45 gram replacement gas cylinder for Gas Inflation Life Jackets. Generally suits 220N Lifejackets but very important to check the correct size before fitting.  Size of Cylinder is normally printed on bladder or the label of jacket.

The Lewmar Helm Shaft Seal is an offical replacement for the Lewmar Cobra Input Helms.

The Lewmar Size 00 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 0

The Lewmar 30-48 Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 48ST Lewmar part no: 45000029 Part Diagram The diagram below shows the Lewmar 30ST...

The Lewmar 15-16ST Winch Gear Spindle Sleeve is an official spare part for the Lewmar. Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 15-16ST Lewmar part no: 45000033 Part Diagram The diagram below shows the Lewmar...

The Lewmar 24-40ST Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 24ST - 40ST Lewmar part no: 15000378 Part Diagram The diagram below shows the Lewmar...

The Lewmar 16ST Stripper Ring Replacement Kit is a direct official replacement part for the Lewmar 16ST Windlasses. Parts Diagram The Lewmar 16ST Stripper Ring Replacement Kit is part 7 from the diagram below:  

The Lewmar Winch Replacement Stripper Ring suits V1, V2, and V3 series gypsies on Lewmar Windlasses. Its function is to strip the line from the self-tailing jaw without getting jammed up. Feature Suits Lewmar V1, V2, V3 plus Concept Gypsies

The Lewmar Small Cam Fairleads can be fitted using screws from the existing cam cleat and help retain the line when not jammed in the cleat. Features Black Nylon Easily installed on existing small cam cleats from Lewmar Max 8mm...

The Lewmar Delrin Balls Size 0 replace the ball bearings on your Lewmar Blocks. Bag of 100 replacement Delrin balls to suit Lewmar blocks. Please refer to the specification of each size for more details. Features High strength, Low...

The Lewmar 30-40ST Gear Spindle Replacement is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 40ST Lewmar part no: 48000506 Part Diagram The diagram below shows the...

The Lewmar 15ST - 70ST Winch Collet Replacements are an official spare part for the Lewmar Windlasses range from 15ST EVO series to 70ST EVO series. Come sold as pair Part Diagram The Collets are shown in the image below as part no. 3.

The Lewmar Size 2 Ball Loader comes with White Screws and allows you to take off the cars on your Lewmar Size Track without the ball bearings escaping. Specifications Product Type: Spares Boat Type: Sail

The Lewmar Size 2 Ball Loader comes with White Screws and allows you to take off the cars on your Lewmar Size Track without the ball bearings escaping. Specification Product Type: Spares  

Made from state-of-the-art materials developed by the automotive industry and refined for the marine market, Lewmar cleats enhance performance in durability, strength and lubrication. Features Low line entry load High holding load Constant tension...

Replacement top cap and O-ring kit for the Lewmar Ocean and EVO range of winches. Lewmar spare part no: 48000443 Features O-ring and Top Cap suit the Lewmar 14/16ST winches Official spare part from Lewmar

Lewmar 30ST-56ST Winch Top Cap Replacement Kit is an official spare part from Lewmar for use on their sailing winches. Features High-strength black nylon Suits Lewmar 30ST - 56ST winches older models with 4-hole top Download Datasheet ...

Lewmar Traveller Car Size 1 End Caps sold as a pair with screws included. Features Official replacement part from Lewmar Comes with 4 x installation screws Lewmar Size 1 Traveller Car

Ideal for use with hand-held loads, Lewmar's control Blocks feature lightweight, performance load-bearing capacity. MRT(Metal Replacement Technology) and a stainless steel central race and balls provide a weight advantage, while Long Fibre Technology...

The Lewmar Small Hatch Handle Kit fits the Lewmar Flush, Low Profile and Coastline Hatches. Installation screw included. Features Suits the Coastline, Flush or Low Profile Hatches Small left handle in grey

Lewmar Standard Portlight Handle Kit to fit the following portlights: Standard portlight, sizes 0, 1, 1RE, 2, 3, 4, 4L, 4R, 5 & 7RE Standard portlight - Bavaria models: barrel, double barrel, long port, mitred port aft, mitred port fwd, mitred stbd...

