The 10" Road wheel for the Dart 16 road base. A must if you are doing a lot of towing. Specification Diameter: 10"

The 8" road wheel fits the Laser, Pico, Vago, Bahia and Funboat road bases. A must if you are doing a lot of towing. Specification Diameter: 8"

ILCA 7 Mk11 Batten Set, approved by ILCA for all class events. ILCA 7 Batten set complete with all 3 battens and end caps. This set is suitable for the MK2 sails.

Laser batten tips that will replace the old style tips. This pack will able you to replace the ends of all 3 battens.

ILCA approved batten set to suit ILCA 4 & ILCA 6 Sails - Set of 3 - Also suits Laser 4.7 and Laser Radial. Complete batten set for ILCA 4 and ILCA 6 sails. Includes three battens with end caps. Compatible with existing Laser 4.7, Laser Radial, and...

Irish national flag for use with ILCA Laser Sails requiring sail identification. Specification Size: 567 mm x 337 mm Rules If required by the Notice of Race and the Sailing Instructions, a national flag with a nominal size of 567 x 337 mm shall be...

The Laser Red Rhombus is for the identification of ladies when racing in mixed fleets. Sails used in the women’s events shall carry a red rhombus above the top batten pocket on both sides. Features World or regional (continental)...

ILCA Laser Black Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. Approved for ILCA 6 & ILCA 7 & Laser Radial and Full Rig. Features Class legal sail numbers for ILCA 6 & ILCA 7 and...

The Laser Red Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. The 12" versions are popular for Laser 4.7,  Laser Pico and Funboat. We can attached these numbers to the sail for you...

The Laser Black Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7, Laser Pico and Funboat. We can attached these numbers to the sail for you however there...

The Laser Red Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7,  Laser Pico and Funboat. We can attached these numbers to the sail for you however...

ILCA 7 approved Laser Main Sail - Class compliant for all ILCA events. This sail also suits the Laser Performance L1 standard rig. Specification Mk2 (Standard Rig) cut sail Optional Extras Sail Numbers - Uses 4 x 12" Red Sail Numbers - 8 x 12"...

ILCA 6 approved Laser sail by Pryde - Class compliant for all ILCA events. This sail will also suit the Laser Radial rig. ILCA 6 Sail Numbering Guide Download the ILCA 6 Sail Numbering Guide here .input-wrapper a { text-decoration: none; /...

ILCA 6 approved Laser sail by Hyde - Class compliant for all ILCA events. This sail will also suit the Laser Radial rig. Class legal racing sail for the ILCA 6. Made from a heavy weight 3.8 oz Dacron for long sailing life and comes folded. Includes sail...

ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This gooseneck also suits Laser Performance models in Standard, Radial, and 4.7 rigs Specifications Material: Stainless steel Fasteners 6 x M4.8 x 12mm Stainless Steel Rivets -...

Stainless steel kicking strap plate for Standard, Radial, and 4.7 lower mast attached with rivets. Not inlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

ILCA Laser Boom Plug - Inboard end to fit boom to lower mast via gooseneck fitting. Use a 12mm x  Specification Material: Plastic

Lower mast, base plug used on the ILCA6, Laser Radial, Funboat, and Pico, lower mast, includes a grooved feature to prevent sand entrapment and wear on your boat. Important Fixed in place with a 4.8 mm countersunk head rivet - It is important to use a...

Fits the Laser Standard and 4.7 lower mast, plastic mast foot plug with moulded in sand grooves, change it regularly to protect your mast hole.

Laser Performance Pico/Funboat Upper Mast Base Plug black plastic fits on the bottom of the top mast, fixed with 2 x rivets (sold separately). Specifications Material: Plastic Colour: Black

ILCA Laser Boom with Harken ball bearing blocks. Official ILCA approved for all ILCA events and suitable for all Rigs- ILCA 4, ILCA 6, ILCA 7. Features Harken Boom End and  Centre Mainsheet Blocks fitted Official ILCA approved Suits All modesl...

Plug black plastic fits on the top of the mast, fixed with rivets x 2 (sold separately). It can also be used as a Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

This large blue plastic Laser Boom Fairlead has a stainless steel insert to reduce chafing and allow larger lines with heavier loads. Features Suits the topaz deck fairlead Requires 2 x screw (6 mm x 25 mm) Specifications Material:...

The Clamcleat® CL211 Mk1 Racing Junior is a very strong allow cleat with a fairlead to guide the rope into the teeth. The specially shaped base means the CL211 Mk1  means it can be fitted to either curved or flat surfaces The CL211 Mk1AN...

Anodized aluminium tube with end plugs and sleeve fitted. A direct replacement for the top mast that comes on your Laser 4.7, Radial, or Standard rig. Suit all types of Laser sailing boats. The Laser Top Mast is too large for regular courier services, so...

The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similar sealant to keep the hull watertight. Features Will secure the rudder to the transom You can...

The Pico Toe Strap plate is used to spread the load when attaching toe strap or MK1/MK2 Laser friction pad. Specifications Material: Plastic Colour: Blue

Laser Toe Strap Padded in grey with XD logo. Internal plastic stiffener stops the Laser Toe Strap from turning over, heat sealed screw holes for easy fit. Features XD toe strap for maximum grip and control Loop will fit shockcord and toe strap...

The ILCA Laser Grab Rail Grommets are for attaching the Laser Grab Rail. The Grab Rail requires five per side. Grommets are supplied in a pack of ten which will complete one ILCA Laser Hull. Remember to put Sikaflex on before you attached the Grab Rail...

Holt Laser Grab Rail fits all Laser Performance and ILCA Dinghies - Two required per boat - It is recommended to use a sealant, such as Sikaflex 291i, to bed screws  Accessories Sikaflex 291i Sealant - Click here  

Official ILCA approved Nautos self-bailer ( Autobailer) - Suits all models ILCA and Laser. Complete autobailer assembly for the ILCA dinghy with bailer plate, chute door, bung, and screw. This is a class legal bailer with ILCA stamp on body of the bailer...

Standard&nbsp Bow eye fairlead for all Laser and ILCA rig sail boats   Acetal open-based and bullseye rope fairleads with or without stainless steel liner. Features Fixing Hole Size: 5mm Dist. Between Fixing: 5mm Weight: 30g

Aluminium deck cleat is designed to hold 12mm to 16mm rope under high pressure. Specification Material: Aluminium Rope diameter: 1/2 - 5/8" (12 mm - 16 mm) Hole diameter: 3 3/4" (95 mm) Length: 4 5/8" (118 mm) Width: 1 1/2" (37 mm) Height: 1 3/4"...

The Laser Harken Cammetrick cleat is similar to the Laser Cleat 91517, but this one is made of plastic. Harken Micro Cam Cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams for racing where...

ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low. How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

Laser Rudders Gudgeons by Holt - 2 Required per boat  Fasteners 2 x Sowester Pan Head Self Tappers per Gudgeon - Size  8 x 1 1/2"  Select size here

Replacement gudgeon for the ILCA dinghy and Laser sailboat. Two of these are mounted on the transom of the boat and used for attaching the rudder head. Installs with 4 screws (not included). Sold individually and made from a heavy duty plastic for long...

This ILCA / Laser tiller retaining pin secures the tiller to the rudder head. Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole to ensure solid fit.