beauty of teak with the functionality and...

Description The Isotherm 3 Side Installation Frame Black fits the CR42 and CR49 fridges. A frame covers the cutout edges where the fridge is installed, giving a cleaner and more finished look. It can hide rough cuts in the bulkhead or cabinetry, ensuring...

Description Transform your icebox into a high-performance fridge or freezer with the Isotherm Flat Evaporator Plate, designed for maximum efficiency in confined spaces. This particular model, measuring 1000mm x 270mm, is perfect for larger refrigeration...

Description Experience the luxury of hot water on demand with the Isotemp SPA 40L Water Heater, designed for marine, RV, and small home applications where space and efficiency are critical. This water heater brings comfort and convenience to your travels...

Description Upgrade your refrigeration system with the Isotherm ASU Red Electronic Unit, specifically designed for compatibility with Danfoss compressors. This control module introduces smart functionality to your cooling setup, perfect for marine, RV,...

Description The Isotherm 125L Fridge Unit with Oval Evaporator is your go-to solution for refrigeration on the go, whether on a yacht, RV, or any outdoor adventure. Its innovative oval evaporator ensures even cooling throughout the unit, reducing cold...

Top mast Plug to suit ILCA Composite upper Mast

Bottom Plug to suit ILCA Composite upper mast

Grabrails for ILCS and Laser Sailboats - Colour Grey - Suits all Rigs

Icom M401 Volume Knob Spare

Icom Carrying Case for the IC-A3 and IC-A22 models fo VHF radio.

Description Designed to meet the demands of the licence free PMR 446 service, the IC-4088SR builds on its predecessor's functionality, features and operating performance. Featuring a high level of flexibility, the IC-4088SR allows instant communication...

A rugged design, the IC-F4GS is an ideal choice when looking to purchase a commercial transceiver. Dependent on the model chosen either 40 or 100 talk channels are present, allowing for the radio to be used in larger scaled operations, this alongside...

The Icom IC-F10 Battery Pack fits the IC-F10 VHF Radio. This product is discontinued with Icom. Specifications Capacity: 1100mAh Type: NiMH Icom part no: BP174.001

Description Official Icom Battery Charger for the Icom M72 and M88 VHF Radios. Feature Comes with UK plug

Description The Icom M411 VHF Flush Mount Kit is a simple way of installing a flush mounted VHF into your dash panel. Also fits the M421 Icom Radio. Features Suits Icom VHF: IC-M411, IC-M421 Made from stainless steel Icom spare part no: MB69.001

Description Icom VHF Charger for the M35, M71 & M87 Radios. Features Icom part no  BC145.005 Comes with UK plug.

Icom IC-F3 Battery replacement under part no: BP195.001. This product is discountiued with Icom. Specifications Capacity: 1700 mAh Voltage: 9.6 V Suits Icom VHF models: IC-A4, IC-A4C, IC-A4E, IC-F3, IC-F3S, IC-F4, IC-F4N, IC-F4S, IC-F4SR, IC-F4SW,...

Icom M423 VHF Flush Mount Kit S/S MB132.001. Features Stainless steel Suits Icom m423 and m323 radios

Description Headset adapter cable designed for VOX hands-free operation. The OPC-1392 VOX headset adapter cable is compatible with the ICOM IC-M71,IC-M73 and IC-GM1600E marine radios.

Description Icom BC251 Rapid Charger for IC-M94DE VHF Radio. Keep your marine communications at peak performance with the Icom BC251 Rapid Charger, specifically engineered for the IC-M94DE VHF Handheld Radio. This charger is your key to uninterrupted...

Description Icom HM-214H IPX7 Waterproof Speaker Microphone for GM800 Marine VHF Radio. Experience unparalleled reliability with the Icom HM-214H Waterproof Speaker Microphone, designed specifically for the Icom GM800 marine VHF radio. This microphone is...