The Holt replacement toestrap plates in royal blue are designed specifically for dinghy sailors using the Laser / Pico class. These plates replace standard foot-strap mounting plates, offering a fresh colour-coded look and durable finish for club...

The Holt Clevis Pin 5/16″ × 1″ (F615) is a precision-manufactured marine-grade fastener made from Grade A4 (AISI 316) stainless steel. Ideal for rigging, deck fittings, shackles and small spars on sailboats around Ireland, this pin...

The Holt Rudder Mega Bolt Assembly (HT7015) is a robust stainless-steel lower rudder bolt set designed for dinghies (such as the Laser/ILCA class) where a durable, corrosion-resistant rudder pin is required. The assembly is specified as a 3/8″...

The Holt Halyard Stopper Black 16 mm is a compact, reliable stopper designed for halyards and control lines up to approximately 12 mm diameter on sailing yachts and dinghies. According to the Holt “Accessories” catalogue, the part number for...

If you’re seeking a reliable fairlead for controlling lines through cam-cleats with minimal fuss, the Nautos Composite Fairlead delivers a smart solution. Designed to suit both the smaller cam-cleat systems and larger versions, this fairlead...

The Nautos Fairlead for Cam Cleat (Black) offers a clean, low-profile fairlead specifically designed to work with Nautos cam-cleats, improving rope entry and alignment, reducing chafe and enhancing reliability on deck. Ideal for Irish sailboats facing...

The Holt L1 Friction Pad is a replacement component designed for dinghy daggerboards—specifically for the driver‐type “Laser” foiling or standard Laser hulls where the board retention uses a friction pad. According to listings, it's...

The Nautos Low Friction Ring (30 mm & 40 mm) is a precision-engineered, lightweight alloy ring designed to minimise friction and wear in high-load marine rope and control line systems. The hard-anodised aluminium body with a Teflon® finish...

The Nautos Stanchion Lead is a purpose-built lead block designed for attachment to a 1″ (≈ 25 mm) stanchion, helping direct control lines cleanly with minimum friction. Made with a composite housing and stainless steel components. For Irish...

Holt’s Copper Tacks at ½″ (13 mm) size offer a durable fixed-fastening solution for marine deck fittings, upholstery, trim and other installations where corrosion resistance and aesthetics matter. Made of solid copper, these tacks are...

The Nautos Line Single Swivel series offers a comprehensive range of high-performance, swivel-mounted single blocks designed for marine rigging systems. Whether you're working with 28 mm, 39 mm, 57 mm sheave diameters — or configurations with fixed...

The Holt A4 Stainless-Steel Locking Wire offers a dependable and corrosion-resistant solution for securing nuts, bolts, clevis pins and other critical fastenings on your vessel. With a 0.9 mm diameter made from Grade A4 (AISI 316) stainless steel and...

The Nautos Ball Snatch Block offers a reliable and easy-to-operate snatch-style block designed for rigging and deck systems on sailing vessels. Available in two size variants (30 mm sheave diameter and 40 mm sheave diameter), this block features...

The Nautos Plain Single Swivel Series offers a range of compact and lightweight blocks designed for various sailing applications. These blocks feature a 45 mm sheave diameter and are constructed from durable materials to ensure reliable performance in...

The Nautos Organic Fiddle Swivel is a high-performance swivel block designed to deliver minimal friction, smooth operation, and enhanced durability. Nautos achieves this by combining composite cheeks with aluminium races, producing near-zero friction...

The Holt Nautos Organic Single Swivel is a high-performance sailing hardware accessory designed for precision, durability, and smooth operation. Engineered for modern sailboats, this single swivel ensures effortless rotation under load, making it ideal...

The Holt Flag Clip Al 4066 is an essential accessory for any maritime enthusiast seeking to display flags securely aboard their vessel. Constructed from durable marine-grade aluminum, this flag clip is engineered for longevity and resistance to...

The Holt SS A4 Hex / HD Screws are robust, marine-grade fasteners crafted from A4 (316) stainless steel, ideal for withstanding Ireland’s aggressive coastal conditions. They provide excellent resistance to corrosion and pitting, making them...

Holt Ss A4 Clevis Pins The Holt SS A4 Clevis Pins are robust, marine-grade fastening pins made from A4 (AISI 316) stainless steel, designed specifically for use in marine applications where saltwater exposure is a constant concern.These pins are part of...