Lewmar Size 1 Ocean Car Buffer Kit has replacement end caps for the Ocean series of Lewmar Travellers. Comes with screws and everything needed to replace the old unit's buffers.

The Lewmar 50mm Synchro Blocks are engineered for speed, efficiency, and superior handling. We use a combination of scientifically optimised block geometry, a Free-Spin bearing, and a self-aligning head to reduce friction and increase efficiency by up...

The Lewmar 34ST/40ST Winch Drum Bearing Kit are an official replacement part for Lewmar Winches: 34-40 series. Parts Diagram The Lewmar 34ST/40ST Drum Bearings are shown as part no. 9 below:  

The Lewmar 30mm Single Block Max Line 8mm is ideal for use with hand-held loads. Lewmar’s Control Blocks feature lightweight, performance load-bearing capacity. MRT (Metal Replacement Technology) and a stainless steel central race and balls...

The Lewmar Retro Fit Vents can be fitted to the acrylic lens of any Lewmar hatch or to the deck of your boat. Features Made from the same rugged composite used in many Lewmar hatch and winch parts Styled to match the Low and Medium Profile...

The Lewmar Size 70 Hatch Covers fit the Lewmar Ocean Model Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 70

The Lewmar Low Profile Hatch Seal Kit replaces the waterproof seal on your size 18 Lewmar Low Profile Hatches. Features Genuine spare parts from Lewmar Waterproof seal Fits Low Profile Size 18 Hatches Lewmar part no: 360875999  

The Lewmar SZ2 Traveller Track End Caps are the official replacement parts for the SZ2 car tracks from Lewmar. Features Sold as a pair Material: Black nylon Comes complete with fasteners for installation.

Lewmar External Hatch Handle to suit the Coastline & Ocean Hatch models. Features Fits Lewmar Ocean and Coastline hatches size 30-77 Genuine spare part from Lewmar Sold 1 per pack

The Lewmar Manual Recovery Pawl Kit (Fall Safe) suits the V1/V2/V3/Go Series of Lewmar Windlasses. Parts Diagram The Lewmar Manual Recovery Pawl Kit is shown below as part no: 28,12,29,18,33,19 sold together in one pack.

Ideal for use with hand-held loads, Lewmar’s Control Blocks feature lightweight, performance load-bearing capacity. MRT (Metal Replacement Technology) and a stainless steel central race and balls provide a weight advantage, while Long Fibre...

Lewmar Catch Block for Low & Medium Profile Hatches Features Genuine Lewmar Hatch replacement part Comes with rivets and washers to attach Fits Low Profile / Medium Profile Lewmar part no: 360924992 Black version

Lewmar Replacement Catch Block for Low & Medium Profile Hatches. Features Genuine Lewmar Hatch replacement part Comes with rivets and washers to attach Fits Low Profile / Medium Profile Lewmar part no: 360924992 Grey version

The Lewmar Size 1 Standup Car Conversion Kit converts your shackle type car system to a standup version. Features Lewmar Size 1 Easy to install Suits Lewmar's NTR travellers

The Lewmar 30mm Double Block with Becket is ideal for use with hand-held loads on sailing craft. They are lightweight with high load-bearing capacity. MRT (Metal Replacement Technology) and stainless steel central race ball bearings provide a...

Lewmar DC1 Single Rope Clutches have a series of smooth, in-line and parallel rings hinged at the base. The line is run through these rings, which are then tilted by a single connecting lever. When tilted, the rings force the line to snake through...

The Lewmar 30mm Double Block with Becket is ideal for use with hand-held loads on sailing craft. They are lightweight with high load-bearing capacity. MRT (Metal Replacement Technology) and stainless steel central race ball bearings provide a...

The Lewmar Size 60 Hatch Covers fit the Lewmar Low and Medium Profile Hatches.  Features Protects hatch against dirt and UV damage Colour: Navy Size: 60

The Lewmar 48ST Chrome Feeder Arm is an official replacement spare part for the Lewmar 48ST Windlass. Part Diagram The Lewmar 48ST Chrome Feeder Arm is shown as part no. 3 in diagram below: