The Harken 40mm Fiddle Block with Camcleat is the replacement for the Topper or Topaz Lower Kicker Block. Carbo fiddle line features high-load ball bearings with fitted races for low-friction operation. This kicker block is attached to the mast by an...

3:1 Topper Kicker to suit all models of Topper or Topaz sailing dinghies. Improve your performance on the racecourse. Sail faster with the Topper Harken Race Kit to suit the Topper and Topper Topaz boats. The Topper Harken Race Kit combines the...

Includes spring and a separate swivel for the shackle. Does not include fixing screws (5mm x 50mm CSK, see related products). Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include...

Aluminium tiller extension in Spectro grey anodised material suitable for the Topper Topaz Sailing Dinghy, including models: Uno, Race and RaceX.Suitable as a Topper/Topaz Tiller Extension when using a centre sheeting system. Features Aluminium...

This foil bag carries the Laser® daggerboard and rudder in a snug zipped-up bag and has the added feature of a mesh pocket on the side to hold all your ropes. Also with a side pocket for your Rooster tiller & extension...

Replacement eyelet for the boom on a Topper Topaz Kicker Tang for the Topper Boom.This Rooster Topper Tang connects the boom to the upper kicker block. Fitted with rivets

Rooster Topper TZST19 Clew Hook fits all Topper and Topaz Sailing Dinghies. It is manufactured in marine-grade stainless steel and simplifies the rigging process by eliminating the clew strap on the tie line Installation You will need to remove the...

Rooster Topper Mainsheet 7mm for the new centre sheeting system made from Rooster Polilite. Does not suit Topaz dinghies. Rooster Polilite mainsheet for the new centre main system - 13m x 7mmAvailable in Blue, Black or Red with coloured fleck...

Little Hawk Mk2 Wind Indicator to suit the Topper, Topaz, and Laser dinghies. The Little Hawk Mk2 brings all the benefits of the Little Hawk Mk1 Wind Indicator and mounts it in a secure manner at gooseneck height in front of the mast. Designed for...

Dyneema is a registered trademark of DSM Dyneema. Does not suit the Topaz. Improve your performance on the racecourse. Sail faster with the Topper Harken Race Kit. The Topper Harken Race Kit combines the long-lasting reliability of Harken hardware with...

Replacement Laser 42 Rudder Blade without stock or tiller and made from GRP.

Replacement centreboard/daggerboard foil for Laser 42 sailing dinghy. Made from GRP- Designed especially for the Laser 42.

Sunfish sail ring pack of 3 Laser Bailer Bands that are supplied in a pack of four. Having trouble with the Bailer flap lifting back up? Take the bailer off the boat, give it a good clean, and check that the two bands are still attached. If not, this...

The Bug Yellow Zest Race Mainsail is a popular upgrade from the standard Bug Mainsail and when bought alongside the unique Bug Powercurve Race Mast, converts the Bug into the ideal learn to race boat. The Bug Blaze Race Mainsail is a 5.3 m² sail...

The Laser Vago Mast 89007 is a fully rigged mast complete with all fittings, halyards, standing rigging wires, and spreaders. Please note this item is not held in stock and comes with a lead time. Please contact us for a lead time and delivery...

Replacement Mast for the Laser Vago sailing dinghy without rigging included. Fully rigged mast complete with all fittings, halyards, standing rigging wires, and spreaders Please note this item is not held in stock and comes with a lead time. Please...

The RS Laser Vago 9.31 m² rolled mainsail with clear visor panels in Mylar, including a long sail bag. Specification Size: 9.31 m²

The Laser Vago Standard 7.56 m² rolled main sail with white panels and reefing points made from Dacron including long sail bag. Specifications Material: Dacron Panel colour: White Size: 7.56 m²

Laser Performance Vago Boom - Fully Rigged.

Genuine RS Laser Vago Gennaker Sails - Standard model VAG-SA-300 including Sail Bag The Laser Vago race gennaker/kite is the sail at the front of the boat to be used when going downwind and reaching. The Vago race kite is larger than the standard Vago...

Laser Performance Vago Gennaker Sock.

The Laser Vago Standard Gennaker 10.85 m² rip stop nylon in yellow including sail bag. Specifications Material: Nylon Colour: Yellow

Laser Selden Mast Step attached to the cross beam on your boat with 2 x rivets (sold separately). Connection bolt supplied for the Vago Mast. Features Attached to the main cross beam Weight (kg): 0,052  

These combined swivelling deck fairlead and cam cleat assemblies are used for the jib sheet on both sides of the boat. Requires 3 x rivets for attachment (sold separately). For the replacement cleat on its own (See Code: LS-91484).

The replacement Halyard Bag to suit the Laser Vago sailboats.

Laser Vago mainsheet is an 8 mm lightweight polypropylene main sheet. This mainsheet is used on the Laser Vago and Laser Bahia Laser Bahia and Vago mainsheet block assembly. Does not include standup pulley (See Code: LS-91333).

Trapeze Loop with block pulley for the Laser Bahia sailing dinghy.

Mesh gennaker sock in grey to cover and protect the gennaker on your Laser Bahia.

Laser Bahia lower shroud wire and rope to suit the Laser Bahia Masts. Comes supplied with crimped eye to connect to deck (shackle not included). Specifications Weight: 0.09 kg Dimensions: 15 × 12 × 5 cm

Replacement Jib Halyard for the RS Laser Bahia sailing dinghy with wire halyard and rope tail. Genuine Bahia Spares Laser Bahia jib halyard complete with wire halyard and rope.

The replacement eyelet for the deck of the Laser Bahia or the bow of the Dart 16, screw in the Bow eye. Specification Weight (kg): 0,030  

This infused GRP centerboard is a multi-boat centerboard, compatible with both the RS Bahia and Vago (Formerly the Laser Bahia and Laser Vago)

Replacement Inspection Port for the Laser Bahia and Laser Bug. This inspection hatch cover comes in white and has two parts: the base, which you fix to the deck, and the top lid, which screws into the base. This hatch is commonly used on the Bahia, Vago,...

Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder. Rudder pivot bolt set suitable for the Bahia, Stratos & Vago NB – The wing nut may be of a different shape.

The trapeze kit for the Laser Bahia has two handles, two cleats, and two trapeze lines made from stainless steel wire. Optional trapeze pack for racing. Bahia trapeze kit for your Bahia, which includes everything you need to upgrade your Bahia and start...

Laser Performance Bahia Mast Shroud - Single Features Single shroud wire only Use a retaining bung to lock the shroud

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and is constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately). Specifications Weight: 0.008...

Gnav slider runs on top of boom, connects to the gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.