The Nautos Composite Cam Cleat 91025 is a high-performance, marine-grade cleat designed to hold control lines securely and release them smoothly under load. Thanks to its two rows of high-load ball bearings, this cam cleat minimises friction, allowing...

The Nautos Automatic Ratchet block from Nautos brings next-level rigging control to sailing systems. Designed for boats where efficient line management and quick reactions matter, this block features a load-sensing ratchet mechanism - it rolls freely...

The Holt Brass Drain Bush Set (HT7035) is a premium accessory crafted for sailboat mast, boom, and deck drainage systems. Designed to replace worn or corroded bushes, this set ensures smooth operation and water flow, while preserving structural integrity...

The Holt Copper Nails are premium marine-grade nails supplied in prepack bundles for boat building, repair and restoration work. Offering excellent corrosion resistance, these copper nails are ideal for the harsh Irish marine environment. Whether you're...

The Holt Nautos Wintec Wind Vane is a precision wind indicator designed for sailboats, offering responsive and accurate performance in light to stronger winds. Available in two popular sizes — 12″ (HT91170) and 15″ (HT91180) — it...

The Holt Stainless-Steel Rudder Clip is a reliable retaining clip designed to secure the rudder blade in place on dinghies such as the Laser/ILCA class. Its stainless steel construction ensures durability and corrosion resistance - particularly...

Allen tiller extensions. High grade aluminium tiller extensions with rubber golf club handle grips.

Holt’s Blue Block series offers reliable replacement blocks for Laser and Pico dinghies, designed to keep your rigging smooth and efficient on Irish waters. Available in several configurations — single block, block with becket, or joined twin...

The Holt Laser Batten Set (HT7010) is a high-quality replacement set designed for Laser® sails, including the Mk1 Standard, Radial, and 4.7 models. These battens are ideal for club sailing, training, and recreational use. Please note that they are...

The Holt Self Bailer S/S HA 4555B is a premium one-way drainage valve designed to automatically eject water from a hull once the craft is moving, while preventing ingress when stationary. Crafted with stainless-steel components for durability, this self...

Holt HT7166 Laser Replacement L1 Toe Strap - 870mm Ultimate Laser toe strap offering total connection between the sailor and boat. Maximum width, distributes pressure away from the foot allowing you to hike harder for longer. Holt parts are high quality...

The Holt S/S Plate with HT2021F Dynamic Fork Blocks (model HT7008) is a stainless-steel replacement plate designed for dinghies such as the ILCA / Laser class. It features a stainless steel mounting plate fitted with twin 20 mm dynamic fork-headed blocks...

Holt Replacement Cleat Plate Complete for the Laser® hull. Features Holt HT91026 Cleates with Holt HT91182 Wide Angle Fairlead. Supplied assembled and ready to fit to your boat. The base uses the same hole spacing and mounting location as the...

Set of 3 MK2 tapered battens suitable for a Laser sailing dinghy. These Laser battens are made specifically for the new design Laser MKii sail and they are tapered towards the end. The sail battens are made by Holt and are a replica product. This product...

Holt’s mast and boom assembly replacements are engineered to give ILCA/ Laser dinghy sailors a high-quality, fit-for-purpose spar set at budget-friendly levels. These assemblies are especially suited for club sailing, training, or casual use,...

Holt HT91104 Nautos Laser L1 Replacement Stainless Steel Gooseneck Holt parts are high quality replacements that perform the same function as the original part. They should not be confused with official parts bearing the Laser® registered trademark...

Holt HT7003 Laser Replacement L1 Rudder Head With Ring Holt Replacement Rudder Head suitable for the Laser® hull. High quality replacements that perform the same function as the original part. They should not be confused with official parts bearing...

Holt HT7111 Laser Replacement L1 Swivel Vang Assembly Laser Vang Assembly Kit - consists of: 1 x Vang Unit With Cleat (additional wedge for optional higher cleat angle with fastenings) 1 x High Tension Top Block With Kicker Key 1 x Double Block &...

Holt Laser Turbo – XD Powerpack Kit including all the blocks and ropes needed to upgrade your cunningham and outhaul. Cunningham and Outhaul Kit: 1 x Cleat Base With Two Cleats And Over Fairleads 1 x Stainless Steel Block Base With 2 20mm Dynamic...

High quality, replica upper mast for Pico Sailboats 

Elevate your kayaking experience with the Hobie Kayak Cheek Block model number 81450001. This essential component is designed to optimize the performance of your Hobie kayak's control systems, particularly for rudder lines and other deck-mounted...