The RS Laser Vago 9.31 m² rolled mainsail with clear visor panels in Mylar, including a long sail bag. Specification Size: 9.31 m²

The Laser Vago Standard 7.56 m² rolled main sail with white panels and reefing points made from Dacron including long sail bag. Specifications Material: Dacron Panel colour: White Size: 7.56 m²

Laser Performance Vago Boom - Fully Rigged.

Genuine RS Laser Vago Gennaker Sails - Standard model VAG-SA-300 including Sail Bag The Laser Vago race gennaker/kite is the sail at the front of the boat to be used when going downwind and reaching. The Vago race kite is larger than the standard Vago...

Laser Performance Vago Gennaker Sock.

The Laser Vago Standard Gennaker 10.85 m² rip stop nylon in yellow including sail bag. Specifications Material: Nylon Colour: Yellow

Laser Selden Mast Step attached to the cross beam on your boat with 2 x rivets (sold separately). Connection bolt supplied for the Vago Mast. Features Attached to the main cross beam Weight (kg): 0,052  

These combined swivelling deck fairlead and cam cleat assemblies are used for the jib sheet on both sides of the boat. Requires 3 x rivets for attachment (sold separately). For the replacement cleat on its own (See Code: LS-91484).

The replacement Halyard Bag to suit the Laser Vago sailboats.

Laser Vago mainsheet is an 8 mm lightweight polypropylene main sheet. This mainsheet is used on the Laser Vago and Laser Bahia Laser Bahia and Vago mainsheet block assembly. Does not include standup pulley (See Code: LS-91333).

Trapeze Loop with block pulley for the Laser Bahia sailing dinghy.

Mesh gennaker sock in grey to cover and protect the gennaker on your Laser Bahia.

Laser Bahia lower shroud wire and rope to suit the Laser Bahia Masts. Comes supplied with crimped eye to connect to deck (shackle not included). Specifications Weight: 0.09 kg Dimensions: 15 × 12 × 5 cm

Replacement Jib Halyard for the RS Laser Bahia sailing dinghy with wire halyard and rope tail. Genuine Bahia Spares Laser Bahia jib halyard complete with wire halyard and rope.

The replacement eyelet for the deck of the Laser Bahia or the bow of the Dart 16, screw in the Bow eye. Specification Weight (kg): 0,030  

This infused GRP centerboard is a multi-boat centerboard, compatible with both the RS Bahia and Vago (Formerly the Laser Bahia and Laser Vago)

Replacement Inspection Port for the Laser Bahia and Laser Bug. This inspection hatch cover comes in white and has two parts: the base, which you fix to the deck, and the top lid, which screws into the base. This hatch is commonly used on the Bahia, Vago,...

Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder. Rudder pivot bolt set suitable for the Bahia, Stratos & Vago NB – The wing nut may be of a different shape.

The trapeze kit for the Laser Bahia has two handles, two cleats, and two trapeze lines made from stainless steel wire. Optional trapeze pack for racing. Bahia trapeze kit for your Bahia, which includes everything you need to upgrade your Bahia and start...

Laser Performance Bahia Mast Shroud - Single Features Single shroud wire only Use a retaining bung to lock the shroud

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and is constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately). Specifications Weight: 0.008...

Gnav slider runs on top of boom, connects to the gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.

Plastic replacement Bhaia mast heel. This part is also known as the 'Laser Bahia Mast Foot', not to be confused with the Laser Bahia Mast Step.

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction, riveted to the cross beam, used to pin the mast foot to the cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts Specifications Weight: 1 kg Dimension: 120 × 5 × 4 cm

The replacement sheave to suit the mast head on all Laser and Bahia sailing boats. The Laser Sheave is made from nylon plastic and fits onto the top of the mast with a clevis pin 3/16" x 1" (sold separately). Specification Material: Nylon plastic

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats. Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until it's put under...

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder, see code LS-8513.  Specification Length: 710 mm

The Laser Tiller without extension for the Bug and Pico Sailboats comes with a cleat and attachment fitting to connect the flexible joint from the tiller extension. Suits Laser Pico and Laser Bug. Laser Pico tiller arm, which also fits the Laser Bug...

The Laser Pico has a simple downhaul system equipped with a self-releasing cleat for when you run a ground.

The official replacement Laser Rudder Head with aluminum tiller for the Laser Pico or Bug Sailboats is supplied without the rudder, tiller, or tiller extension. For a full rudder with tiller kit, see code LS-8513. This rudder head is the new style...

Laser Pico / Bug and Fusion Rudder Assembly with Blade, Head, Tiller & Tiller Extension Specification Material: Aluminium

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs, top and bottom. Aluminium rudder blade for the Laser Bug and Laser Pico, which comes complete with the plastic top and...

The Laser Gudgeon fits the Laser Pico and Funboat sail craft, constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold separately and comes complete with a spacer and rudder retention spring clip...

Replacement Rudder Retaining Clip for the Laser Pico range of sailboats. Fits on the gudgeon bracket on the transom of the dinghy to secure the rudder when in position. Specification Material: Stainless steel

Talamex Drop Nosed Pins are manufactured from high-quality AISI 316 marine-grade stainless steel for excellent strength and corrosion resistance. Designed for reliable fastening in marine environments, they are available in a wide range of diameters and...

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

Direct replacement for the Laser Bug and Pico Daggerboard, constructed from aluminium. Official Foil from Laser Sailboats. Comes with end plugs and a bottom. In recent years, the Laser Pico and Laser Bug daggerboards have been made tougher so they will...